Greater London · Heat pump installation
Air Source Heat Pumps in Grahame Park
Expert air source heat pumps for Grahame Park: a survey or diagnosis, a fixed price, careful work and proper paperwork. Ask us for a fixed-price quote.
- Deciding which kind of heat pump suits the home
- Replacing a combi boiler with a heat pump
- Questions about the Boiler Upgrade Scheme
About our air source heat pumps in Grahame Park
Installing an air source heat pump in a home is zero-rated for VAT until 31 March 2027, then 5%. This is HMRC’s energy-saving materials relief, which applies to homes rather than businesses. For air-to-air systems, we confirm the VAT on your quote. This is general information, not tax advice. The work covers radiator systems, air-to-air heat pumps and hot water cylinders, and people most often call us about plans to switch to electric heating with a heat pump and a boiler that’s getting old.
For flats in Grahame Park, the lease, the freeholder and the rules for flats all come into it. Permitted development limits are different for flats, and we check before designing.
The records are your system’s health record: what was fitted or found, what was done and when. It makes the next visit quicker and any warranty question simpler and it’s worth keeping safe.
- Place
- Grahame Park (NW9, NW7, NW4)
- Wider area
- Greater London
- Accreditations
- F-Gas certified, NICEIC approved, MCS
- Quotes
- A fixed-price quote up front
- Typical price
- £8,000–£16,000 (0% VAT on homes), before the grant
- Telephone
- 07833 053749
- Reviewed
- 30 October 2026
What we do, step by step
Our engineers bring the tools, gauges and access equipment the job needs. You only need to give us clear access to the units, or their planned positions, and to the fuse board. On site, the work takes a few days for most air-to-water installations, with air-to-air systems often quicker. The more we can see beforehand, the smoother the visit to Grahame Park will be.
- It starts with a conversation about the home, the existing heating and your plans.
- On the visit we calculate what every room loses on a cold day, then check the radiators, room for a cylinder and outdoor unit options.
- The price comes back fixed and in writing, with the grant and VAT shown line by line.
- The outdoor unit, the indoor equipment and the controls are installed and connected.
- Once it’s running correctly, the MCS certificate is issued and we show you the settings.
Before we arrive
- Make sure we can reach the consumer unit or fuse board
- Make sure someone can let us in at the agreed time
- Let us know where we can park and unload
Get a fixed-price quote
To help us quote: the address and the type of property, photos of the rooms or units, the make and model of any existing system and anything you’ve noticed, such as an error code or a noise. Then ring us on 07833 053749 or send an email.
Related advice
Aftercare tips
A little care keeps the system in better shape. Our advice:
- Clear leaves and debris from the outdoor unit
- Keep the MCS certificate with the manufacturer’s paperwork
- Avoid switching the heat pump on and off often
If anything does not seem right after installation, phone us on 07833 053749 or fill in the contact form and we’ll talk it through. A yearly service is a good habit.
Let the heat pump run steadily rather than switching it on and off as explained at handover.
What the work involves, system by system
Air-to-air heat pumps
Since 2025, air-to-air heat pumps can also be permitted development in England, subject to the conditions. A unit used solely for cooling is not covered, so check with the council.
Outdoor unit position and planning
Flats have tighter limits, and an Article 4 direction can remove permitted development rights. Listed buildings also need separate consent, and we check the position for your property.
Rented and managed buildings
Portfolio owners often want one contractor and one number. We work across London and the South East, so a run of properties can go into one programme and kept to a regular schedule.
We also work for facilities teams in offices, schools and public buildings in Grahame Park and across Greater London. Work can be phased by floor, zone or building to keep disruption down.
Air source heat pumps around Grahame Park
About 54% of homes in Grahame Park and the neighbourhoods around it have been built since 2000, according to the Valuation Office Agency’s council tax figures, and about 73% of households live in flats, according to Census 2021 figures. Newer homes usually lose less heat, which tends to suit a heat pump well. For flats, the first questions are where an outdoor unit could go, whether a cylinder fits and what the lease allows. For a London home, the outdoor unit position and the MCS noise check need careful planning.
Heath Hall, roughly 3.5 miles south-east, is a reminder to check your home’s listing status: permitted development doesn’t cover listed buildings. If your home is near Mill Hill Broadway station and heated by a gas boiler, an air-to-water heat pump can replace it where the survey shows it suits.
Grahame Park is about 1 mile south-east of Burnt Oak, in Greater London. From the centre of Grahame Park to the outskirts, our engineers cover air source heat pumps, from small jobs to large ones. Our list for Greater London has 764 entries, and Grahame Park is one. We also work in London, around 9 miles away.
Not far from Grahame Park, a recent job of ours was on East Hill, Wandsworth (SW18), about 10 miles south: installing a Daikin wall-mounted unit in the open-plan living area.
Here we cover the NW9, NW7 and NW4 postcode area. The M1 serve Grahame Park, which keeps journeys to surveys and visits simple. Close by, we work in Burnt Oak (1 mile north-west), Mill Hill (1 mile north), The Hale (2 miles north-west), Edgware (2 miles north-west) and Little Stanmore (2 miles west). We also work in nearby towns such as London (9 miles south-east), City of Westminster (7 miles south-east), Marylebone (7 miles south-east) and Kensington (7 miles south).
Around Grahame Park
We fit and service air conditioning in homes and premises around Sunny Hill Park, Blessed Dominic Catholic Primary School and The Greyhound pub and the streets around them. The closest station to Grahame Park is Mill Hill Broadway station, about 0.9 miles north of the centre. Well-known places in the area include Broadwalk Centre (1.7 miles north-west) and Church Farmhouse Museum (0.8 miles south-east). The countryside around Grahame Park includes Copthall South Fields and Parliament Hill.
Nearby places to Grahame Park
Other services in Grahame Park
Questions from Grahame Park
Will a heat pump in Grahame Park need planning permission?
The answer turns on the property and where the outdoor unit would sit. Historic England lists about 8 buildings and structures within half a mile of the centre of Grahame Park. On a house, an air source heat pump can often go ahead under permitted development, with an outdoor unit of no more than 1.5 cubic metres and an installation that meets MCS 020(a), which includes a noise check. Those rights do not reach the grounds of a listed building, and conservation areas rule out walls or roofs facing a road. If that might affect you, we ask Barnet council, which is normally the planning authority for Grahame Park.
Can I get the Boiler Upgrade Scheme grant in Grahame Park?
Yes, the scheme covers homes in England, including Grahame Park, if they qualify. It gives £7,500 towards an air-to-water or ground source heat pump, or £2,500 towards an air-to-air heat pump that replaces the fossil-fuel heating and meets the whole home’s heating need. The installer applies, and we’re MCS certified.
What warranty do I get?
Warranty comes from the manufacturer and depends on the brand and product. Daikin, for example, gives a standard 2 years on split air conditioning and we explain the terms for your brand on the quote.
Why use an F-Gas certified company?
For refrigerant work, both the engineer and the company need the right F-gas credentials. Ask to see proof before booking anyone, and we’re happy to show ours.
What accreditations do you have?
AirCon Doctor is an F-Gas certified company, with NICEIC approval for electrical work and MCS certification for heat pumps. We’re also Checkatrade members.
Do you work on commercial properties?
Yes. Homeowners, landlords, agents and businesses all book us in Grahame Park and across Greater London. Let us know who the records should go to.
Which brands do you work with?
The main ones, including Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries and Hitachi. For a new system, we suggest the make and model that suit the property and explain why.
A customer’s words
“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”
David W., Haywards Heath