Greater London · Heat pump installation
Air Source Heat Pumps in Gillette Corner
F-Gas certified and NICEIC approved, we cover Gillette Corner for MCS certified installation of air source heat pumps for heating and hot water, with the Boiler Upgrade Scheme grant applied for. Fixed-price quotes and a 24/7 emergency line.
- Plans to switch to electric heating with a heat pump
- Checking whether planning permission is needed
- Deciding on the outdoor unit position
Gillette Corner: your questions answered
Can I fit a heat pump in Gillette Corner without planning permission?
The answer turns on the property and where the outdoor unit would sit. The Osterley Park Conservation Area is close to the centre of Gillette Corner. A heat pump on a house can be permitted development if it meets the conditions, including the MCS noise check, but not within the grounds of a listed building, and in a conservation area the outdoor unit can’t face a road. Where necessary, we check with the planning department at Hounslow council, normally the authority for Gillette Corner.
Do I need permission to put air conditioning in my flat in Gillette Corner?
In many cases, yes, once the lease and the building’s rules are checked. We look at where the outdoor unit could go, such as a balcony, flat roof or rear wall, and write it up for the freeholder or agent.
What does F-Gas certified mean?
The law says any company working on equipment containing F gas has to be certified, and the engineers need their own qualifications. It’s how you know the refrigerant is being handled legally and safely.
Do you work on systems someone else installed?
Yes. We start with a proper look and tell you honestly what we find, including anything about the original installation that needs putting right. Any work is priced before it goes ahead.
How quickly will you reply?
You’ll hear from us the same working day. For a breakdown that can’t wait, call our 24/7 emergency line.
Do I need to service the system to keep the warranty?
Check the manufacturer’s terms. Some warranty terms require the system to be serviced regularly by a qualified engineer, so it’s worth checking. Either way, keep a record of every service.
Is there VAT on a heat pump?
For homes, 0% until 31 March 2027, under HMRC Notice 708/6, then 5%. For air-to-air systems, we confirm the VAT on your quote.
Air source heat pumps in Gillette Corner, done properly
Many air source heat pumps can be installed as permitted development in England, without a planning application. Conditions include a maximum outdoor unit size of 1.5 m³, compliance with MCS 020(a), use for more than cooling alone and a site outside the curtilage of a listed building. We look at the planning position for your home during the survey. The work covers hot water cylinders, underfloor heating and air-to-water heat pumps, and common reasons people get in touch are choosing between air-to-water and air-to-air and planning and permitted development questions.
Homes in Gillette Corner are often flats and terraces, where outside space is limited, and that decides which kind of heat pump works. Air-to-water needs room for the outdoor unit and normally a cylinder, while an air-to-air system needs less space.
Warranty on the equipment is the manufacturer’s own, on the manufacturer’s terms, and we explain those terms on your quote. Terms differ from brand to brand, and we are happy to talk you through them.
- Place
- Gillette Corner (TW7, TW8)
- Wider area
- Greater London
- Certified
- NICEIC approved, F-Gas certified, MCS
- Typical price
- £8,000–£16,000 (0% VAT on homes), before the grant
- Replies
- We reply the same working day
- Quote
- Fixed-price quote after a site survey
- Phone
- 07833 053749
- Updated
- 30 October 2026
Keeping the system healthy
Aftercare is straightforward, and it makes the next visit easier:
- Ask about the grant before you commit
- Avoid switching the heat pump on and off often
- Don’t block radiators or indoor units with furniture
Should you have questions after the install, phone 07833 053749 and we’ll talk it through. Annual servicing helps keep the system working well.
Let the heat pump run steadily rather than switching it on and off as explained at handover.
Nearby places to Gillette Corner
Also in Gillette Corner
Homes in Gillette Corner and heat pumps
About 51% of homes in Gillette Corner and the neighbourhoods around it were built between the wars, according to Valuation Office Agency council tax records. Whether the walls and loft have been insulated makes a real difference to the heat pump size for homes of that period. For a London home, the outdoor unit position and the MCS noise check need careful planning.
If your home is near Syon Lane station and heated by a gas boiler, an air-to-water heat pump can replace it where the survey shows it suits. Boston Manor, roughly 0.7 miles north-east, is a reminder to check your home’s listing status: permitted development doesn’t cover listed buildings.
Gillette Corner is about 2 miles north-east of Hounslow, in Greater London. Anywhere in TW7, we can help with air source heat pumps. Our Greater London coverage runs to 764 places, Gillette Corner among them. For properties nearby, see our London page (10 miles or so).
Our nearest recent job to Gillette Corner was on Richmond Hill, Richmond (TW10), about 2 miles south-east: installing a Mitsubishi Electric Zubadan multi-split system serving four bedrooms, the study and the living room: six indoor units in total.
Our working area takes in TW7 and TW8, every street of it. That includes properties on Wood Lane, Syon Lane and Darcy Road and nearby roads. Close to Gillette Corner, our area also takes in Brentford End (1 mile east), Spring Grove (1 mile west), Isleworth (1 mile south), Osterley (1 mile west) and Brentford (1 mile east). Further out, we also cover London (10 miles east), City of Westminster (8 miles east), Marylebone (8 miles east) and Kensington (6 miles east).
Near you in Gillette Corner
We fit and service air conditioning in homes and premises around The Green School, Coach and Horses pub and Boston Manor Park and the streets around them. Gillette Corner has its own railway station: Syon Lane station. Nearby you will also find West Middlesex University Hospital (0.7 miles south) and Musical Museum (1.5 miles east). The countryside around Gillette Corner includes Long Wood and Garden Lake.
What affects the quote in Gillette Corner
Our prices page gives typical ranges, and your quote is built on your job. The quote depends on:
- One-off work versus a regular service cycle
- Which make and model is being fitted or worked on
- How many units are involved
A single unit or a whole estate, we price it on the same basis: what needs doing, how we get to it and what it needs. The price is fixed before we start, with VAT shown clearly.
Before you get in touch
A few details help us quote accurately. When you get in touch, it helps to send:
- A short video of any fault, such as a noise or a flashing light
- A photo of the consumer unit with the cover closed
- Photos showing the indoor unit and the space around it
To help us quote: where the property is and what kind of building it is, photos of the rooms or units, the brand and model of anything already fitted and anything you’ve noticed, such as an error code or a noise. Then phone 07833 053749 or send an email.
Leave it or put it right?
From 1 April 2027, VAT on heat pumps in homes rises from 0% to 5%. If you are thinking about a heat pump, that date is worth knowing alongside your own plans for the property. In a London building, getting the freeholder’s or agent’s agreement can take a while, so it’s worth starting early.
Typical ranges are on our prices page, but your price depends on the job in front of us. Call for a fixed-price quote, and we will talk you through it.
Why choose AirCon Doctor in Gillette Corner
- Members of Checkatrade
- Enquiries answered the same working day
- An F-Gas certified company, as the law requires
- Manufacturer’s warranty terms explained on your quote
Take a look at how installs are priced or our accreditations and certificates.
How it works
Protection comes first: sheets over the floor and any furniture nearby, and we ask before moving anything. After that, anything electrical is made safe and we start. The work on site takes several days for an air-to-water system with a new cylinder, less for an air-to-air system, and we tidy up before we leave. Some blocks in Gillette Corner need contractor details in advance, so tell us what your building needs.
- It starts with a conversation about the home, the existing heating and your plans.
- On the visit we calculate what every room loses on a cold day, then check the radiators, room for a cylinder and outdoor unit options.
- You get a fixed-price quote, with any grant you’re eligible for and the VAT explained.
- The outdoor unit, the indoor equipment and the controls are installed and connected.
- Commissioning, MCS certification and a handover of the controls finish the job.
Getting ready for the visit
- Have the make and model of any existing unit to hand
- Let us know if the building has a permit or sign-in process
- Unlock any gate, garage or side passage we need
Getting a price
Photos are enough for some jobs; others need a visit first. Bigger systems, commercial sites and awkward pipe routes are normally surveyed on site. Either way, the quote is fixed before anything goes ahead.
Related advice
What a customer said
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager