Essex · Heat pump installation

Heat pump installers in Fox Street

Our engineers work in Fox Street on air source heat pumps. Diagnosis first, a fixed price and proper paperwork when we finish.

  • Checking emitters for a heat pump
  • Replacing a combi boiler with a heat pump
  • Finding a place for the outdoor unit

Air source heat pumps near Fox Street

About our air source heat pumps in Fox Street

As an MCS certified installer, we fit air source heat pumps for homes in Fox Street and the rest of Essex. Air-to-water systems feed your radiators or underfloor heating and hot water cylinder, while air-to-air systems heat rooms directly through indoor units and can cool them too. We’ll explain which type fits your home and why. The work covers air-to-air heat pumps, homes heated by oil, LPG or gas and underfloor heating, and the jobs we see most are choosing between air-to-water and air-to-air and questions about the Boiler Upgrade Scheme.

For a home around Fox Street that’s off mains gas and heated by oil or LPG, an extra £1,500 is available through the Boiler Upgrade Scheme until March 2027.

Think of the paperwork as the system’s health record: what was fitted or found, what was done and when. It makes the next visit quicker and any warranty question simpler and it’s worth keeping safe.

Location
Fox Street (CO7)
Wider area
Essex
Pricing
Fixed, in writing
Prices
Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
Certified
NICEIC and F-Gas, MCS
Enquiries
Answered the same working day
Call
07833 053749
Last updated
30 October 2026

Different systems, different jobs

Outdoor unit position and planning

Where the outdoor unit goes depends on airflow, access and the route into the house. Noise is part of the MCS 020(a) check, so we consider nearby homes too.

Heat loss surveys

A heat loss survey measures how much heat each room loses on a cold day. Everything else is sized from it.

What we do, step by step

If the system has to be off for part of the visit, we tell you before any work starts, so you can plan around it. In a business, work can often be done one area at a time. On site, it takes from a couple of days to around a week, depending on the system and how much of the heating changes. We agree a date with you and plan the visit to Fox Street so we arrive with what’s needed.

  1. It begins with your house and the heating it relies on now.
  2. Every room’s heat loss is worked out on site.
  3. We design the system, check the radiators and cylinder and look at the outdoor unit position.
  4. A fixed-price quote explains the cost, the grant position and the VAT.
  5. We install, commission and register the system under MCS.

How to prepare

  • Tell us about access, such as roof hatches, high walls or locked plant areas
  • Make sure we can reach the consumer unit or fuse board
  • Make sure we can reach the outdoor unit, or where it will go

Getting a price

Quotes do not take long. Call or email with a few details and we’ll come back to you the same working day. Where a survey is needed, we arrange a time that suits you.

Ask for a quote

Related advice

FAQs for Fox Street

Do I need planning permission for a heat pump in Fox Street?

It comes down to the building and the spot chosen for the outdoor unit. Around 6 listed entries sit within 0.5 miles of central Fox Street. A heat pump on a house can be permitted development if it meets the conditions, including the MCS noise check, but not within the grounds of a listed building, and in a conservation area the outdoor unit cannot face a road. Where necessary, we check with Tendring council, which is usually the planning authority for Fox Street.

Do you cover smaller places like Fox Street?

Yes. Fox Street is within the area we cover across London and the South East. Send a few details and photos, and we reply the same working day.

Will you make a mess?

Protection goes down first: dust sheets over floors and anything close to the work. Any drilling is agreed with you first, and we clear up the dust and offcuts before we leave.

Do I need new radiators for a heat pump?

The heat loss survey answers that, room by room. Rooms where the radiator is big enough stay as they are, and any that need upsizing are set out in the quote.

Will skipping a service affect the warranty?

It can, for some brands. Send us the make and model and we will tell you what the manufacturer expects, and book the service at the interval they recommend.

Can I get the Boiler Upgrade Scheme grant?

That depends on the scheme conditions, which we check for you. As the installer, we make the application where you qualify.

Does the grant cover air-to-air heat pumps?

Yes, but only where it becomes the home’s main heating. An air-to-air heat pump can get £2,500 if it replaces the fossil-fuel heating, meets the full heating demand, is fitted by an MCS certified installer and is in a home. Fitted alongside a boiler, it will not qualify.

What happens if it’s left?

The 0% VAT rate on heat pumps in homes runs until 31 March 2027, then 5% applies. If you’re thinking about a heat pump, that date is worth knowing alongside your own plans for the property. Getting the date in early helps for a place like Fox Street.

Every job is different, so each one gets its own fixed-price quote. The equipment, how we reach it, the route between units and the work needed all make a difference.

Why choose AirCon Doctor in Fox Street

  • Members of Checkatrade
  • Manufacturer’s warranty terms explained on your quote
  • MCS certified for heat pumps
  • We reply to enquiries the same working day

Read our cost guide or how to check a contractor.

How we price air source heat pumps

The survey or diagnosis tells us what the work involves. We look at:

  • The condition of any existing system
  • Whether the existing supply is suitable
  • How far the pipework has to run, and where

The price reflects the work, not guesswork. That’s why we look at the job first, from photos or on a survey, and why the quote is fixed before any work starts.

Asking for a quote

When you contact us, it’s useful to have:

  • Where the outdoor unit is, or where you’d like it
  • Any previous service or F-Gas records
  • The remote or wall controller showing any error

Here’s what helps us quote: the address and the type of property, a few photos, the brand and model of anything already fitted and any symptoms, from error codes to drips. Then call us on 07833 053749 or send an email.

Air source heat pumps in Fox Street: the local picture

The 2021 Census found about 74% of households in detached or semi-detached houses. Houses usually have space for an outdoor unit and a hot water cylinder.

If your home is listed, like Castle House about 3.2 miles north-east, listed building consent comes before any heat pump work. Older homes near Church of St John may need extra checks for planning and heat loss before a heat pump is designed.

Fox Street is about 3 miles north-east of Colchester, in Essex. If you need air source heat pumps in Fox Street, please give us a ring on 07833 053749 or fill in the contact form for a fixed-price quote. We work across London and the South East, including Fox Street. Our Essex coverage runs to 644 places, and Fox Street is one of them. The nearest of our city pages is London, around 53 miles from Fox Street.

Colchester Road, Crown Lane South and Fox Wood Chase and the roads off them are all inside our area. Postcode districts we cover here: CO7. We also cover Ardleigh (2 miles north-east), Ardleigh Heath (2 miles north-east), Langham (3 miles north), Lamb Corner (3 miles north-east) and Hornestreet (3 miles north). Larger places within reach include Colchester (3 miles south-west), Clacton-on-Sea (11 miles south-east), Harwich (13 miles east) and Camulodunum (4 miles south-west).

Local landmarks in Fox Street

In Fox Street, that means homes and buildings near Gilberd School and Welsh Wood and the streets around them. The nearest railway station is Hythe station, roughly 2.1 miles south-west. Other landmarks nearby include Lion Walk (2.7 miles south-west) and Colchester Castle (2.5 miles south-west). Not far away are Westhouse Wood.

Map of Fox Street © OpenStreetMap contributors

From one of our customers

“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”

James T., Crawley, office manager

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead