Essex · Heat pump installation
Air Source Heat Pumps in Finchingfield
MCS certified installation of air source heat pumps for heating and hot water, with the boiler upgrade scheme grant applied for, for Finchingfield and the surrounding area. Ask us for a fixed-price quote; we reply the same working day.
- Checking whether planning permission is needed
- Finding a place for the outdoor unit
- Replacing a combi boiler with a heat pump
About our air source heat pumps in Finchingfield
Air-to-air heat pumps can qualify for a £2,500 Boiler Upgrade Scheme grant, but only in some cases. It has to replace the fossil-fuel heating, cover the whole heating demand, be fitted by an MCS certified installer and be in a home; adding it alongside a boiler doesn’t qualify. We’re often asked to deal with wanting to stop using oil, LPG or gas for heating and questions about where the outdoor unit can go, on radiator systems, hot water cylinders and air-to-water heat pumps.
Homes around Finchingfield normally have room outside for a heat pump, so the design focuses on heat loss and radiators.
AirCon Doctor is an F-Gas certified company and NICEIC approved for electrical work, with MCS certification for heat pumps and Checkatrade membership. Refrigerant work is done by engineers who hold the F-gas qualifications the law requires.
- Place
- Finchingfield (CM7)
- Region
- Essex
- Credentials
- F-Gas certified company, NICEIC approved, MCS
- Prices
- Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
- Price
- A fixed-price quote up front
- Call
- 07833 053749
- Updated
- 30 October 2026
Homes in Finchingfield and heat pumps
About 88% of households live in detached or semi-detached houses, according to Census 2021 figures. Detached and semi-detached houses typically have room for the outdoor unit and a cylinder.
Live in one of the older houses around Parish Church of St John the Baptist? Expect the survey to look closely at heat loss and at the building’s planning status.
Finchingfield is about 8 miles north-west of Braintree, in Essex. Our engineers cover Finchingfield for air source heat pumps, along with the rest of Essex. Finchingfield is one of 644 places in Essex where we work for homes and businesses. London, roughly 40 miles off, has its own page on this site.
Jobs in CM7 are looked at, quoted and booked the same way as anywhere else. From The Pightle, Church Hill and Stephen Marshall Avenue to the smaller roads in between, the whole area is covered. Other places close to Finchingfield include Great Bardfield (1 mile south-west), Wethersfield (2 miles south-east), Little Bardfield (2 miles south-west), Bardfield Saling (3 miles south) and Crow's Green (4 miles south). Further out, we also cover Braintree (8 miles south-east), Witham (14 miles south-east), Saffron Walden (10 miles north-west) and Halstead (8 miles east).
Landmarks near Finchingfield
Locally, jobs take us to houses, flats and workplaces close to The Red Lion Inn. Open spaces near Finchingfield include West Wood.
Signs you need air source heat pumps in Finchingfield
Many enquiries start with a question about the Boiler Upgrade Scheme. Whether you can get the grant depends on your home and the scheme conditions, so we check before you commit.
What we are most often called about:
- Radiators that may be too small for a heat pump
- Questions about the Boiler Upgrade Scheme
- An oil, LPG or gas boiler near the end of its life
Sizing comes from the heat each room loses on a cold day, not from the size of the old boiler.
What your quote should include
- The make and model of any parts or equipment being quoted
- Exactly what the price includes, from supply and fitting to commissioning
- Whether they hold F-Gas company certification, not just individual qualifications
Your questions about air source heat pumps in Finchingfield
Does the Boiler Upgrade Scheme cover homes in Finchingfield?
Yes, if the home and the heat pump meet the scheme’s rules: Finchingfield is in England, where it applies. The grant is £7,500 for an air source (air-to-water) heat pump and £2,500 for an air-to-air system that replaces the existing fossil-fuel heating. You do not apply yourself: the MCS certified installer does, which is us.
Is a heat pump in Finchingfield permitted development?
It depends on the property. Central Finchingfield sits inside the Finchingfield Conservation Area. On a house, an air source heat pump can often go ahead under permitted development, with an outdoor unit of no more than 1.5 cubic metres and an installation that meets MCS 020(a), which includes a noise check. Those rights do not reach the grounds of a listed building, and conservation areas rule out walls or roofs facing a road. If that might affect you, we ask the local planning authority (for Finchingfield, usually Braintree council).
Do you work in Finchingfield?
Yes. Our area takes in London and the counties of the South East, and that includes Finchingfield.
Do you work on commercial properties?
Yes. From one rented home to commercial buildings, the approach is the same: survey or diagnosis, a fixed price and proper paperwork.
Do I need to service the system to keep the warranty?
It can, for some brands. Read the manufacturer’s terms, or send us the make and model and we’ll explain them and stick to the interval they set.
Do I get paperwork after the visit?
Yes, on every job. New installations come with commissioning details, F-Gas records and warranty information, and repairs and services get a record of the work.
Will you make a mess?
Protection goes down first: sheets over the floor and nearby furniture. Any drilling is agreed with you first, and we clear up the dust and offcuts before we leave.
Nearby places to Finchingfield
Also in Finchingfield
Before you call an engineer
For air conditioning, cleaning the indoor unit’s filters is the main job owners can do, if the manual says so. With the power off, they lift out, can be vacuumed or rinsed and must be fully dry before they go back. For a heat pump, the main owner jobs are a clear outdoor unit and sensible control settings.
Owner care supports servicing; it does not replace it. Clean filters and a clear outdoor unit help the system run as it should, but the refrigerant circuit, the electrics and the parts you can’t see still need an engineer at the interval the manufacturer recommends.
What affects the cost of air source heat pumps
The quote reflects the job in front of us. We take into account:
- What electrical work the job needs
- The pipe route between the units
- Whether it’s a simple split or a larger system
The cost depends on the system and the number of rooms or units, how easy the units are to reach and the parts and time the job needs. You get a fixed price before work begins, so you know where you stand.
Helping us quote
Photos and a few facts are often enough to price a simple job. Useful things to send:
- The remote or wall controller showing any error
- The outdoor side of the property, including any roof or flat area
- A photo of the consumer unit with the cover closed
Quoting starts with a diagnosis, from a site survey or, where the job is straightforward, from photos and measurements. After that, we send a fixed price before any work starts.
How the visit works
You do not need to do much on the day. Someone needs to let us in and show us the units, or where they’re going, and the rest is down to us. Before we leave, the area is tidied and we explain what we have done. Photos of the room and the outside of the property help us plan a visit to Finchingfield.
- We start with your plans and the property.
- A survey covers heat loss, radiators, hot water and where the outdoor unit could sit.
- We explain which type of heat pump suits the home and whether a grant could apply.
- We install the heat pump and connect it up.
- After commissioning, you get the MCS certificate and a handover.
Getting ready for the visit
- Tell us about parking and loading
- Mention any managing agent or landlord rules we need to follow
- Name a contact who can meet us at the agreed time
Getting a quote
Here’s what helps us quote: where the property is and what kind of building it is, a few photos, the make and model of any existing system and any symptoms, from error codes to drips. Once you have those, phone 07833 053749 or drop us a line.
Related advice
A customer’s words
“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”
David W., Haywards Heath