Hampshire · Heat pump installation
Air Source Heat Pumps in Eversley Cross
F-Gas certified and NICEIC approved, we cover Eversley Cross for MCS certified installation of air source heat pumps for heating and hot water, with the Boiler Upgrade Scheme grant applied for. A fixed price before any work starts, and a 24/7 emergency line.
- Checking eligibility for a heat pump grant
- Questions about where the outdoor unit can go
- Choosing between air-to-water and air-to-air
Air source heat pumps in Eversley Cross, done properly
Many air source heat pumps can be installed as permitted development in England, without a planning application. Conditions include a maximum outdoor unit size of 1.5 m³, compliance with MCS 020(a), use for more than cooling alone and a site outside the curtilage of a listed building. We check the rules for your property as part of the survey. The work covers underfloor heating, air-to-air heat pumps and hot water cylinders, and the jobs we see most are moving away from fossil-fuel heating and finding a place for the outdoor unit.
For a home around Eversley Cross that’s off mains gas and heated by oil or LPG, an extra £1,500 is available through the Boiler Upgrade Scheme until March 2027.
Refrigerant work is written up in the F-Gas records: what was done, the refrigerant type and any amount added or recovered. Keep the records with the manual and the warranty documents, as a manufacturer or a future engineer may ask to see them.
- Location
- Eversley Cross (RG27)
- Region
- Hampshire
- Accreditations
- F-Gas certified company, NICEIC approved, MCS
- Price
- Fixed-price quote after a site survey
- Typical price
- Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
- Telephone
- 07833 053749
- Reviewed
- 30 October 2026
Homes in Eversley Cross and heat pumps
The last census (2021) found about 71% of households in detached or semi-detached houses. Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these.
Live in one of the older houses around Church of St Mary? Expect the survey to look closely at heat loss and at the building’s planning status.
Eversley Cross is about 1 mile north-west of Yateley, in Hampshire. Eversley Cross gets the same approach as every job we take on: a look at the job first, a fixed-price quote and written records at the end. Our list for Hampshire has 683 entries, and Eversley Cross is one. We also work in Guildford, around 14 miles away.
Not far from Eversley Cross, a recent job of ours was on Princess Way, Camberley (GU15), about 6 miles east: installing a Samsung VRF system serving twelve rooms across two floors, including open-plan working areas, individual offices, a server room and a boardroom.
From Chequers Lane, Grensell Close and Chantreyland to the smaller roads in between, nowhere is left out. We work across the RG27 postcode area. Close to Eversley Cross, our area also takes in Eversley Centre (1 mile west), Finchampstead (1 mile north), Yateley (1 mile south-east), Eversley (1 mile north-west) and Lower Common (2 miles west). Within a short drive, we also cover Basingstoke (12 miles south-west), Farnborough (5 miles south-east), Fleet (5 miles south) and Aldershot (8 miles south-east).
Near you in Eversley Cross
Around Eversley Cross, our work takes us to homes and businesses near Chequers Inn and Yateley School and the streets around them. The closest station to Eversley Cross is Crowthorne station, roughly 2.3 miles north-east. Well-known places in the area include Pinewood Hospital (3.9 miles north-east). For a walk, there’s Wildmoor Heath and Horseshoe Lake.
Places near Eversley Cross
Also in Eversley Cross
When to call us in Eversley Cross
Some people want to move away from burning fossil fuels at home. A heat pump runs on electricity and takes heat from the outside air, which is why it fits that aim.
What we are most often called about:
- Plans to switch to electric heating with a heat pump
- Working out whether radiators need upsizing
- Questions about where the outdoor unit can go
Sizing comes from the heat each room loses on a cold day, not from the size of the old boiler.
What to look for in a quote
- Whether you get F-Gas records where refrigerant is involved
- Whether the company is F-Gas certified, and whether you can check it
- If the figure could change on the day
How the visit works
Our engineers bring the tools, gauges and access equipment the job needs. You only need to give us clear access to the units, or their planned positions, and to the fuse board. The visit takes several days for an air-to-water system with a new cylinder, less for an air-to-air system. We plan the trip to Eversley Cross around you.
- First we talk through the property and the current system.
- A heat loss survey is carried out, room by room.
- The design covers the heat pump, emitters, hot water and outdoor unit.
- A fixed-price quote explains the cost, the grant position and the VAT.
- Then it’s fitted, commissioned and registered with MCS.
Getting ready for the visit
- Let us know where the consumer unit is
- Let us know if the building has a permit or sign-in process
- Tell us about access, such as roof hatches, high walls or locked plant areas
Getting a price
Getting a quote is straightforward. Send a few details and photos, and we reply the same working day. Where a survey is needed, we arrange a time that suits you.
Advice
How the job changes from property to property
VAT on heat pumps
Installing an air source heat pump in a home is zero-rated until 31 March 2027, then 5%, under HMRC Notice 708/6. Businesses pay the standard rate.
Radiators and underfloor heating
Heat pumps run at lower flow temperatures, so radiators may need to be larger, and the survey checks each one.
What affects the quote in Eversley Cross
Typical ranges are on our prices page, and your quote is built on your job. What we look at:
- Which make and model is being fitted or worked on
- Whether we need access equipment for high-level work
- A single visit or a regular plan
The cost depends on the type of system and how many units are involved, how easy the units are to reach and the parts and time the job needs. You get a fixed price before work begins, so there are no surprises.
What we need to know
Simple jobs can often be priced from pictures and some basics. Useful things to send:
- A few pictures of the room and the wall the unit is on, or will go on
- The postcode and whether it’s a home, flat or business
- A close-up of the unit’s label showing the model number
Our prices page gives typical ranges, but your quote is based on your job, because no two buildings, rooms or systems are the same. Once we’ve looked at the job, from pictures or on a survey, you get a fixed price. To get going, ring us on 07833 053749 or fill in the contact form.
Eversley Cross questions
Can I get the Boiler Upgrade Scheme grant in Eversley Cross?
Eversley Cross is covered, as the scheme runs across England and Wales. The amount depends on the type of heat pump, and the survey confirms which applies. The installer applies, and we’re MCS certified.
Will a heat pump in Eversley Cross need planning permission?
The answer turns on the property and where the outdoor unit would sit. The centre of Eversley Cross is in a conservation area. A heat pump on a house can be permitted development if it meets the conditions, including the MCS noise check, but not within the grounds of a listed building, and in a conservation area the outdoor unit cannot face a road. Where necessary, we check with the local planning authority (for Eversley Cross, normally Hart council).
When will I hear back?
We reply to enquiries the same working day. If it’s an emergency, ring the 24/7 line instead.
Are my radiators big enough for a heat pump?
We find out during the survey. Rooms where the radiator is big enough stay as they are, and any that need upsizing are set out in the quote.
Do you cover Eversley Cross?
Yes. We work across Greater London, Surrey, Kent, East and West Sussex, Hampshire, the Isle of Wight, Berkshire, Buckinghamshire, Oxfordshire, Hertfordshire and Essex, Eversley Cross included.
Is the equipment covered by a warranty?
It’s the manufacturer’s, and the terms are theirs. Some terms depend on regular servicing by a qualified engineer so it’s worth keeping the service records.
What does an air-to-water heat pump cost?
Air-to-water installations cost £8,000–£16,000 (0% VAT on homes), before the grant. Air-to-air systems are priced after a survey, with the VAT confirmed on your quote.
From one of our customers
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager