Hertfordshire · Heat pump installation

Air Source Heat Pumps in Colney Street

F-Gas certified and NICEIC approved, we cover Colney Street for heat pump installation. A fixed price before work begins, and a 24/7 emergency line.

  • Working out where a cylinder could go
  • Checking emitters for a heat pump
  • Choosing between air-to-water and air-to-air

Air source heat pumps across Colney Street

Air source heat pumps in Colney Street, done properly

We begin with a room-by-room heat loss survey. It shows how much heat each room needs on a cold day, so the heat pump and the radiators or indoor units can be sized properly. Sizing by rule of thumb is not good enough. If the problem is checking whether planning permission is needed and working out where a cylinder could go, we can help.

Older and listed homes in villages like Colney Street need extra care, because permitted development does not apply within the grounds of a listed building, so consent comes first.

AirCon Doctor is an F-Gas certified company and NICEIC approved for electrical work, MCS certified for heat pumps and a Checkatrade member. Refrigerant work is done by engineers who hold the F-gas qualifications the law requires.

Where
Colney Street (AL2, WD7)
Wider area
Hertfordshire
Accreditations
F-Gas certified, NICEIC approved, MCS
Quote
Fixed after a survey or photos
Prices
Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
Phone
07833 053749
Page updated
30 October 2026

Landlords, agents and facilities managers

We regularly work with managing agents. Send the address, what’s needed and how access works, and we’ll send a fixed-price quote.

Where a tenant occupies the property but the landlord owns the system, the lease or tenancy agreement normally sets out who maintains what. We’re happy to deal with either side, and the paperwork can go to both.

When it’s something else

It’s worth knowing the limits before booking:

  • Improving the building’s insulation
  • Disconnecting or servicing a gas boiler
  • Formal advice on VAT for your situation

If in doubt, ring 07833 053749, or email if that’s easier and we will say what we think.

What the work covers

  • Air-to-water heat pumps
  • Radiator systems
  • Hot water cylinders
  • Air-to-air heat pumps
  • Underfloor heating
  • Homes heated by oil, LPG or gas

How the visit works

Each visit runs to the same pattern: check the plan with you, put the dust sheets down, do the work, check the system and explain it all to you. On site, the work takes a few days for most air-to-water installations, with air-to-air systems often quicker. Rural lanes and tight entrances are worth mentioning before a visit to Colney Street.

  1. It begins with your house and the heating it relies on now.
  2. Every room’s heat loss is worked out on site.
  3. The design covers the heat pump, emitters, hot water and outdoor unit.
  4. Cost, grant and VAT appear on one fixed-price quote.
  5. Then it’s fitted, commissioned and registered with MCS.

Before we arrive

  • Mention any parking restrictions near the property
  • Let us know if the units are on a roof, a high wall or in a locked area
  • Find the manual or the paperwork for the system, if you have it

How to get a quote

Our prices page gives typical ranges, but your quote is based on your job, because no two buildings, rooms or systems are the same. Once we have looked at the job, from pictures or on a survey, you get a fixed price. To start, call us on 07833 053749 or write to us at info@aircondoctor.co.uk.

Get a quick quote

Advice

Heat pumps in Colney Street: local notes

About 40% of homes in the Colney Street area date from 1945 to 1972, according to the Valuation Office Agency’s council tax figures, and about 62% of households live in detached or semi-detached houses, according to the last census (2021). Whether the walls and loft have been insulated makes a real difference to the heat pump size for homes of that period. Detached and semi-detached houses usually have room for the outdoor unit and a cylinder.

Older homes near Church of the Holy Trinity may need extra checks for planning and heat loss before a heat pump is designed. High Elms Manor lies about 2.9 miles west. Owners of listed homes need consent before a heat pump is fitted, so it’s one of our first questions.

Colney Street is about 3 miles south of St Albans, in Hertfordshire. Whatever kind of property you have in Colney Street, we can help with air source heat pumps. You will hear back from us the same working day and our emergency line runs 24/7. Our Hertfordshire coverage runs to 381 places, and Colney Street is one of them. The nearest of our city pages is London, around 18 miles from Colney Street.

You will find streets such as Old Parkbury Lane, Ventura Park and Radlett Road, all of which are in our area. Our working area takes in AL2 and WD7 in full. Close by, we work in Frogmore (1 mile north-west), Park Street (1 mile north-west), How Wood (1 mile north-west), Bricket Wood (2 miles west) and Chiswell Green (2 miles north-west). Further out, we also cover Watford (4 miles south-west), Hemel Hempstead (6 miles north-west), Stevenage (15 miles north-east) and St Albans (3 miles north).

Near you in Colney Street

Typical jobs here are in properties near The George and Dragon Public House and Samuel Ryder Academy, among other places. For rail, the closest station is How Wood station, roughly 1 mile north-west. Nearby you will also find Kingsley Green (1 mile east) and The Maltings (2.9 miles north). The countryside around Colney Street includes Verulamium Lake and Broad Colney Lakes.

Map of Colney Street © OpenStreetMap contributors

What affects the quote in Colney Street

Every job gets its own quote. These are the things that affect it:

  • What state the existing equipment is in
  • A single visit or a regular plan
  • Whether we need access equipment for high-level work

Putting the work off seldom saves money. Faults and wear in a system tend to grow, and a struggling system uses more electricity to do less. If you’re unsure, phone 07833 053749 or write to us at info@aircondoctor.co.uk for straight advice and a fixed price.

Asking for a quote

The more you tell us, the more accurate the quote. When you get in touch, it helps to send:

  • A short video of any fault, such as a noise or a flashing light
  • The paperwork from the last service, if you have it
  • The outdoor side of the property, including any roof or flat area

Every quote shows the VAT clearly, with the rate that applies to your job. VAT can differ between homes and businesses and between kinds of work, so we confirm it on the quote. To get one, ring us on 07833 053749 or drop us a line.

Questions from Colney Street

Is planning permission needed for a heat pump in Colney Street?

The answer turns on the property and where the outdoor unit would sit. Around 6 listed entries sit within 0.5 miles of central Colney Street. On a house, an air source heat pump can often go ahead under permitted development, with an outdoor unit of no more than 1.5 cubic metres and an installation that meets MCS 020(a), which includes a noise check. Those rights don’t reach the grounds of a listed building, and conservation areas rule out walls or roofs facing a road. If that might affect you, we ask St Albans City council, which is usually the planning authority for Colney Street.

Is Colney Street within the area you cover?

Yes, smaller places are covered as well as towns. Send a few details and photos, and we reply the same working day.

Does the grant cover air-to-air heat pumps?

Sometimes, and the amount is £2,500 rather than £7,500. It must replace fossil-fuel heating and meet the full heating demand of a home, installed by an MCS certified installer.

How do you keep the place clean during the work?

We start with protection: dust sheets over floors and anything close to the work. Any drilling is agreed with you first, and we clear up the dust and offcuts before we leave.

What does an air-to-water heat pump cost?

For air-to-water, it’s £8,000–£16,000 (0% VAT on homes) before any Boiler Upgrade Scheme grant. Air-to-air systems are priced after a survey, with the VAT confirmed on your quote.

Do you work on commercial properties?

Yes. Homeowners, landlords, agents and businesses all book us across London and the South East. Let us know who the records should go to.

How soon will you get back to me?

The same working day. After that, we agree a survey, diagnosis or installation date that suits you, with a fixed price before work starts.

From one of our customers

“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”

David W., Haywards Heath

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead