Hertfordshire · Heat pump installation
Heat pump installation in Bricket Wood, Hertfordshire
Heat pump installation, for Bricket Wood and the surrounding area. Call for a fixed-price quote, and we will reply the same working day.
- Checking whether planning permission is needed
- Ageing boilers that will need replacing
- Comparing heat pump types
What the work involves, system by system
Outdoor unit position and planning
Permitted development conditions in England include an outdoor unit of no more than 1.5 m³, compliance with MCS 020(a), and use for more than cooling alone. Listed building curtilages are excluded.
Heat loss surveys
The survey covers the building fabric and how air moves through it, and the size of each room.
Air source heat pumps in Bricket Wood, done properly
Many air source heat pumps can be installed as permitted development in England, without a planning application. The conditions include an outdoor unit of no more than 1.5 m³ and compliance with MCS 020(a), and the unit cannot be used solely for cooling or sit within the curtilage of a listed building. We look at the planning position for your home during the survey. The work covers homes heated by oil, LPG or gas, air-to-air heat pumps and hot water cylinders, and people most often call us about questions about listed buildings or conservation areas and questions about the Boiler Upgrade Scheme.
Cottages and older homes near Bricket Wood can lose heat faster, so a proper heat loss calculation matters. Sometimes insulating first makes more sense.
Some warranty terms depend on the system being serviced regularly by a qualified engineer. If that applies to your system, booking the service on time keeps the record straight, and every service is written up.
- Where
- Bricket Wood (AL2)
- Region
- Hertfordshire
- Pricing
- A fixed price before any work starts
- Approvals
- F-Gas certified company, NICEIC approved, MCS
- Price guide
- Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
- Replies
- On the working day you ask
- Telephone
- 07833 053749
- Checked
- 30 October 2026
Air source heat pumps in Bricket Wood: the local picture
Census 2021 figures found about 78% of households in detached or semi-detached houses. Houses typically have space for an outdoor unit and a hot water cylinder. Bricket Wood is about 19 miles from central London, well within the area we cover from our base in East Grinstead.
Homeowners near Bricket Wood station often ask whether a heat pump can take over from the boiler, and the heat loss survey answers that. High Elms Manor lies about 1.1 miles west. Owners of listed homes need consent before a heat pump is fitted, so it’s one of our first questions.
Bricket Wood is about 3 miles north-east of Watford, in Hertfordshire. Whether you’re in the middle of Bricket Wood or further out, we cover air source heat pumps, from a single room to a whole building. Bricket Wood is one of 381 places in Hertfordshire where we work. London is in our area too, about 19 miles from Bricket Wood.
Station Road, Brackendene and Moss Side and the roads off them are all inside our area. Being close to the A405, Bricket Wood is simple for us to get to. We also cover the places around Bricket Wood: Waterdale (1 mile west), How Wood (1 mile north-east), Chiswell Green (1 mile north), Frogmore (2 miles north-east) and Park Street (2 miles north-east). Within a short drive, we also cover Watford (3 miles south-west), Hemel Hempstead (5 miles north-west), St Albans (4 miles north-east) and Welwyn Garden City (10 miles north-east).
What’s near Bricket Wood
Typical jobs here are in properties near Garston Park, The Black Boy Public House and Saint Michael's Catholic High School, among other places. For rail, the closest station is Bricket Wood station, roughly 0.5 miles east of the centre. Well-known places in the area include Radlett and District Museum (3 miles south-east) and Hilfield Castle (4 miles south). The countryside around Bricket Wood includes Longspring Wood and Verulamium Lake.
Your questions about air source heat pumps in Bricket Wood
Is Bricket Wood within the area you cover?
We do. Villages and hamlets get the same service as the bigger towns. We’re based in East Grinstead and plan each visit so the job can be finished in one trip where possible.
Is the heat pump grant available in Bricket Wood?
Yes, the scheme covers homes in England, including Bricket Wood, if they qualify. For an air-to-water heat pump the amount is £7,500; an air-to-air system can get £2,500 if it replaces the fossil-fuel heating outright, meets the home’s full heating demand and isn’t an add-on to a boiler. You do not apply yourself: the MCS certified installer does, which is us.
Do I get paperwork after the visit?
Yes, on every job. New installations come with commissioning details, F-Gas records and warranty information, and repairs and services get a record of the work.
Do you look at the job first?
Yes, always. Diagnosis comes before treatment: the survey shows what’s needed, where things go and what access we need, and the quote is based on that.
How long does a heat pump installation take?
It takes a few days for most air-to-water installations, with air-to-air systems often quicker. The cylinder, the radiators and the pipework make the biggest difference and the timing is set out with your quote.
How do you keep the place clean during the work?
We put dust sheets over floors and furniture near the work first, and we tidy up as we go. Before we leave, we clear up and run through the work with you.
Do you work for landlords and businesses?
Yes. We work for homeowners, landlords, letting and managing agents, and businesses of every size in Bricket Wood and across Hertfordshire. Let us know who the records should go to.
What affects the cost of air source heat pumps
Every job gets its own quote. These are the things that affect it:
- How many units are involved
- The electrical supply and whether a new circuit is needed
- The type of system, from a single split to a larger system
Putting several jobs into one visit often makes better use of the time. Mention every unit or room you need covered, and you’ll get one fixed price.
Before you get in touch
What to send for a quote:
- The fuse board and where it is in the property
- The outside wall, roof or yard where the outdoor unit sits or would go
- The rating plate or label on any existing unit
Every quote starts with a look at the job, either on a site survey or, for simple jobs, from your photos and details. Then you get a fixed price so you know the cost before we begin.
When it’s something else
Some problems need a different service or another trade:
- Insulation work, such as loft or cavity wall insulation
- Tax advice on your own circumstances
- Any gas work on the existing boiler
If in doubt, call 07833 053749 or email us and we will say what we think before you book.
What the work covers
- Radiator systems
- Underfloor heating
- Air-to-air heat pumps
- Air-to-water heat pumps
- Homes heated by oil, LPG or gas
- Hot water cylinders
Towns and villages near Bricket Wood
Other services in Bricket Wood
The process
There’s very little for you to do on the day. Someone needs to let us in and show us the units, or where they’re going, and the rest is down to us. Before we leave, the area is tidied and we explain what we have done. Around Bricket Wood, access is normally simple, though gates and garden access are worth mentioning.
- It begins with your house and the heating it relies on now.
- A heat loss survey is carried out, room by room.
- We design the system, check the radiators and cylinder and look at the outdoor unit position.
- You get a fixed price, with any grant and the VAT set out.
- We install, commission and register the system under MCS.
Before we arrive
- Plan for pets to be kept clear during the visit
- Make sure we can reach the consumer unit or fuse board
- Let us know if the units are on a roof, a high wall or in a locked area
Getting a price
Here’s what helps us quote: the address and the type of property, pictures of the rooms or units, the make and model of any existing system and any symptoms, from error codes to drips. Then ring 07833 053749.
Related advice
From one of our customers
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager