Kent · Heat pump installation

Heat pump installers in Clement Street

Expert air source heat pumps for Clement Street: a survey or diagnosis, a fixed price, careful work and proper paperwork. Ask us for a fixed-price quote.

  • Wanting to stop using oil, LPG or gas for heating
  • Ageing boilers that will need replacing
  • Not knowing whether a grant applies

Air source heat pumps near Clement Street

Landlords, agents and facilities managers

Managing agents often deal with us directly. Tell us the property, the work and the access arrangements, and we will send a fixed-price quote.

From a single flat to a whole estate, you get the same standard: diagnosis, a fixed price, access agreed with the people on site and paperwork at the end.

Air source heat pumps in Clement Street

A £2,500 grant is available for some air-to-air heat pumps, with conditions. It has to replace the fossil-fuel heating, cover the whole heating demand, be fitted by an MCS certified installer and be in a home, so an add-on next to a boiler is not eligible. If the problem is planning and permitted development questions and plans to switch to electric heating with a heat pump, we can help.

Older and listed homes in villages like Clement Street need extra care, and permitted development does not cover listed buildings, so we check consent first.

Nothing is signed off by word of mouth: commissioning details and F-Gas records for a new system, a note of the fault and the fix for a repair, or a service record. Keep it with the system’s paperwork so it’s to hand next time.

Where
Clement Street (BR8)
Region
Kent
Guide price
Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
Pricing
Fixed-price quote after a site survey
Accreditations
NICEIC approved, F-Gas certified, MCS
Call
07833 053749
Reviewed
30 October 2026

What affects the cost of air source heat pumps

Jobs vary more than people expect. The main factors:

  • The type of system, from a single split to a larger system
  • Whether the existing supply is suitable
  • A single visit or a regular plan

Homes, offices, shops and public buildings are all priced the same way: the equipment, the access, the work involved and the time it takes. Ask for a fixed-price quote and we will go through it with you.

Helping us quote

Simple jobs can often be priced from photos and some basics. Useful things to send:

  • Your consumer unit or fuse board
  • A short video of any fault, such as a noise or a flashing light
  • A close-up of the unit’s label showing the model number

Need a price for air source heat pumps? Please ring us on 07833 053749 or write to us at info@aircondoctor.co.uk and tell us about the job. We will explain what we’d recommend and why, then send a fixed-price quote before anything is booked.

How the visit works

The first job on site is protection: sheets over the floor and any furniture nearby, and we ask before moving anything. After that, anything electrical is made safe and we start. It takes from a couple of days to around a week, depending on the system and how much of the heating changes, and we clear up before we go. We plan the trip to Clement Street around you.

  1. You tell us about the home and what you want from a heat pump.
  2. A survey covers heat loss, radiators, hot water and where the outdoor unit could sit.
  3. We explain which type of heat pump suits the home and whether a grant could apply.
  4. The system is installed and connected to the controls.
  5. The job ends with commissioning, the MCS certificate and a walk through the controls.

Getting ready for the visit

  • Tell us about any building rules, permits or sign-in
  • Mention any roof access, ladders or high-level work
  • Mention any parking restrictions near the property

Get a fixed-price quote

VAT is set out clearly on every quote, and the rate that applies to your job is stated. VAT can differ between homes and businesses and between kinds of work, so we confirm it in writing rather than guess. To get one, phone us on 07833 053749 or drop us a line.

Get a quick quote

Read more

Owner checks or an engineer?

There are a few things you can safely do yourself: keep the outdoor unit clear of leaves, plants and clutter, check the settings and the remote, and follow the cleaning the manual describes. Anything inside the units, the electrics and the refrigerant is engineer’s work.

Write down what you notice: an error code, a new noise, a drip, a smell or a change in how well the system heats or cools. It helps us diagnose quickly, and a photo of the display helps even more.

What a heat pump looks like in Clement Street

Clement Street is about 14 miles from central London, well within the area we cover from our base in East Grinstead. About 44% of homes in the Clement Street area date from 1945 to 1972, according to Valuation Office Agency council tax records, and about 74% of households live in detached or semi-detached houses, according to Census 2021 figures. For homes of that age, the survey checks the insulation, the radiators and the hot water setup. Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these.

If your home is one of the older properties near Church of Saint Paul, the survey checks whether it’s listed or in a conservation area before the outdoor unit position is chosen. With Hall Place and Gardens about 3.3 miles north-west, it’s worth asking whether your own home is listed before planning a heat pump.

Clement Street is about 2 miles south of Dartford, in Kent. Clement Street gets the same approach as every job we take on: a look at the job first, a fixed-price quote and written records at the end. Count every place we list in Kent and you reach 922, with Clement Street on the list. Bromley, roughly 9 miles off, has its own page on this site.

Our nearest recent job to Clement Street was on Station Road, Orpington (BR6), about 5 miles south-west: installing three Daikin cassette units in the main office area and a wall-mounted unit in the client meeting room.

Our working area takes in BR8. Close to Clement Street, our area also takes in Hawley (1 mile north-east), Sutton at Hone (1 mile east), South Darenth (2 miles south-east), Darenth (2 miles east) and St Margarets (2 miles east). Larger places within reach include Sevenoaks (9 miles south), Gravesend (7 miles east), Tonbridge (15 miles south) and Northfleet (6 miles east).

Landmarks near Clement Street

Locally, jobs take us to houses, flats and workplaces close to Dartford Heath, Wilmington Academy and The Plough pub. The nearest railway station is Farningham Road station, roughly 1.3 miles south-east. A little further out are Eynsford Castle (3 miles south) and West Hill Hospital (2.2 miles north). Open spaces near Clement Street include Wansunt Pit.

Map of Clement Street © OpenStreetMap contributors

Clement Street: your questions answered

Is Clement Street within the area you cover?

Yes. Clement Street is within the area we cover across London and the South East. Send a few details and photos, and we reply the same working day.

Can you do air source heat pumps in Clement Street?

Yes, Clement Street is within the area we cover. To start, give us a ring on 07833 053749 or drop us a line with a few pictures.

When will I hear back?

You will hear from us the same working day. For a breakdown that can’t wait, call our 24/7 emergency line.

Can I do the refrigerant work myself?

No, not the refrigerant side. Under the F-gas rules, it must be done by qualified engineers from a certified company, and a new electrical circuit is notifiable building work unless a registered competent person does it.

Do you work for landlords and businesses?

Yes. From one rented home to commercial buildings, we work the same way: a look first, a fixed-price quote and written records.

Do I need to service the system to keep the warranty?

Each manufacturer decides. If servicing is in the terms, missing one could affect a claim, so we explain the terms on your quote.

Is there a Boiler Upgrade Scheme grant for air-to-air?

The scheme offers £2,500 for air-to-air, but the conditions are strict. It will not apply if the system is an add-on next to a boiler as it has to meet the full heating demand.

From one of our customers

“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”

James T., Crawley, office manager

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead