Kent · Heat pump installation

Air Source Heat Pumps in Clapper Hill

F-Gas certified and NICEIC approved, we cover Clapper Hill for air source heat pumps. A fixed price before work begins, and a 24/7 emergency line.

  • Checking emitters for a heat pump
  • Questions about listed buildings or conservation areas
  • Finding a place for the outdoor unit

Air source heat pumps for Clapper Hill

Heat pumps in Clapper Hill: local notes

About 75% of households live in detached or semi-detached houses, according to Census 2021 figures. Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these. Central Clapper Hill is inside a conservation area. There are 2 conservation areas within a mile of the centre of Clapper Hill. Listed buildings are part of the picture here: about 5 within half a mile of the centre, such as Birchley East Birchley Farmhouse Birchley West (grade II*). Where a home is affected, the outdoor unit position is settled with the local planning authority (typically Ashford council) before the heat pump design is finished.

Sizing comes from the heat each room loses on a cold day, not from the size of the old boiler.

Clapper Hill is about 10 miles west of Ashford, in Kent. Across the TN27 area, we can help with air source heat pumps. Across Kent, we cover 922 places, Clapper Hill among them. The nearest of our city pages is Eastbourne, around 26 miles from Clapper Hill.

The closest recent job we can point to from Clapper Hill was on Mermaid Street, Rye (TN31), about 11 miles south: installing three Fujitsu wall-mounted units in guest bedrooms, with the outdoor units positioned in the hotel’s walled rear garden.

Postcode districts we cover here: TN27. We also cover the places around Clapper Hill: Fosten Green (1 mile west), East End (1 mile south-west), Parkgate (1 mile south-east), London Beach (2 miles east) and Strood (3 miles south). Further out, we also cover Maidstone (13 miles north), Ashford (10 miles east), Foley Park (14 miles north) and Paddock Wood (12 miles north-west).

Landmarks near Clapper Hill

Typical jobs here are in properties near Wattle Wood and the streets around them. Clapper Hill’s nearest station is Headcorn station, about 4.8 miles north of the centre. Other landmarks nearby include Mervyn Quinlan Museum (1.2 miles south-west) and Sissinghurst Castle (2.8 miles north-west).

Map of Clapper Hill © OpenStreetMap contributors

Air source heat pumps in Clapper Hill, done properly

We install air source heat pumps in Clapper Hill and across Kent, and we’re MCS certified. There are two kinds: air-to-water, which heats radiators or underfloor heating and your hot water, and air-to-air, which warms rooms through indoor units and can also cool. We’ll explain which type fits your home and why. The work covers homes heated by oil, LPG or gas, radiator systems and air-to-air heat pumps, and people most often call us about questions about where the outdoor unit can go and planning and permitted development questions.

Older and listed homes in villages like Clapper Hill need extra care, because permitted development doesn’t apply within the grounds of a listed building, so we check consent first.

The records are your system’s health record: a dated account of the work and the readings we took. It makes the next visit quicker and any warranty question simpler and it’s worth keeping safe.

Location
Clapper Hill (TN27)
Region
Kent
Quote
A fixed-price quote up front
Credentials
NICEIC and F-Gas, MCS
Prices
£8,000–£16,000 before the grant, 0% VAT on homes
Call
07833 053749
Reviewed
30 October 2026

Clapper Hill: your questions answered

Does the Boiler Upgrade Scheme cover homes in Clapper Hill?

Yes, the scheme covers homes in England, including Clapper Hill, if they qualify. The grant is £7,500 for an air source (air-to-water) heat pump and £2,500 for an air-to-air system that replaces the existing fossil-fuel heating. We hold MCS certification, so the application is ours to make for you.

Is Clapper Hill within the area you cover?

Yes, smaller places are covered as well as towns. A few pictures and the postcode are enough to get things started.

How long will it take to install a heat pump?

It takes several days for an air-to-water system with a new cylinder, less for an air-to-air system. How much of the heating changes decides most of the time, and we confirm the timing with your quote.

Is there a survey before the work?

Yes, every time. We diagnose before we treat: the survey shows what’s needed, where things go and what access we need and the fixed price is built on it.

Can you set up regular servicing?

Yes. We offer maintenance contracts, set at the interval the system and the manufacturer’s terms need. Each visit is recorded and F-Gas records kept where they apply.

Can you look at a system you didn’t fit?

Yes. Systems fitted by other companies are fine, on all the main brands. Send us the make and model, and any records you have.

How soon will you get back to me?

The same working day. Then we agree a date that works for you, with a fixed price before work starts.

When to call us in Clapper Hill

Homes with electric heating sometimes look at heat pumps as an alternative. The survey tells you whether it’s practical and what’s involved, and we explain the grant position for your home.

The things we are asked about most include:

  • Moving away from fossil-fuel heating
  • Questions about listed buildings or conservation areas
  • Comparing heat pump types

With Smallhythe Place about 4.8 miles south-east, it’s worth asking whether your own home is listed before planning a heat pump.

What to look for in a quote

  • Who does the electrical work, and whether they can certify it
  • Whether you get F-Gas records where refrigerant is involved
  • Whether the manufacturer’s warranty depends on regular servicing

Our hiring checklist

Different systems, different jobs

Outdoor unit position and planning

Permitted development conditions in England include an outdoor unit of no more than 1.5 m³, compliance with MCS 020(a), and use for more than cooling alone. Listed building curtilages are excluded.

The Boiler Upgrade Scheme

Only one grant is available per property, and it can’t replace a low-carbon system. Hybrids are excluded.

What air source heat pumps cannot fix

Some problems need a different service or another trade:

  • Getting planning permission or listed building consent on your behalf
  • Any gas work on the existing boiler
  • Tax rulings, which only HMRC can give

Not sure which it is? You can ring us on 07833 053749 or email us and we will tell you honestly.

Parts of the system we cover

  • Air-to-water heat pumps
  • Homes heated by oil, LPG or gas
  • Underfloor heating
  • Hot water cylinders
  • Air-to-air heat pumps
  • Radiator systems

How it works

Each visit follows the same order: agree the plan on site, protect the area, do the work, check the system and explain it all to you. The visit itself takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. Pictures of the space and where the outdoor unit could go let us plan the work in Clapper Hill.

  1. It begins with your house and the heating it relies on now.
  2. A heat loss survey is carried out, room by room.
  3. From those figures we size the heat pump and decide on radiators, cylinder and outdoor position.
  4. Cost, grant and VAT appear on one fixed-price quote.
  5. Then it’s fitted, commissioned and registered with MCS.

Preparing for the visit

  • Mention any parking restrictions near the property
  • Have the make and model of any existing unit to hand
  • Let us know if the units are on a roof, a high wall or in a locked area

How to get a quote

VAT is set out clearly on every quote, and the rate that applies to your job is stated. VAT can differ between homes and businesses and between kinds of work, so we confirm it in writing rather than guess. For a fixed-price quote, phone 07833 053749, or email if that’s easier.

Get a price

Read more

From one of our customers

“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”

Sarah M., East Grinstead

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead