Kent · Heat pump installation
Burlings air source heat pumps
MCS certified installation of air source heat pumps for heating and hot water, with the boiler upgrade scheme grant applied for, for Burlings and the surrounding area. Ask us for a fixed-price quote, and we will reply the same working day.
- Questions about listed buildings or conservation areas
- Questions about the Boiler Upgrade Scheme
- Questions about where the outdoor unit can go
Air source heat pumps in Burlings, done properly
Hot water from an air-to-water system is stored in a cylinder. Homes with a combi boiler may not have a cylinder, so finding space for one is part of the survey. With air-to-air, hot water has to come from something else. If the problem is deciding on the outdoor unit position and working out where a cylinder could go, we can sort it out.
Space for an outdoor unit is rarely an issue near Burlings, so the design focuses on heat loss and radiators.
Each manufacturer sets its own warranty period. For example, Daikin’s standard warranty on split air conditioning is 2 years, and its longer extensions apply to its air-to-water units only. For any other brand, we explain the manufacturer’s terms on your quote.
- Place
- Burlings (TN14)
- Region
- Kent
- Price guide
- £8,000–£16,000 before the grant, 0% VAT on homes
- Quote
- A fixed price before any work starts
- Certified
- F-Gas certified, NICEIC approved, MCS
- Call
- 07833 053749
- Checked
- 30 October 2026
Air source heat pumps around Burlings
The 2021 Census found about 75% of households in detached or semi-detached houses. Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these.
Period properties close to St Katharine's Church can suit a heat pump, though insulation and any heritage protection are checked first.
Burlings is about 5 miles north-west of Sevenoaks, in Kent. Whatever kind of property you have in Burlings, our engineers can help with air source heat pumps. You will hear back from us the same working day, and there’s a 24/7 emergency line. We cover 922 places across Kent. Our Bromley page covers places nearby, about 7 miles away.
Our nearest recent job to Burlings was on Station Road, Orpington (BR6), about 5 miles north: installing three Daikin cassette units in the main office area and a wall-mounted unit in the client meeting room.
Work in TN14 follows the same survey, fixed-price quote and written records as everywhere else we cover. Close to Burlings, our area also takes in Horns Green (1 mile south-west), Cudham (1 mile north-west), Berry's Green (1 mile west), Single Street (1 mile north-west) and Luxted (2 miles north-west). Larger places within reach include Dartford (11 miles north-east), Sevenoaks (5 miles south-east), Royal Tunbridge Wells (14 miles south-east) and Gravesend (15 miles north-east).
Near you in Burlings
Around Burlings, our work takes us to homes and businesses near The Blacksmith's Arms and the streets around them. The closest station to Burlings is Knockholt station, roughly 3 miles north-east of the centre. Other landmarks nearby include Orpington Hospital (3.6 miles north). Not far away are Downe Bank and Betsom's Hill.
Also near Burlings
Also in Burlings
What happens if it’s left?
Permitted development rules can change, and conditions vary between properties. We look at the planning position early, so there are no surprises covering listed buildings, conservation areas and any Article 4 direction. A system that is left with a fault, or without a service, usually costs more to run.
Homes, offices, shops and public buildings are all priced the same way: what’s needed, how we reach it, the parts and the labour. Call for a fixed-price quote and we will go through it with you.
Why choose AirCon Doctor in Burlings
- A fixed price before any work starts
- F-Gas certified company
- MCS certified for heat pumps
- Members of Checkatrade
Common problems we fix in Burlings
Homes with electric heating sometimes look at heat pumps as an alternative. A survey shows whether a heat pump suits the property and what would need to change along with whether any grant could apply.
Most people get in touch after spotting something like this:
- Deciding which kind of heat pump suits the home
- An oil, LPG or gas boiler near the end of its life
- Planning and permitted development questions
Historic houses such as Down House, about 2.2 miles north-west, are a reminder that listed homes need consent before a heat pump goes in.
Comparing quotes
- How VAT is shown, and which rate applies
- Why the equipment they’re quoting suits the job
- What the manufacturer’s warranty covers and for how long
Questions from Burlings
Is a heat pump in Burlings permitted development?
The answer turns on the property and where the outdoor unit would sit. The centre of Burlings is in a conservation area. A heat pump on a house can be permitted development if it meets the conditions, including the MCS noise check, but not within the grounds of a listed building, and in a conservation area the outdoor unit can’t face a road. Where needed, we check with the local planning authority (for Burlings, normally Sevenoaks council).
Is the heat pump grant available in Burlings?
Burlings is covered, as the scheme runs across England and Wales. Air-to-water and ground source systems attract £7,500. Air-to-air gets £2,500, but only where it takes over from fossil-fuel heating and covers the whole home’s heating demand. The installer applies, and we are MCS certified.
Which type of heat pump is right for my home?
Air-to-water replaces the boiler for heating and hot water, while air-to-air heats and cools rooms. The survey helps decide. We install both types.
How much time does a heat pump install need?
An installation takes from a couple of days to around a week, depending on the system and how much of the heating changes. We confirm the timing after the survey, so ring 07833 053749 or drop us a line to arrange one.
Are you F-Gas certified?
AirCon Doctor is an F-Gas certified company, with NICEIC approval for electrical work and MCS certification for heat pumps. We’re members of Checkatrade too.
Can landlords and managing agents book you?
Yes. Homeowners, landlords, agents and businesses all book us in Burlings and across Kent. Tell us who should receive the paperwork.
How much does an air source heat pump cost?
Air-to-water systems are £8,000–£16,000 (0% VAT on homes), before any grant. Your price depends on the survey, the emitters and the hot water and the quote is fixed.
Keeping the system healthy
Once we’ve finished, these simple steps help:
- Read the manufacturer’s warranty terms for your brand
- Ask about the grant before you commit
- Keep the outdoor unit clear all year
Once commissioned, we register the installation with MCS and give you the certificate. Keep it with the manufacturer’s paperwork, as you may need it later.
Don’t cover radiators with furniture or heavy curtains so the heat can get into the room.
What we do, step by step
The visit goes in the diary at a time that works for you, and we keep you posted if anything changes. When we arrive, we check the job against the survey or the pictures you sent. If something is different, we talk it through with you before carrying on. After that, it takes several days for an air-to-water system with a new cylinder, less for an air-to-air system. For a village like Burlings, tell us about narrow lanes, gates and parking when you book.
- First we find out about the property, the heating you have now and what you’re hoping for.
- On the visit we calculate what every room loses on a cold day, then check the radiators, room for a cylinder and outdoor unit options.
- The price comes back fixed and in writing, with the grant and VAT shown line by line.
- We fit the outdoor unit and connect it to the heating, hot water and controls.
- The system is commissioned and registered under MCS, and we show you how to use it.
Getting ready for the visit
- Move furniture away from the wall where we’ll be working
- Tell us about access, such as roof hatches, high walls or locked plant areas
- Dig out any previous service or F-Gas records
Ask for a quote
For air source heat pumps in Burlings, ring 07833 053749 or fill in the contact form. Tell us what kind of property it is and what you’d like done, and send a few photos if you can. We reply the same working day.
Related advice
From one of our customers
“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”
David W., Haywards Heath