Hampshire · Heat pump installation
Air Source Heat Pumps in Bridgemary
Air source heat pumps for Bridgemary and the surrounding area: diagnosis first, then a fixed-price quote, the work and written records. Ask us for a fixed-price quote.
- Questions about the Boiler Upgrade Scheme
- Moving away from fossil-fuel heating
- Finding a place for the outdoor unit
Air source heat pumps in Bridgemary, done properly
As an MCS certified installer, we fit air source heat pumps for homes in Bridgemary and the rest of Hampshire. There are two kinds: air-to-water, which heats radiators or underfloor heating and your hot water, and air-to-air, which warms rooms through indoor units and can also cool. We help you work out which suits your home. The work covers underfloor heating, air-to-water heat pumps and air-to-air heat pumps, and people most often call us about an oil, LPG or gas boiler near the end of its life and planning and permitted development questions.
For a house near Bridgemary, space outside is rarely the problem, so heat loss, radiators and the electrics are what we check.
Equipment warranty comes from the manufacturer, on its own terms, and we explain those terms on your quote. Terms differ from brand to brand, and we’re happy to talk you through them.
- Location
- Bridgemary (PO13, PO12)
- Wider area
- Hampshire
- Response
- Same working day
- Credentials
- NICEIC approved, F-Gas certified, MCS
- Price
- Fixed, in writing
- Price guide
- £8,000–£16,000 before the grant, 0% VAT on homes
- Telephone
- 07833 053749
- Last updated
- 30 October 2026
Air source heat pumps around Bridgemary
At about 2 miles from the coast, Bridgemary is close enough for sea air to matter. Coastal sites are worth mentioning at the survey, as salt air affects the outdoor unit and its fixings. The Valuation Office Agency’s council tax figures date about 70% of homes in Bridgemary and the neighbourhoods around it to the post-war years, 1945 to 1972. For homes of that age, the survey checks the insulation, the radiators and the hot water setup.
A heat loss calculation decides the size of heat pump your home needs. Period properties close to St Matthew's can suit a heat pump, though insulation and any heritage protection are checked first.
Bridgemary is about 1 mile north-west of Gosport, in Hampshire. We cover Bridgemary for air source heat pumps, along with the rest of Hampshire. We cover 683 places across Hampshire, large and small. For properties nearby, see our Worthing page, about 34 miles away.
Jobs in PO13 and PO12 are looked at, quoted and booked the same way as anywhere else. If you need air source heat pumps at a property on Camp Road, Copse Lane and Agnew Road or a nearby road, our engineers can take on the work. Close to Bridgemary, our area also takes in Rowner (1 mile north-west), Peel Common (1 mile west), Elson (1 mile south-east), Crofton (1 mile west) and Gosport (1 mile south-east). Larger places within reach include Havant (9 miles east), Eastleigh (13 miles north-west), Fareham (3 miles north-west) and Horndean (9 miles north-east).
Around Bridgemary
Locally, jobs take us to houses, flats and workplaces close to The Green Dragon pub and Bridgemary School and the streets around them. The closest station to Bridgemary is Fareham station, roughly 2.5 miles north-west of the centre. Other landmarks nearby include Search (2.6 miles south-east) and Portchester Castle (2.7 miles north-east). For a walk, there’s West of the River Alver and Portsdown Hill.
When something else is needed
An honest diagnosis matters more to us than a booking, so here’s what this work cannot put right:
- Draught-proofing and insulation upgrades
- Any gas work on the existing boiler
- Tax advice on your own circumstances
If you are not sure, just ring us on 07833 053749, or email if that’s easier and we will give you a straight answer before booking.
What we work on in Bridgemary
- Homes heated by oil, LPG or gas
- Air-to-air heat pumps
- Air-to-water heat pumps
- Underfloor heating
- Radiator systems
- Hot water cylinders
What affects the cost of air source heat pumps
A fixed price needs a few facts first. We check:
- Whether it’s a simple split or a larger system
- Which make and model is being fitted or worked on
- The condition of any existing system
No two properties are the same, so each one gets its own fixed-price quote. The equipment, how we reach it, the route between units and the work needed all play a part.
Asking for a quote
Photos and a few facts are often enough to price a simple job. Send what you can of the following:
- The postcode and whether it’s a home, flat or business
- The outside wall, roof or yard where the outdoor unit sits or would go
- Your consumer unit or fuse board
Our prices page gives typical ranges, but your quote is based on your job, because no two buildings, rooms or systems are the same. After a look at the job, by photos or a survey, the price is fixed. To start, ring 07833 053749 or fill in the contact form.
Also near Bridgemary
Other services in Bridgemary
Let and managed properties
When the building owner and the occupier are different, it’s worth checking the agreement for who looks after the system. We can quote either party, and the paperwork can go to both.
We regularly work with managing agents. Tell us the property, the work and the access arrangements, and we’ll send a fixed-price quote.
What we do, step by step
Testing is the last part of the visit wherever the system can be switched on. Then we show you what we’ve done and answer any questions, and anything that needs attention later is pointed out. All told, the work takes from a couple of days to around a week, depending on the system and how much of the heating changes. Around Bridgemary, access is normally simple, though gates and garden access are worth mentioning.
- First we find out about the property, the heating you have now and what you’re hoping for.
- The survey measures heat loss room by room and looks at radiators, hot water and the best spot for the outdoor unit.
- We send a fixed-price quote that shows the equipment, the grant position and the VAT.
- The outdoor unit, the indoor equipment and the controls are installed and connected.
- We commission the heat pump, complete the MCS paperwork and talk you through the controls.
Preparing for the visit
- Make sure we can reach the outdoor unit, or where it will go
- Let us know where the consumer unit is
- Mention any managing agent or landlord rules we need to follow
Getting a price
Photos are enough for some jobs; others need a visit first. Bigger systems, commercial sites and awkward pipe routes are normally surveyed on site. Either way, the quote is fixed before anything goes ahead.
Read more
Common questions in Bridgemary
Is the heat pump grant available in Bridgemary?
Yes, if the home and the heat pump meet the scheme’s rules: Bridgemary is in England, where it applies. Air-to-water and ground source systems attract £7,500. Air-to-air gets £2,500, but only where it takes over from fossil-fuel heating and covers the whole home’s heating demand. We hold MCS certification, so the application is ours to make for you.
Does being near the sea make a difference to air source heat pumps in Bridgemary?
It can, as Bridgemary is within about 2 miles of the sea, where salt in the air is hard on coils and fixings. We site outdoor units out of the worst of the sea wind where possible and can suggest models with corrosion protection where the manufacturer offers it.
Can I do the refrigerant work myself?
The refrigerant side has to be done by a qualified engineer working for an F-Gas certified company. That’s a legal requirement, and manufacturers expect it for their warranty too. We’re happy to quote for the full job, supply to commissioning.
How quickly will you reply?
You will hear from us the same working day. If it’s an emergency, ring the 24/7 line instead.
Do you protect the property while you work?
Protection goes down first: dust sheets over floors and anything close to the work. Holes and fixings are agreed with you, and we clean up afterwards when we finish.
Do I need new radiators for a heat pump?
That depends on the room’s heat loss and the radiator’s size. We check them all during the survey and the quote shows what’s needed.
How long does a heat pump installation take?
A typical installation takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. The programme is planned to keep time without heating short, and we explain it in advance.
From one of our customers
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager