Essex · Heat pump installation
Heat pump installers in Black Notley
Air source heat pumps in and around Black Notley, from the first look to the final check and a fixed price agreed before work begins.
- Comparing heat pump types
- Deciding on the outdoor unit position
- Checking whether planning permission is needed
What a heat pump looks like in Black Notley
About 37 miles out from central London, Black Notley is part of the South East area we work across.
Older homes near Church of St Peter and St Paul may need extra checks for planning and heat loss before a heat pump is designed. Homeowners near Cressing station often ask whether a heat pump can take over from the boiler, and the heat loss survey answers that.
Black Notley is about 2 miles south of Braintree, in Essex. Homes and businesses alike in Black Notley, we can help with air source heat pumps. We reply to enquiries the same working day, and there’s a 24/7 emergency line. Count every place we list in Essex and you reach 644, with Black Notley on the list. London, roughly 37 miles off, has its own page on this site.
Every address in CM77 is covered, from the main roads to the quietest streets. Streets in the area include Church Road, Hospital Field and Mary Ruck Way, each of them within reach. Neighbouring places we cover include The Green (1 mile south-east), Tye Green (1 mile east), Row Green (1 mile west), Long Green (1 mile north-east) and Hawbush Green (1 mile east). We also work in nearby towns such as Colchester (14 miles east), Chelmsford (9 miles south-west), Maldon (10 miles south-east) and Witham (5 miles south-east).
What’s near Black Notley
Locally, jobs take us to houses, flats and workplaces close to Hoppit Mead, The Vine Inn and Cressing Primary School. The nearest railway station is Cressing station, roughly 0.6 miles east of the centre. Nearby you’ll also find Cressing Temple (2.2 miles south-east) and William Julien Courtauld Hospital (1.8 miles north-west). The countryside around Black Notley includes Sandylay and Moat Woods.
Air source heat pumps in Black Notley
Many air source heat pumps can be installed as permitted development in England, without a planning application. Conditions include a maximum outdoor unit size of 1.5 m³, compliance with MCS 020(a), use for more than cooling alone and a site outside the curtilage of a listed building. We look at the planning position for your home during the survey. Common call-outs are for radiators that may be too small for a heat pump and a boiler that’s getting old, on radiator systems, air-to-air heat pumps and air-to-water heat pumps.
Space for an outdoor unit is rarely an issue near Black Notley, so the design comes down to heat loss, radiators and hot water.
AirCon Doctor is an F-Gas certified company and NICEIC approved for electrical work, MCS certified for heat pumps and a Checkatrade member. Refrigerant work is done by engineers who hold the F-gas qualifications the law requires.
- Location
- Black Notley (CM77)
- Wider area
- Essex
- Certified
- F-Gas certified company, NICEIC approved, MCS
- Prices
- £8,000–£16,000 (0% VAT on homes), before the grant
- Quotes
- Fixed after a survey or photos
- Phone
- 07833 053749
- Last updated
- 30 October 2026
What air source heat pumps can’t fix
In fairness, there are a few things this work will not fix:
- Formal advice on VAT for your situation
- Improving the building’s insulation
- Gas boiler work, such as disconnecting the old boiler, which needs a Gas Safe registered engineer
If you are not sure, just call 07833 053749 or fill in the contact form and we will give you a straight answer before you book.
What the work covers
- Homes heated by oil, LPG or gas
- Radiator systems
- Hot water cylinders
- Air-to-water heat pumps
- Underfloor heating
- Air-to-air heat pumps
How it works
Everything the job needs comes with us, from tools and test equipment to ladders and dust sheets. All we ask is clear access to the units, or to where they’ll go, and to the consumer unit. The visit takes several days for an air-to-water system with a new cylinder, less for an air-to-air system. Seeing the property in pictures first means the trip to Black Notley can be planned properly.
- It starts with a conversation about the home, the existing heating and your plans.
- We survey the home room by room for heat loss, and check the emitters, hot water and outdoor unit position.
- A fixed-price quote follows, setting out the system, any grant that applies and the VAT.
- We fit the outdoor unit and connect it to the heating, hot water and controls.
- Once it’s running correctly, the MCS certificate is issued and we show you the settings.
Preparing for the visit
- Make sure we can reach the outdoor unit, or where it will go
- Let us know where the consumer unit is
- Clear the space around the indoor unit, or where it will go
Ask for a quote
Some jobs can be priced from pictures, while others need a survey. Bigger systems, commercial sites and awkward pipe routes are normally surveyed on site. Either way, you get a fixed price before any work is booked.
Related advice
FAQs for Black Notley
Can I get the Boiler Upgrade Scheme grant in Black Notley?
Yes, the scheme covers homes in England, including Black Notley, if they qualify. Whether your home qualifies, and for how much, depends on the type of heat pump and the heating it replaces. We hold MCS certification, so the application is ours to make for you.
Can I fit a heat pump in Black Notley without planning permission?
It comes down to the building and the spot chosen for the outdoor unit. The half-mile around the middle of Black Notley holds about 16 listed buildings and structures. The permitted development rules for heat pumps leave out listed buildings and stop outdoor units going on road-facing walls or roofs in conservation areas. Anything outside the rules needs an application, and we raise it with the planning department at Braintree council, typically the authority for Black Notley first.
How long does a heat pump installation take?
Expect it to take a few days for most air-to-water installations, with air-to-air systems often quicker. How much of the heating changes decides most of the time and the timing is set out with your quote.
Do I get paperwork after the visit?
Yes. It’s the record a manufacturer or the next engineer will ask to see: a dated note of the work, with refrigerant details where they apply.
Will skipping a service affect the warranty?
It can, for some brands. Read the manufacturer’s terms, or send us the make and model and we will explain them, and book the service at the interval they recommend.
Can you look at a system you didn’t fit?
Yes. Systems fitted by other companies are fine from all the leading brands. Tell us the make and model and send any paperwork you have.
Do you have a 24/7 line?
Yes, 24/7. Call the emergency line and tell us the make, the symptoms and any error code, and we’ll advise on what to do next.
System by system
Radiators and underfloor heating
Underfloor heating suits a heat pump’s lower flow temperature, and we can connect to it where it’s already in.
Hot water cylinders
An older cylinder may not suit a heat pump, and we explain whether yours can stay.
Also near Black Notley
Other services in Black Notley
Before you call an engineer
There are a few things you can safely do yourself: keep the outdoor unit clear of leaves, plants and clutter, check the settings and the remote, and follow the cleaning the manual describes. Anything inside the units, the electrics and the refrigerant is engineer’s work.
On air conditioning, the filters in the indoor unit are normally the one part owners can clean, if the manual says so. They come out, get a gentle clean and go back only when they’re dry. For a heat pump, the main owner jobs are a clear outdoor unit and sensible control settings.
A customer’s words
“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”
David W., Haywards Heath