West Berkshire · Heat pump installation
Beenham air source heat pumps
We cover Beenham for heat pump installation. A look at the job first, a fixed-price quote and written records at the end.
- Checking emitters for a heat pump
- An oil, LPG or gas boiler near the end of its life
- Finding a place for the outdoor unit
Air source heat pumps in Beenham
A heat pump takes heat from the outside air and moves it into your home with electricity running the compressor and fans. It works on the same principle as air conditioning, run the other way, and air-to-air heat pumps are sometimes simply called air conditioning. If you are dealing with working out whether radiators need upsizing and plans to switch to electric heating with a heat pump, we can sort it out.
For a home around Beenham that’s off mains gas and heated by oil or LPG, the Boiler Upgrade Scheme adds an extra £1,500 until March 2027 for an air source or ground source heat pump.
Warranty periods vary by brand and by product. Daikin, for instance, gives a standard 2 years on split air conditioning, with longer extensions only on its air-to-water heat pumps. For any other brand, we explain the manufacturer’s terms on your quote.
- Location
- Beenham (RG7)
- Region
- West Berkshire
- Pricing
- A fixed-price quote up front
- Accreditations
- NICEIC and F-Gas, MCS
- Response
- On the working day you ask
- Guide price
- £8,000–£16,000 (0% VAT on homes), before the grant
- Phone
- 07833 053749
- Page updated
- 30 October 2026
Why act early in Beenham
Planning rules have specific conditions. Checking the position for your home at the survey stage avoids surprises later covering listed buildings, conservation areas and any Article 4 direction. Small faults tend to grow, so it’s worth dealing with them early.
The pipe route, the height of the units and how we reach them all affect the cost. Each of those is built into the quote, and the price is fixed before we start.
Why us?
- Members of Checkatrade
- F-Gas company certification
- One number for homes and businesses across London and the South East
- Clear warranty information from the manufacturer
See our cost guide and our accreditations.
What a heat pump looks like in Beenham
The 2021 Census found about 73% of households in detached or semi-detached houses. Houses usually have space for an outdoor unit and a hot water cylinder.
A heat loss calculation decides the size of heat pump your home needs. If your home is one of the older properties near Church of St Mary, the survey checks whether it’s listed or in a conservation area before the outdoor unit position is chosen.
Beenham is about 4 miles north of Tadley, in West Berkshire. Beenham gets the same approach as every job we take on: diagnosis first, a fixed price and proper paperwork when we have finished. Count every place we list in West Berkshire and you reach 155, with Beenham on the list. We also work in Guildford, about 28 miles from Beenham.
Stoneyfield, Back Lane and Church View and the roads off them are all inside our area. If your postcode is in RG7, the property is within reach. Places around Beenham that are also on our list: Beenham Stocks (1 mile north-east), Upper Woolhampton (1 mile south-west), Southend (1 mile north), Lower Padworth (1 mile south-east) and Chapel Row (1 mile west). We also work in nearby towns such as Newbury (8 miles west), Thatcham (5 miles west), Burghfield Common (4 miles east) and Speenhamland (8 miles west).
Local landmarks in Beenham
Locally, jobs take us to houses, flats and workplaces close to The Six Bells pub and the streets around them. The closest station to Beenham is Aldermaston station, about 1.1 miles south-east of the centre. Other landmarks nearby include Yattendon Castle (4.3 miles north-west) and Thames Valley Police Museum (3.1 miles east). Open spaces near Beenham include Hosehill Lake and Moor Copse Nature Reserve.
Nearby places to Beenham
What else we do in Beenham
Owner checks or an engineer?
Write down what you notice: error codes, noises, drips, smells or a drop in performance. It helps us diagnose quickly, and a photo of the display helps even more.
Some faults have simple causes you can check first: is the system in the right mode, is the set temperature sensible, are the remote’s batteries working and has the breaker tripped. If a breaker trips again after you reset it, leave it off and phone 07833 053749 or write to us at info@aircondoctor.co.uk.
FAQs for Beenham
Will a heat pump in Beenham need planning permission?
It depends on the property. Around 17 listed entries sit within 0.5 miles of central Beenham. Heat pumps on houses are often permitted development, but listed buildings need consent and conservation areas restrict outdoor units facing a road. Where it’s needed, we check with the planning department at West Berkshire council, typically the authority for Beenham.
Is Beenham within the area you cover?
We do. Villages and hamlets get the same service as the bigger towns. Visits to smaller places are planned so the engineer arrives with what the job needs.
Why use an F-Gas certified company?
The law says any company working on equipment containing F gas has to be certified, and the engineers need their own qualifications. It means the refrigerant in your system is handled legally.
Do you work on systems someone else installed?
Yes. We look at it first and tell you what we find, including anything about the original installation that needs putting right. You get a fixed price before any work goes ahead.
Do you work on all makes?
We install and work on the leading makes, from Mitsubishi Electric, Daikin and Fujitsu to Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries and Hitachi. Tell us the make and model and we’ll take it from there.
What’s the difference between air-to-water and air-to-air heat pumps?
Air-to-water suits homes with radiators and a cylinder; air-to-air suits rooms that need heating and cooling. The survey helps decide. Both are part of what we install.
How does the warranty work?
Warranty is the manufacturer’s own, on its terms. Terms differ by brand, and we set them out on your quote.
How the visit works
Each visit runs to the same pattern: check the plan with you, put the dust sheets down, do the work, test what we have done and talk you through it. On site, the work takes from a couple of days to around a week, depending on the system and how much of the heating changes. Photos of the room and the outside of the property help us plan a visit to Beenham.
- It begins with your house and the heating it relies on now.
- We measure heat loss for every room.
- From those figures we size the heat pump and decide on radiators, cylinder and outdoor position.
- A fixed-price quote explains the cost, the grant position and the VAT.
- Installation, commissioning and MCS registration complete the job.
Getting ready for the visit
- Let us know where the consumer unit is
- Clear a path to the units and the space around them
- Tell us about access, such as roof hatches, high walls or locked plant areas
Getting a price
VAT is set out clearly on every quote, and the rate that applies to your job is stated. Homes, businesses and different kinds of work can be treated differently for VAT, so we confirm it on the quote. For a fixed-price quote, phone 07833 053749.
Advice
How the job changes from property to property
Air-to-water heat pumps
Air-to-water systems work at lower temperatures than boilers, which is why radiator sizing is part of the survey.
Hot water cylinders
An air-to-water heat pump heats hot water through a cylinder. Space for the cylinder is part of the survey, especially if you have a combi boiler.
What a customer said
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead