Kent · Heat pump installation

Heat pump installation in Bean, Kent

For air source heat pumps in Bean, choose an F-Gas certified, NICEIC approved company. Fixed-price quotes and a 24/7 emergency line.

  • No space for a hot water cylinder
  • Checking eligibility for a heat pump grant
  • Choosing between air-to-water and air-to-air

Air source heat pumps in Bean

Air source heat pumps in Bean, done properly

An air-to-water heat pump heats water to a lower temperature than a typical boiler, so radiators may need to be larger to give out the same heat. We check each radiator against the room’s heat loss and anything that needs changing is in the quote. The work covers air-to-air heat pumps, homes heated by oil, LPG or gas and hot water cylinders, and common reasons people get in touch are not knowing whether a grant applies and a boiler that’s getting old.

Homes around Bean normally have room outside for a heat pump, so the design comes down to heat loss, radiators and hot water.

Equipment warranty comes from the manufacturer, on its own terms, and we set them out on your quote. Terms differ from brand to brand, so we go through them with you rather than leave you to find the small print.

Location
Bean (DA2)
Region
Kent
Accreditations
NICEIC approved, F-Gas certified, MCS
Quotes
Fixed-price quote after a site survey
Price guide
Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
Telephone
07833 053749
Checked
30 October 2026

After we’ve gone

Think of this as the after-treatment advice, short and simple:

  • Diary the next service
  • Read the manufacturer’s warranty terms for your brand
  • Check eligibility for the Boiler Upgrade Scheme early

Once commissioned, we register the installation with MCS and give you the certificate. File it with the warranty documents, as you may need it later.

Leave space around the outdoor unit. It needs good airflow to collect heat from outside so keep it unobstructed.

Questions from Bean

Is planning permission needed for a heat pump in Bean?

That depends on the building and where the outdoor unit goes. Around 3 listed entries sit within 0.5 miles of central Bean. The permitted development rules for heat pumps leave out listed buildings and stop outdoor units going on road-facing walls or roofs in conservation areas. Anything outside the rules needs an application, and we raise it with the planning department at Dartford council, normally the authority for Bean first.

Is Bean within the area you cover?

Yes, and the size of the place makes no difference to how we work. We’re based in East Grinstead and plan each visit so the job can be finished in one trip where possible.

Can landlords and managing agents book you?

Yes. From one rented home to commercial buildings, the approach is the same: survey or diagnosis, a fixed price and proper paperwork.

Is the equipment covered by a warranty?

It’s the manufacturer’s warranty, which varies by brand. Daikin, for instance, gives a standard 2 years on split air conditioning, and we explain the terms for whichever brand you choose.

How soon will you get back to me?

The same working day. Then we agree a date that works for you, and you get a fixed price before any work goes ahead.

Can I do the refrigerant work myself?

Not the refrigerant work. The F-gas rules require certified companies and qualified engineers for it, and a new circuit is notifiable under Part P unless a registered electrician, such as a NICEIC approved contractor, does it.

Why use an F-Gas certified company?

F-Gas certification shows a company is approved to work on equipment containing fluorinated gases, such as the refrigerant in air conditioning and heat pumps. In Great Britain, that certification is a legal requirement, not an optional extra, and we hold it.

How it works

Anything involving refrigerant is handled by F-Gas qualified engineers, as the law requires, while the electrical side is covered by our NICEIC approval. So on the day, you don’t need a separate electrician for the electrical side. On site, it takes a few days for most air-to-water installations, with air-to-air systems often quicker. Rural lanes and tight entrances are worth mentioning before a visit to Bean.

  1. Step one is understanding the house, how it’s heated today and what you’d like to change.
  2. On the visit we calculate what every room loses on a cold day, then check the radiators, room for a cylinder and outdoor unit options.
  3. We send a fixed-price quote that shows the equipment, the grant position and the VAT.
  4. The outdoor unit, the indoor equipment and the controls are installed and connected.
  5. We commission the heat pump, complete the MCS paperwork and talk you through the controls.

Preparing for the visit

  • Unlock any gate, garage or side passage we need
  • Mention any parking restrictions near the property
  • Mention any managing agent or landlord rules we need to follow

How to get a quote

The quickest way to a quote is to send photos: the room or the existing unit, the outside wall or roof where the outdoor unit sits or would go, and the label on any existing unit. Tell us the address and what you need, and simple jobs can often be priced without a visit.

Get a quick quote

Read more

Air source heat pumps around Bean

Valuation Office Agency council tax records date about 50% of homes in Bean and the neighbourhoods around it to the post-war years, 1945 to 1972, and Census 2021 figures found about 60% of households in detached or semi-detached houses. Homes of that age often have cavity walls that may or may not be insulated, which the survey checks. Detached and semi-detached houses usually have room for the outdoor unit and a cylinder.

Every heat pump design starts with a room-by-room heat loss calculation. The installer applies for the Boiler Upgrade Scheme grant, and we’re MCS certified.

Bean is about 3 miles west of Northfleet, in Kent. We cover Bean for air source heat pumps and across the rest of Kent. Count every place we list in Kent and you reach 922, with Bean on the list. We also work in Bromley, about 12 miles from Bean.

Our nearest recent job to Bean was on Station Road, Orpington (BR6), about 8 miles west: installing three Daikin cassette units in the main office area and a wall-mounted unit in the client meeting room.

Main roads around Bean include the B255, which makes travel easy. High Street, Drudgeon Way and Foxwood Road and the roads off them are all inside our area. We also cover the places around Bean: Green Street Green (1 mile south), Westwood (1 mile south-east), Darenth (1 mile west), Swanscombe (1 mile north) and Grubb Street (1 mile south). We also work in nearby towns such as Maidstone (15 miles south-east), Dartford (3 miles north-west), Sevenoaks (11 miles south-west) and Gravesend (4 miles east).

Local landmarks in Bean

Around Bean, our work takes us to homes and businesses near Beacon Wood Country Park, The Ebbsfleet Academy and The Black Horse pub, among other places. Bean’s nearest station is Greenhithe for Bluewater station, roughly 1.7 miles north. Other landmarks nearby include Stone Museum of Geology (2.2 miles north-west) and Stone Castle (1.2 miles north). Open spaces near Bean include Chafford Gorges Nature Park and Sawyers Lake.

Map of Bean © OpenStreetMap contributors

When it’s something else

An honest diagnosis matters more to us than a booking, so here’s what air source heat pumps won’t do:

  • Draught-proofing and insulation upgrades
  • A grant for a home that doesn’t meet the scheme rules
  • Planning decisions, which rest with the council

If in doubt, give us a ring on 07833 053749, or email if that’s easier and we will say what we think before you book.

What we work on in Bean

  • Air-to-air heat pumps
  • Air-to-water heat pumps
  • Radiator systems
  • Hot water cylinders
  • Underfloor heating
  • Homes heated by oil, LPG or gas

Rented and managed buildings

Keeping records across a portfolio is half the battle. Each visit produces a dated record, plus the F-Gas records where refrigerant is involved, so you can show what was done and when.

Bigger systems bring extra duties: a TM44 inspection by an accredited energy assessor is required at least every 5 years for systems over 12 kW. We can arrange it, prepare the system for it and fix what it finds.

What a customer said

“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”

James T., Crawley, office manager

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead