Oxfordshire · Heat pump installation
Balscote air source heat pumps
Air source heat pumps for Balscote, from F-Gas certified engineers, with the manufacturer’s warranty terms explained on your quote. We reply to enquiries the same working day.
- Deciding which kind of heat pump suits the home
- No space for a hot water cylinder
- Ageing boilers that will need replacing
Air source heat pumps in Balscote, done properly
Many air source heat pumps can be installed as permitted development in England, without a planning application. Conditions include a maximum outdoor unit size of 1.5 m³, compliance with MCS 020(a), use for more than cooling alone and a site outside the curtilage of a listed building. We look at the planning position for your home during the survey. The work covers radiator systems, homes heated by oil, LPG or gas and underfloor heating, and the jobs we see most are comparing heat pump types and checking whether planning permission is needed.
If your home in or near Balscote is heated by oil, LPG or electric heaters with no mains gas, an extra £1,500 is available through the Boiler Upgrade Scheme until March 2027, on top of the £7,500.
Equipment warranty comes from the manufacturer, on its own terms, and we set them out on your quote. Each brand sets its own conditions, and we’re happy to talk you through them.
- Where
- Balscote (OX15)
- Wider area
- Oxfordshire
- Credentials
- F-Gas certified company, NICEIC approved, MCS
- Enquiries
- Answered the same working day
- Price
- Fixed-price quote after a site survey
- Price guide
- Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
- Call
- 07833 053749
- Reviewed
- 30 October 2026
What a heat pump looks like in Balscote
Valuation Office Agency council tax records show about 37% of homes in Balscote and the neighbourhoods around it were built in 2000 or later, and Census 2021 figures found about 78% of households in detached or semi-detached houses. Newer homes typically lose less heat, which tends to suit a heat pump well. Houses usually have space for an outdoor unit and a hot water cylinder.
Older homes near Church of St Mary Magdalene may need extra checks for planning and heat loss before a heat pump is designed.
Balscote is about 4 miles west of Banbury, in Oxfordshire. For air source heat pumps in and around Balscote, please give us a ring on 07833 053749 or write to us at info@aircondoctor.co.uk for a fixed-price quote. Our area covers London and the South East, including Balscote. 443 places in Oxfordshire are on our list, from busy centres to quieter spots. There’s also a page for Guildford, roughly 68 miles from Balscote.
Postcode districts we cover here: OX15. Places around Balscote that are also on our list: Shutford (1 mile south), Alkerton (1 mile north-west), Shenington (1 mile north-west), Epwell (2 miles west) and Tadmarton (2 miles south). Further out, we also cover Banbury (4 miles east), Chipping Norton (10 miles south-west), Neithrop (3 miles east) and Grimsbury (5 miles east).
Near you in Balscote
We fit and service air conditioning in homes and premises around The Butchers Arms Public House. The nearest railway station is Banbury station, about 4.5 miles east. Well-known places in the area include Horton General Hospital (4.2 miles east) and W. O. Bentley Memorial Foundation (1.1 miles north-east). For a walk, there’s Woodford Bottom and Lamb's Pool and Edge Hill.
When to call us in Balscote
People also ask about air-to-air heat pumps because they heat and cool. They heat rooms through wall, floor or ceiling units, and can cool them when it’s hot. The grant only applies in some cases, so we check first.
Common reasons people call us include:
- A boiler that is getting old
- No space for a hot water cylinder
- Checking whether planning permission is needed
If your home is listed, like Upton House about 2.8 miles north-west, listed building consent comes before any heat pump work.
What your quote should include
- If the figure could change on the day
- Proof of F-Gas company certification
- The make and model of any parts or equipment being quoted
Balscote: your questions answered
Will a heat pump in Balscote need planning permission?
The answer turns on the property and where the outdoor unit would sit. The centre of Balscote is in the Balscote Conservation Area. On a house, an air source heat pump can often go ahead under permitted development, with an outdoor unit of no more than 1.5 cubic metres and an installation that meets MCS 020(a), which includes a noise check. Those rights don’t reach the grounds of a listed building, and conservation areas rule out walls or roofs facing a road. If that might affect you, we ask Cherwell council, which is normally the planning authority for Balscote.
Do you cover smaller places like Balscote?
Yes, smaller places are covered as well as towns. Send a few details and photos, and we reply the same working day.
Is there a survey before the work?
Yes. Photos often do the job for simple work, while larger systems and faults that need testing are seen on site.
Will my home qualify for the Boiler Upgrade Scheme?
We check the scheme rules for your property before you go ahead. The installer applies for the grant, so we handle the application if you’re eligible.
How much time does a heat pump install need?
A typical installation takes several days for an air-to-water system with a new cylinder, less for an air-to-air system. The programme is planned to keep time without heating short and agreed before we start.
What VAT do I pay on a heat pump?
Heat pumps in homes carry 0% VAT until 31 March 2027, with 5% from 1 April 2027. Businesses pay the standard rate, and this is general information rather than tax advice.
Who is responsible for leak checks?
Responsibility is shared between the operator, normally whoever owns or controls the equipment, and the service technicians. How often depends on the size of the refrigerant charge in tonnes of CO2 equivalent: at least every 12 months from 5 tCO2e, and every 6 months from 50 tCO2e.
Different systems, different jobs
Radiators and underfloor heating
Any radiator changes are set out in the quote, so the work is clear.
Heat loss surveys
The survey covers the building fabric and how air moves through it along with the room sizes.
The process
There’s very little for you to do on the day. Someone needs to let us in and show us the units, or where they’re going, and we take it from there. Before we leave, the area is tidied and we explain what we have done. Photos of the room and the outside of the property help us plan a visit to Balscote.
- First we talk through the property and the current system.
- We measure heat loss for every room.
- From those figures we size the heat pump and decide on radiators, cylinder and outdoor position.
- Cost, grant and VAT appear on one fixed-price quote.
- Then it’s fitted, commissioned and registered with MCS.
Preparing for the visit
- Make sure someone can let us in at the agreed time
- Tell us about parking and loading
- Find the manual or the paperwork for the system, if you have it
Ask for a quote
Some jobs can be priced from photos, while others need a survey. Bigger systems, commercial sites and awkward pipe routes are normally surveyed on site. Either way, the quote is fixed before anything goes ahead.
Related advice
Also near Balscote
Other services in Balscote
What happens if it’s left?
Replacing a boiler in a hurry when it breaks leaves little time to consider a heat pump. Planning ahead gives time for the heat loss survey, the design and the grant application before you need the heat. For a village like Balscote, booking ahead lets us plan the trip properly.
Typical ranges are on our prices page, but your price depends on the job in front of us. For a fixed-price quote, ring 07833 053749, and we will explain what it covers.
Why choose AirCon Doctor in Balscote
- Clear warranty information from the manufacturer
- A 24/7 emergency line
- Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba and more
- Covering London and the South East
See what air conditioning costs and how to check a contractor.
A customer’s words
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead