Oxfordshire · Air conditioning installation
Air con installers in Berrick Salome
Our engineers work in Berrick Salome on air conditioning. A look at the job first, a fixed-price quote and written records at the end.
- A loft room or top floor that bakes in summer
- An office, shop or restaurant that is uncomfortable for staff and customers
- Working from home in a room that gets too warm
Air conditioning for homes and businesses in Berrick Salome
Across Berrick Salome, every installation follows the same steps: survey, fixed-price quote, a neat installation, full commissioning and the F-Gas paperwork. You know the price before any work starts and the paperwork is in your hands when we finish. Whether you call it air con, air conditioning or an air-to-air heat pump, in Berrick Salome it means the same thing to us: the right unit in the right place, fitted and commissioned properly.
Around Berrick Salome, many people choose a system that heats as well as cools, which suits rooms the main heating doesn’t reach well, such as a garden room or loft.
Think of the paperwork as the system’s health record: a dated account of the work and the readings we took. It makes the next visit quicker and any warranty question simpler, so keep it safe.
- Where
- Berrick Salome (OX10)
- Region
- Oxfordshire
- Quotes
- A fixed-price quote up front
- Typical price
- One room: £1,200–£2,200 + VAT
- Certified
- NICEIC approved, F-Gas certified
- Call
- 07833 053749
- Last updated
- 30 October 2026
How it works
Anything involving refrigerant is handled by F-Gas qualified engineers, as the law requires, and electrical work is done by us as NICEIC approved contractors. So on the day, you don’t need a separate electrician for the electrical side. The work takes a day for most single-room installations, with multi-split, ducted and cassette systems taking longer. Rural lanes and tight entrances are worth mentioning before a visit to Berrick Salome.
- First comes a site survey, or pictures and measurements for a straightforward job.
- We size the system for each room, then send a fixed-price quote with the units and where they go.
- The units go up and the pipework, cable and condensate drain are run neatly between them.
- We connect the supply, pressure test the pipework and evacuate it before the refrigerant is released.
- Last comes the run-up: every mode checked, the controls explained and the paperwork left with you.
Getting ready for the visit
- Make sure we can reach the consumer unit or fuse board
- Find the manual or the paperwork for the system, if you have it
- Let us know if the building has a permit or sign-in process
Get a fixed-price quote
Every quote starts with a look at the job, from a site survey or, where the job is straightforward, from photos and measurements. Then you get a fixed price so you know the cost before we begin.
Advice
When something else is needed
In fairness, some problems need a different answer:
- Gas boiler or central heating faults (we do not work on gas boilers)
- Damp or condensation caused by leaks or poor ventilation in the building (that needs the cause fixing)
- A room that can’t take an outdoor unit or pipe route without the landlord’s, management company’s or council’s consent (that consent comes first)
If you are not sure, just call us on 07833 053749 or drop us a line and we’ll give you a straight answer before booking.
Parts of the system we cover
- Wall-mounted split systems
- Air-to-air heat pumps
- Ducted systems
- VRF systems
- Multi-split systems
- Ceiling cassettes
Nearby places to Berrick Salome
More services for Berrick Salome
Why it’s worth doing now in Berrick Salome
New systems now use lower-impact refrigerants. From 2025, single splits under 3 kg can’t use refrigerants with a GWP over 750, so new splits use refrigerants such as R32, with a GWP of 675. R410A, used in many older systems, has a GWP of 2088. A system that is left with a fault, or without a service, typically costs more to run.
The pipe route, the height of the units and how we reach them all affect the cost. We take each of them into account, and the price is fixed before any work starts.
What you get with us
- Warranty terms set out brand by brand
- Members of Checkatrade
- MCS certified for heat pumps
- Enquiries answered the same working day
Read how installs are priced and our accreditations and certificates.
FAQs for Berrick Salome
Can you do air conditioning in Berrick Salome?
Yes. We work across London and the South East from our base in East Grinstead, and Berrick Salome is part of that. To start, ring 07833 053749 or send an email with a few photos.
Can I fit air conditioning in Berrick Salome without planning permission?
It depends on the property. The Berwick Salome Conservation Area is close to the centre of Berrick Salome. Permitted development only covers heat pumps that aren’t used solely for cooling, and not within the grounds of a listed building. Conservation areas add limits on outdoor units facing a road. Where necessary, we check with South Oxfordshire council, which is typically the planning authority for Berrick Salome.
Why use an F-Gas certified company?
Companies working on equipment that contains F gas must be certified by an approved body, and each engineer needs the right qualifications too. It means the refrigerant in your system is handled legally.
How long will the installation take?
A single-room system is usually fitted in a day. Multi-split, ducted and cassette systems take longer, and we tell you how long on the quote.
Can I do the refrigerant work myself?
No, not the refrigerant side. The F-gas rules require certified companies and qualified engineers for it, and a new circuit is notifiable under Part P unless a registered electrician, such as a NICEIC approved contractor, does it.
Can I use air conditioning to heat a room?
In most cases, yes: modern splits are normally heat pumps, so they heat as well as cool. The Energy Saving Trust notes that air-to-air heat pumps are sometimes referred to as air conditioning. We confirm the heating function of the model we quote.
How much does air conditioning installation cost?
From £1,200 + VAT for a single-room split, with a typical range of £1,200–£2,200 + VAT. That covers supply, installation, commissioning and the F-Gas paperwork, and we fix it after a survey or from your pictures.
Homes in Berrick Salome and air conditioning
VOA council tax data date about 40% of homes across Berrick Salome and its surrounding area to the post-war years, 1945 to 1972, and the 2021 Census found about 85% of households in detached or semi-detached houses. Homes of that age normally have cavity or solid brick walls, and we check which before planning the pipe route. A side passage or back wall normally gives the outdoor unit a home, and more than one bedroom can be cooled through a multi-split.
Living close to Church of St Helen? Some older properties in parts like that are protected, and the survey finds out whether yours is. About 3.5 miles south-west stands Brightwell Manor. Listed homes in any area need consent first, so tell us if yours is one.
Berrick Salome is about 7 miles east of Didcot, in Oxfordshire. Anywhere in OX10, we cover air conditioning. 443 places in Oxfordshire are on our list, large and small. For properties nearby, see our Guildford page (36 miles or so).
All of OX10 is covered, from the main roads to the quietest streets. Other places close to Berrick Salome include Great Holcombe (1 mile north-west), Warborough (1 mile west), Newington (2 miles north), Benson (2 miles south) and Shillingford (2 miles south-west). Further out, we also cover Oxford (9 miles north-west), Didcot (7 miles west), Abingdon-on-Thames (8 miles west) and Thame (9 miles north-east).
Local landmarks in Berrick Salome
Typical jobs here are in properties near The Chequers pub. A little further out are Wallingford Castle (3 miles south) and Aston Martin Heritage Trust Museum (1.7 miles north-west). Not far away are Ewelme Watercress Beds and Wittenham Clumps.
Looking after your system
Every system needs looking after, and most of it is easy. A few tips:
- Let filters dry fully before you put them back
- Report drips, noises or error codes straight away
- File the paperwork with the manual
We show you how to take the filters out and clean them. In busy periods, clean them every few weeks, following the manual, and keep the outdoor unit clear of leaves and clutter.
Don’t ignore small changes. A drip, a noise or a flashing light is often an early sign of a fault and catching it early keeps the repair small.
What a customer said
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager