Kent · Heat pump installation
Air Source Heat Pumps in Sepham Heath
Heat pump installation, for Sepham Heath and the surrounding area. Ask us for a fixed-price quote, and we will reply the same working day.
- Checking whether planning permission is needed
- Working out whether radiators need upsizing
- Choosing between air-to-water and air-to-air
How the job changes from property to property
Heat loss surveys
Without a proper survey, a heat pump can be too big or too small, and both cause problems.
Radiators and underfloor heating
Any radiator changes are set out in the quote, so the work is clear.
Air source heat pumps in Sepham Heath
Air-to-water heat pumps heat your hot water through a cylinder. If you have a combi boiler and no cylinder, the survey looks at where one could go. With air-to-air, hot water has to come from something else. If the problem is deciding on the outdoor unit position and not knowing whether a grant applies, we can sort it out.
In a place like Sepham Heath, some homes are listed, because permitted development doesn’t apply within the grounds of a listed building, so consent comes first.
Refrigerant work is written up in the F-Gas records: what was done, the refrigerant type and any amount added or recovered. Keep the records with the manual and the warranty documents, as a manufacturer or a future engineer may ask to see them.
- Place
- Sepham Heath (TN14)
- Region
- Kent
- Approvals
- F-Gas certified, NICEIC approved, MCS
- Replies
- Answered the same working day
- Price guide
- £8,000–£16,000 before the grant, 0% VAT on homes
- Quote
- Fixed-price quote after a site survey
- Call
- 07833 053749
- Checked
- 30 October 2026
Places near Sepham Heath
Other services in Sepham Heath
Looking after it afterwards
Every system needs looking after, and most of it is easy. Our tips:
- Clear leaves and debris from the outdoor unit
- Seal draughts where you can
- Don’t block radiators or indoor units with furniture
Where we applied for a Boiler Upgrade Scheme grant, we keep you informed through the process, as the installer applies for it.
Let the heat pump run steadily rather than switching it on and off, using the settings agreed at handover.
Your questions about air source heat pumps in Sepham Heath
Does the Boiler Upgrade Scheme cover homes in Sepham Heath?
Sepham Heath is covered, as the scheme runs across England and Wales. For an air-to-water heat pump the amount is £7,500; an air-to-air system can get £2,500 if it replaces the fossil-fuel heating outright, meets the home’s full heating demand and is not an add-on to a boiler. The installer applies, and we’re MCS certified.
Will you come out to Sepham Heath?
Yes, smaller places are covered as well as towns. We’re based in East Grinstead and plan each visit so the job can be finished in one trip where possible.
What’s the price of a heat pump installation?
For air-to-water, it’s £8,000–£16,000 (0% VAT on homes) before any Boiler Upgrade Scheme grant. Air-to-air prices are set after a survey, and we confirm the VAT on the quote.
Can I do any of the installation myself?
Not the refrigerant work. The F-gas rules require certified companies and qualified engineers for it, and a new circuit is notifiable under Part P unless a registered electrician, such as a NICEIC approved contractor, does it.
Which accreditations do you hold?
F-Gas certified, NICEIC approved and MCS certified for heat pumps, plus Checkatrade membership. Our engineers also hold the individual F-gas qualifications needed to work on refrigerant.
How quickly will you reply?
The same working day. After that, we agree a survey, diagnosis or installation date that suits you, and you get a fixed price before any work goes ahead.
Will skipping a service affect the warranty?
For some brands, yes. Send us the make and model and we will tell you what the manufacturer expects, and book the service at the interval they recommend.
The process
You don’t need to do much on the day. Just let us in and point us to the units, or to where they’ll be fitted, and the rest is down to us. Before we leave, the area is tidied and we explain what we’ve done. Photos of the existing unit help with repairs and servicing in Sepham Heath.
- It begins with your house and the heating it relies on now.
- We measure heat loss for every room.
- The design covers the heat pump, emitters, hot water and outdoor unit.
- Cost, grant and VAT appear on one fixed-price quote.
- We install, commission and register the system under MCS.
Getting ready for the visit
- Plan for pets to be kept clear during the visit
- Let us know where we can park and unload
- Mention any managing agent or landlord rules we need to follow
Getting a quote
Need a price for air source heat pumps? Please give us a ring on 07833 053749, or email if that’s easier and tell us about the job. We’ll talk you through the options and give you a fixed-price quote before anything is booked.
Read more
Air source heat pumps around Sepham Heath
At about 16 miles from central London, Sepham Heath sits inside the area we cover across London and the South East. Sepham Heath’s centre falls inside a designated conservation area. So the heat pump survey asks two extra questions here: is the home listed, and is it inside a conservation area?
Period properties close to Otford Lane Mission Church can suit a heat pump, though insulation and any heritage protection are checked first. If your home is listed, like Lullingstone Castle about 3.1 miles north-east, listed building consent comes before any heat pump work.
Sepham Heath is about 3 miles north-west of Sevenoaks, in Kent. Sepham Heath gets the same approach as every job we take on: a look at the job first, a fixed-price quote and written records at the end. In Kent alone we list 922 places and Sepham Heath is among them. There’s also a page for Bromley, about 8 miles away.
The closest recent job we can point to from Sepham Heath was on Station Road, Orpington (BR6), about 5 miles north-west: installing three Daikin cassette units in the main office area and a wall-mounted unit in the client meeting room.
Every address in TN14 is covered, from the main roads to the quietest streets. Other places close to Sepham Heath include Halstead (1 mile north-west), Twitton (1 mile south-east), Badgers Mount (1 mile north), Knockholt Pound (1 mile south-west) and Shoreham (1 mile north-east). Further out, we also cover Dartford (9 miles north), Sevenoaks (3 miles south-east), Royal Tunbridge Wells (14 miles south) and Gravesend (12 miles north-east).
Near you in Sepham Heath
Around Sepham Heath, our work takes us to homes and businesses near Crown Cottages The Rose And Crown Public House and Polhill Bank, among other places. Sepham Heath’s nearest station is Knockholt station, about 1.7 miles north-west. Nearby you’ll also find Lullingstone Castle (3.1 miles north-east) and Sevenoaks Hospital (3.1 miles south-east). Open spaces near Sepham Heath include Betsom's Hill and Dryhill Nature Reserve.
Before you call an engineer
Never try to top up, release or handle refrigerant yourself. The law requires anyone working on equipment containing F gas to hold the right qualifications, and the company to be certified, and escaping refrigerant can cause cold burns. If you suspect a leak, switch the system off and call us.
Owners can handle the everyday basics: keep the outdoor unit clear of leaves, plants and clutter, check the settings and the remote, and follow the cleaning the manual describes. Anything inside the units, the electrics and the refrigerant is engineer’s work.
From one of our customers
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead