Hampshire · Heat pump installation
Heat pump installers in Purbrook Heath
For heat pump installation in Purbrook Heath, one call is all it takes: diagnosis, fixed price, work and sign-off. An F-Gas certified company, NICEIC approved, on Checkatrade.
- Ageing boilers that will need replacing
- Questions about listed buildings or conservation areas
- Working out whether radiators need upsizing
How it works
On the day, we arrive at the time agreed with you and check the plan with you first. Floors and furniture near the work are covered with dust sheets, and anything electrical is made safe before work starts. On site, it takes from a couple of days to around a week, depending on the system and how much of the heating changes. Somewhere like Purbrook Heath, it helps to know about lanes, gates and where to park.
- First, a chat about the property and your goals for the heating.
- The survey checks heat loss, emitters, hot water and the outdoor unit position.
- We explain which type of heat pump suits the home and whether a grant could apply.
- Installation follows on the agreed dates.
- The job ends with commissioning, the MCS certificate and a walk through the controls.
How to prepare
- Give us access to the outside wall, roof or yard where the outdoor unit sits
- Keep pets and children away from the work area
- Clear a path to the units and the space around them
Get a fixed-price quote
For air source heat pumps in Purbrook Heath, ring us on 07833 053749, or email if that’s easier. Tell us what kind of property it is and what you’d like done, and send a few photos if you can. Enquiries get a reply the same working day.
Related advice
How we handle air source heat pumps in Purbrook Heath
Every installation starts with a heat loss survey. It shows how much heat each room needs on a cold day, so the heat pump and the radiators or indoor units can be sized properly. Guesswork leads to systems that are too big or too small. The work covers underfloor heating, hot water cylinders and homes heated by oil, LPG or gas, and people most often call us about questions about where the outdoor unit can go and moving away from fossil-fuel heating.
For a home around Purbrook Heath that is off mains gas and heated by oil or LPG, an extra £1,500 is available through the Boiler Upgrade Scheme until March 2027, on top of the £7,500.
Any work on the refrigerant circuit is recorded: what was done, the refrigerant type and any amount added or recovered. File them with the system’s paperwork, as a manufacturer or a future engineer may ask to see them.
- Place
- Purbrook Heath (PO7)
- Region
- Hampshire
- Enquiries
- We reply the same working day
- Pricing
- Fixed, in writing
- Typical price
- £8,000–£16,000 (0% VAT on homes), before the grant
- Accreditations
- NICEIC and F-Gas, MCS
- Call
- 07833 053749
- Updated
- 30 October 2026
Air source heat pumps in Purbrook Heath: the local picture
Purbrook Heath lies within about 2 miles of the sea. For a heat pump near the sea, ask about any coastal protection option the manufacturer offers. About 11 listed entries lie within half a mile of central Purbrook Heath, Purbrook Heath House (grade II) among them. That affects heat pumps: listed buildings need consent, and conservation areas limit where the outdoor unit can go under permitted development. Where needed, we check with the local planning authority (usually Havant council). VOA council tax data show about 30% of homes across Purbrook Heath and its surrounding area date from 1919 to 1939, and about 63% of households live in detached or semi-detached houses, according to Census 2021 figures. Whether the walls and loft have been insulated makes a real difference to the heat pump size for homes of that period. Houses usually have space for an outdoor unit and a hot water cylinder.
Warblington Castle lies about 4.2 miles east. Owners of listed homes need consent before a heat pump is fitted, so it’s one of our first questions. Period properties close to Church of St John can suit a heat pump, though insulation and any heritage protection are checked first.
Purbrook Heath is about 1 mile west of Purbrook, in Hampshire. Purbrook Heath gets the same approach as every job we take on: diagnosis first, a fixed price and proper paperwork when we’ve finished. In Hampshire alone we list 683 places and Purbrook Heath is among them. You can also see our page for Worthing, about 29 miles away.
The closest recent job we can point to from Purbrook Heath was on East Street, Chichester (PO19), about 12 miles east: installing a Daikin wall-mounted unit in the dining area and a second unit serving the kitchen pass area.
From Newlands Lane and Purbrook Heath Road to the smaller roads in between, nowhere is left out. Jobs in PO7 are looked at, quoted and booked the same way as anywhere else. Close by, we work in Widley (1 mile south), Purbrook (1 mile east), Waterlooville (1 mile north-east), Furzeley Corner (2 miles north) and Drayton (2 miles south). Further out, we also cover Gosport (6 miles south-west), Havant (3 miles east), Eastleigh (14 miles north-west) and Fareham (6 miles west).
Around Purbrook Heath
Around Purbrook Heath, our work takes us to homes and businesses near George Inn and Purbrook Park School, among other places. Purbrook Heath’s nearest station is Cosham station, about 1.9 miles south. Nearby you’ll also find Queen Alexandra Hospital (1.3 miles south-west) and Portchester Castle (3.4 miles south-west). The countryside around Purbrook Heath includes Southmoor Nature Reserve and Portsdown Hill.
Honest limits
It’s worth knowing the limits before booking:
- Tax advice on your own circumstances
- Disconnecting or servicing a gas boiler
- Draught-proofing and insulation upgrades
If in doubt, phone 07833 053749 and we’ll say what we think.
Where we work
- Air-to-water heat pumps
- Radiator systems
- Underfloor heating
- Hot water cylinders
- Homes heated by oil, LPG or gas
- Air-to-air heat pumps
Keeping the system healthy
Aftercare is straightforward, and it helps at the next service:
- Seal draughts where you can
- Read the manufacturer’s warranty terms for your brand
- Let the heat pump run steadily, as set up at handover
Now and then in cold weather, the outdoor unit defrosts itself. You might see steam or hear the unit change note, and that’s normal.
Keep radiators and indoor units unobstructed, as the system relies on them giving out heat.
Nearby places to Purbrook Heath
What else we do in Purbrook Heath
Rented and managed buildings
The F-gas rules share responsibility for leak checking between the equipment’s operator and the service technicians. Where a building is let or managed, the lease or contract should make clear who looks after the system, and we can work for either side.
Keeping records across a portfolio is half the battle. Each visit is written up, with F-Gas records wherever refrigerant work is involved, ready for a tenant, a buyer or an inspection.
Your questions about air source heat pumps in Purbrook Heath
Will you come out to Purbrook Heath?
We do. Villages and hamlets get the same service as the bigger towns. We’re based in East Grinstead and plan each visit so the job can be finished in one trip where possible.
Is the heat pump grant available in Purbrook Heath?
Yes, if the home and the heat pump meet the scheme’s rules: Purbrook Heath is in England, where it applies. It gives £7,500 towards an air-to-water or ground source heat pump, or £2,500 towards an air-to-air heat pump that replaces the fossil-fuel heating and meets the whole home’s heating need. The installer applies, and we’re MCS certified.
Is there a survey before the work?
Yes. For simple jobs, pictures and a few details can be enough, while bigger systems and repairs that need testing get a visit.
Who is responsible for leak checks?
Whoever operates the equipment, together with the technicians who service it. Systems below 5 tCO2e fall outside the set leak check intervals, while larger ones need checks at least every 12 months, or every 6 months from 50 tCO2e. We’ll work out which band applies to yours.
Do you protect the property while you work?
Floors and furniture near the work are covered with dust sheets before work begins, and we tidy up as we go. Before we leave, we clear up and run through the work with you.
Should I choose air-to-water or air-to-air?
Air-to-water suits homes with radiators and a cylinder; air-to-air suits rooms that need heating and cooling. The survey helps decide. Both are part of what we install.
Is the equipment covered by a warranty?
It’s the manufacturer’s, and the terms are theirs. Some terms depend on regular servicing by a qualified engineer, so keep your service records.
What a customer said
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager