Portsmouth · Heat pump installation

Heat pump installation in Milton, Portsmouth

We cover Milton for heat pump installation. Diagnosis first, a fixed price and proper paperwork when we finish.

  • Finding a place for the outdoor unit
  • Comparing heat pump types
  • An oil, LPG or gas boiler near the end of its life

Need air source heat pumps in Milton?

How we handle air source heat pumps in Milton

For an air-to-water heat pump, the price is £8,000–£16,000 (0% VAT on homes), before the grant. The Boiler Upgrade Scheme can provide £7,500 towards an eligible air-to-water system in England and Wales, and as the installer we apply for it on your behalf. Not every home qualifies, so we check eligibility before you commit. The work covers air-to-water heat pumps, homes heated by oil, LPG or gas and underfloor heating, and people most often call us about questions about listed buildings or conservation areas and a boiler that’s getting old.

If your home near Milton has no mains gas, the grant can be bigger. Until March 2027, homes on oil or LPG without mains gas can get an extra £1,500 through the Boiler Upgrade Scheme.

Some warranty terms depend on the system being serviced regularly by a qualified engineer. Where yours does, a regular service with us keeps that side in order and each visit is recorded.

Location
Milton (PO4, PO3, PO1)
Wider area
Portsmouth
Credentials
F-Gas certified company, NICEIC approved, MCS
Quote
A fixed price before we start
Guide price
£8,000–£16,000 (0% VAT on homes), before the grant
Call
07833 053749
Checked
30 October 2026

Homes in Milton and heat pumps

At about 1 mile from the coast, Milton is close enough for sea air to matter. Near the coast, we choose the outdoor unit position with salt-laden wind in mind. The Valuation Office Agency’s council tax figures put about 52% of homes across Milton and its surrounding area before 1919, and the last census (2021) found about 62% of households in terraced houses. Older homes can lose heat faster, so a room-by-room heat loss calculation, and sometimes insulation or larger radiators, comes before sizing a heat pump. In a terrace, the outdoor unit position and the MCS noise check need particular care.

Period properties close to Church of St James can suit a heat pump, though insulation and any heritage protection are checked first.

Milton is about 1 mile south-east of Portsmouth, in Portsmouth. Homes and businesses alike in Milton, our engineers can help with air source heat pumps. We reply to enquiries the same working day, and there’s a 24/7 emergency line. Our Portsmouth coverage runs to 19 places, and Milton is one of them. Our Worthing page covers places nearby (29 miles or so).

The closest recent job we can point to from Milton was on East Street, Chichester (PO19), about 13 miles east: installing a Daikin wall-mounted unit in the dining area and a second unit serving the kitchen pass area.

Postcode districts we cover here: PO4, PO3 and PO1. Local streets include Liss Road, Meon Road and Aston Road, each of them within reach. Places around Milton that are also on our list: Kingston (1 mile north-west), Fratton (1 mile north-west), Southsea (1 mile south-west), Baffins (1 mile north) and Copnor (1 mile north). Larger places within reach include Wymering (4 miles north), Paulsgrove (4 miles north), Cosham (3 miles north) and Drayton (4 miles north).

Near you in Milton

Around Milton, our work takes us to homes and businesses near The Milton Arms, Mary Rose School and St Edmund's Catholic School, among other places. Milton’s nearest station is Fratton station, about 0.6 miles west. Well-known places in the area include Eastney Beam Engine House (0.7 miles south-east) and St. Mary's Hospital (within half a mile north-west). Open spaces near Milton include Portsdown Hill and Milton Locks.

Map of Milton © OpenStreetMap contributors

After we’ve gone

Think of this as the after-treatment advice, short and simple:

  • Seal draughts where you can
  • Do not block radiators or indoor units with furniture
  • Avoid switching the heat pump on and off often

Once commissioned, we register the installation with MCS and give you the certificate. Keep it with the manufacturer’s paperwork for future reference.

Keep radiators and indoor units unobstructed so the heat can get into the room.

For landlords and property managers

We regularly work with managing agents. Tell us the property, the work and the access arrangements, and we will send a fixed-price quote.

From a single flat to a whole estate, you get the same standard: a look at the job first, a fixed-price quote, work booked with the occupier and written records afterwards.

Questions from Milton

Can I fit a heat pump in Milton without planning permission?

That depends on the building and where the outdoor unit goes. There’s a conservation area, the Essex Road Conservation Area, close to central Milton. Heat pumps on houses are often permitted development, but listed buildings need consent and conservation areas restrict outdoor units facing a road. Where it’s needed, we check with the planning department at Portsmouth council, usually the authority for Milton.

Will you come out to Milton?

Yes. Milton is within the area we cover across London and the South East. We are based in East Grinstead and plan each visit so the job can be finished in one trip where possible.

Can I do the refrigerant work myself?

The refrigerant side has to be done by a qualified engineer working for an F-Gas certified company. That is a legal requirement, and manufacturers expect it for their warranty too. We can quote for the whole job, from supply to commissioning.

Do I get paperwork after the visit?

Yes. You get a written record of every visit, including F-Gas records for any refrigerant work. Keep them with the manual and the warranty documents.

How long will it take to install a heat pump?

An installation takes a few days on site, depending on the cylinder, the radiators and the pipework involved. The survey lets us set a firm programme, and you can call 07833 053749, or email if that’s easier to book it.

How does the warranty work?

The manufacturer’s warranty, on the manufacturer’s terms. Terms differ by brand, and we set them out on your quote.

Can landlords and managing agents book you?

Yes. From a single let flat to offices, shops and public buildings, the approach is the same: a look first, a fixed-price quote and written records.

Signs you need air source heat pumps in Milton

A common reason is wanting to stop burning gas, oil or LPG. A heat pump runs on electricity and takes heat from the outside air, which is why it fits that aim.

Customers normally contact us when they notice something like this:

  • Deciding which kind of heat pump suits the home
  • Checking whether planning permission is needed
  • Deciding on the outdoor unit position

For a home near Fratton station, the survey looks at whether an air-to-water or air-to-air heat pump suits better.

What your quote should include

  • Whether a new circuit is included and who certifies it
  • What’s in the price and what is not
  • What happens if the job turns out to be different on the day

How to choose an air conditioning engineer

How it works

Protection comes first: sheets over the floor and any furniture nearby and nothing is moved without asking you. Then the electrics are made safe and the work begins. It takes from a couple of days to around a week, depending on the system and how much of the heating changes, and we clear up before we go. Send pictures of the space and the outside wall, and we can plan the work near Milton.

  1. You tell us about the home and what you want from a heat pump.
  2. A survey covers heat loss, radiators, hot water and where the outdoor unit could sit.
  3. You get our view on the right type for the house, and on whether the Boiler Upgrade Scheme applies.
  4. We install the heat pump and connect it up.
  5. After commissioning, you get the MCS certificate and a handover.

How to prepare

  • Make sure we can reach the outdoor unit, or where it will go
  • Keep pets out of the rooms we’re working in
  • Mention any managing agent or landlord rules we need to follow

Getting a price

Quoting starts with a diagnosis, either on a site survey or, for simple jobs, from your photos and details. Then you get a fixed price before any work starts.

Get a quick quote

Related advice

What a customer said

“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”

David W., Haywards Heath

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead