West Sussex · Heat pump installation
Air Source Heat Pumps in Kingston by Sea
Looking for air source heat pumps in Kingston by Sea? We look at the job first, give you a fixed-price quote and do the work at a time that suits you, finishing with proper records.
- Checking emitters for a heat pump
- Questions about the Boiler Upgrade Scheme
- Questions about listed buildings or conservation areas
Air source heat pumps for homes and businesses in Kingston by Sea
Air-to-water heat pumps heat your hot water through a cylinder. If you have a combi boiler and no cylinder, the survey looks at where one could go. Air-to-air systems do not heat hot water, so you’ll need another way to do that. The work covers hot water cylinders, underfloor heating and air-to-air heat pumps, and the jobs we see most are checking emitters for a heat pump and a boiler that’s getting old.
Homes around Kingston by Sea typically have space for an outdoor unit and a hot water cylinder, so heat loss, radiators and the electrics are what we check.
Any work on the refrigerant circuit is recorded: what was done, the refrigerant type and any amount added or recovered. File them with the system’s paperwork, as a manufacturer or a future engineer may ask to see them.
- Where
- Kingston by Sea (BN42, BN43)
- Region
- West Sussex
- Price
- A fixed price before we start
- Certified
- F-Gas certified, NICEIC approved, MCS
- Price guide
- Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
- Replies
- Same working day
- Call
- 07833 053749
- Updated
- 30 October 2026
When it’s something else
A few issues sit outside what this work can do:
- Planning decisions, which rest with the council
- Promising eligibility for the Boiler Upgrade Scheme
- Improving the building’s insulation
If in doubt, call 07833 053749 or fill in the contact form and we will say what we think.
Parts of the system we cover
- Homes heated by oil, LPG or gas
- Air-to-air heat pumps
- Underfloor heating
- Radiator systems
- Hot water cylinders
- Air-to-water heat pumps
After we’ve gone
Systems last better with the right care. Here’s what we suggest:
- Don’t block radiators or indoor units with furniture
- Find out the grant position at the survey
- Know the servicing conditions in your warranty
If you were eligible for a grant, we handle the application and keep you updated since the grant goes through the installer.
Heat pumps prefer steady, low-temperature running, using the settings agreed at handover.
What affects the cost of air source heat pumps
Typical ranges are on our prices page, but every job is priced on its own. The quote depends on:
- The type of system, from a single split to a larger system
- Which make and model is being fitted or worked on
- The number of rooms, units or zones
The cost depends on the system and the number of rooms or units, the access and the parts and time the job needs. You get a fixed price before any work starts, so you know where you stand.
What we need to know
When you contact us, it’s useful to have:
- The address and the type of property
- Photos showing the indoor unit and the space around it
- Where the outdoor unit is, or where you’d like it
Quoting starts with a diagnosis, either on a site survey or, for simple jobs, from your pictures and details. After that, we send a fixed price so you know the cost before we begin.
The process
If the system has to be off for part of the visit, we tell you before we start so it does not catch you out. In a business, work can often be done one area at a time. The work takes several days for an air-to-water system with a new cylinder, less for an air-to-air system. Visits to a place like Kingston by Sea are planned ahead, so we arrive with what the job needs.
- You tell us about the home and what you want from a heat pump.
- We survey for heat loss and look at radiators, cylinder space and outdoor unit options.
- We recommend air-to-water or air-to-air and check the grant position.
- The system is installed and connected to the controls.
- We commission it, complete the MCS certificate and show you how to use it.
How to prepare
- Plan for pets to be kept clear during the visit
- Clear a path to the units and the space around them
- Give us access to the outside wall, roof or yard where the outdoor unit sits
How to get a quote
Photos are enough for some jobs; others need a visit first. Bigger systems, commercial sites and awkward pipe routes are normally surveyed on site. Either way, you get a fixed price before any work is booked.
Advice
Heat pumps in Kingston by Sea: local notes
Kingston by Sea is within about 2 miles of the coast. For a heat pump near the sea, ask about any coastal protection option the manufacturer offers. VOA council tax data date about 42% of homes in the Kingston by Sea area to the post-war years, 1945 to 1972. Homes of that age often have cavity walls that may or may not be insulated, which the survey checks.
For a home near Southwick station, the survey looks at whether an air-to-water or air-to-air heat pump suits better. Live in one of the older houses around St Michael and All Angels Church? Expect the survey to look closely at heat loss and at the building’s planning status.
Kingston by Sea is about 1 mile east of Shoreham-by-Sea, in West Sussex. For air source heat pumps in and around Kingston by Sea, it’s easy to get a fixed-price quote: please ring 07833 053749 or fill in the contact form. Our area covers London and the South East, Kingston by Sea included. Our West Sussex coverage runs to 371 places, and Kingston by Sea is one of them.
The closest recent job we can point to from Kingston by Sea was on Middle Street, Shoreham-by-Sea (BN43), about 1 mile west: installing a marine-grade Mitsubishi Electric wall-mounted unit in the open-plan living area.
Our engineers work on Cross Road, Roman Road and Kings Road and the roads around them. Getting to Kingston by Sea is easy by the A270. We also cover Southwick (1 mile south-east), Portslade (1 mile east), Shoreham-by-Sea (1 mile west), Hangleton (2 miles east) and Old Shoreham (2 miles west). Larger places within reach include Worthing (7 miles west), Haywards Heath (13 miles north-east), Burgess Hill (9 miles north-east) and Littlehampton (13 miles west).
What’s near Kingston by Sea
Around Kingston by Sea, our work takes us to homes and businesses near Benfield Hill, Shoreham College and The Ship Inn, among other places. The nearest railway station is Southwick station, roughly 0.6 miles south of the centre. Other landmarks nearby include British Engineerium (2.8 miles east) and Southlands Hospital (0.7 miles west). For a walk, there’s Shoreham Beach and Thundersbarrow Hill.
Kingston by Sea questions
Will a heat pump in Kingston by Sea need planning permission?
The answer turns on the property and where the outdoor unit would sit. The half-mile around the middle of Kingston by Sea holds about 9 listed buildings and structures. A heat pump on a house can be permitted development if it meets the conditions, including the MCS noise check, but not within the grounds of a listed building, and in a conservation area the outdoor unit cannot face a road. Where necessary, we check with the local planning authority (for Kingston by Sea, typically Adur council).
Does the Boiler Upgrade Scheme cover homes in Kingston by Sea?
Kingston by Sea is covered, as the scheme runs across England and Wales. Air-to-water and ground source systems attract £7,500. Air-to-air gets £2,500, but only where it takes over from fossil-fuel heating and covers the whole home’s heating demand. As an MCS certified installer, we apply for it on your behalf.
Do you survey before quoting?
Yes. We always look before we price, either on a site survey or from photos and details for simple jobs. A fixed-price quote follows.
Is Kingston by Sea in your area?
Yes. Kingston by Sea is part of the area we cover, as part of our area across London and the South East. Our base is in East Grinstead, West Sussex.
Do I get paperwork after the visit?
Yes. Every visit is written up, including F-Gas records for any refrigerant work. File them with the system’s paperwork.
Are you F-Gas certified?
F-Gas certified, NICEIC approved and MCS certified for heat pumps, plus Checkatrade membership. Engineers who handle refrigerant hold their own F-gas qualifications as well.
Can you set up regular servicing?
Yes. Send details of the systems and how they’re used and we will propose a schedule and quote for it. Leak checks required by the F-gas rules can be built in for larger systems.
Places near Kingston by Sea
More services for Kingston by Sea
What a customer said
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager