Hampshire · Heat pump installation
Heat pump installers in Kingsmead
Air source heat pumps for Kingsmead, from F-Gas certified engineers, with the manufacturer’s warranty terms explained on your quote. Enquiries answered the same working day.
- Not knowing whether a grant applies
- Questions about where the outdoor unit can go
- Wanting to stop using oil, LPG or gas for heating
Questions from Kingsmead
Can you do air source heat pumps in Kingsmead?
Yes. We work across London and the South East from our base in East Grinstead, and Kingsmead is part of that. Tell us a little about the job and we will take it from there.
Is Kingsmead within the area you cover?
We do. Villages and hamlets get the same service as the bigger towns. Send a few details and photos, and we reply the same working day.
What’s the price of a heat pump installation?
Air-to-water systems are £8,000–£16,000 (0% VAT on homes), before any grant. Your price depends on the survey, the emitters and the hot water and the quote is fixed.
Why use an F-Gas certified company?
Anyone installing, repairing or servicing the refrigerant side must be qualified, and their company certified. It’s worth checking before you book, and we are happy to show ours.
What warranty do I get?
The manufacturer provides it, on its own terms. Some terms depend on regular servicing by a qualified engineer, so keep your service records.
Is a heat pump permitted development?
Under the Planning Portal rules, a heat pump on a house can often be permitted development. Listed buildings are excluded, and listed building consent is separate, so we check for your property.
Am I eligible for a heat pump grant?
We check the scheme rules for your property before you go ahead. The installer applies for the grant, so we handle the application if you’re eligible.
Air source heat pumps for homes and businesses in Kingsmead
Heat pumps run at lower flow temperatures than most boilers which means some radiators may need upsizing. We check each radiator against the room’s heat loss, and the quote sets it out. The work covers hot water cylinders, homes heated by oil, LPG or gas and air-to-air heat pumps, and people most often call us about replacing a combi boiler with a heat pump and ageing boilers that will need replacing.
If your home in or near Kingsmead is heated by oil, LPG or electric heaters with no mains gas, an extra £1,500 is available through the Boiler Upgrade Scheme until March 2027, on top of the £7,500.
AirCon Doctor is an F-Gas certified company and NICEIC approved for electrical work, MCS certified for heat pumps and a Checkatrade member. Our engineers hold the F-gas qualifications needed to work on refrigerant.
- Place
- Kingsmead (PO17)
- Region
- Hampshire
- Quote
- Fixed after a survey or photos
- Replies
- On the working day you ask
- Credentials
- F-Gas certified company, NICEIC approved, MCS
- Guide price
- £8,000–£16,000 before the grant, 0% VAT on homes
- Telephone
- 07833 053749
- Page updated
- 30 October 2026
Towns and villages near Kingsmead
Also in Kingsmead
What a heat pump looks like in Kingsmead
Kingsmead is about 61 miles from central London, well within the area we cover from our base in East Grinstead. About 83% of households live in detached or semi-detached houses, according to the last census (2021). Houses typically have space for an outdoor unit and a hot water cylinder.
Grant applications go through the MCS certified installer, so that part is handled for you. Sizing comes from the heat each room loses on a cold day, not from the size of the old boiler.
Kingsmead is about 5 miles north of Fareham, in Hampshire. Our engineers cover Kingsmead for air source heat pumps and across the rest of Hampshire. Our Hampshire coverage runs to 683 places, and Kingsmead is one of them. We also work in Worthing, around 34 miles away.
Our working area takes in PO17 in full. Neighbouring places we cover include Woodend (1 mile east), Mislingford (1 mile north), Shirrell Heath (1 mile west), Soberton Heath (1 mile east) and Shedfield (1 mile west). Within a short drive, we also cover Winchester (12 miles north-west), Gosport (8 miles south), Havant (9 miles south-east) and Eastleigh (8 miles north-west).
Landmarks near Kingsmead
Around Kingsmead, our work takes us to homes and businesses near The Roebuck pub, among other places. The closest station to Kingsmead is Botley station, about 4 miles west of the centre. A little further out are Bishop's Waltham Museum (3.2 miles north-west) and Knowle Hospital (3.1 miles south-west). For a walk, there’s Portsdown Hill and St Clair's Meadow.
Landlords, agents and facilities managers
Managing agents often deal with us directly. Send the address, what’s needed and how access works, and we’ll send a fixed-price quote.
Keeping records across a portfolio is half the battle. Each visit produces a dated record, with F-Gas records wherever refrigerant work is involved, ready for a tenant, a buyer or an inspection.
Fixed-price quotes for air source heat pumps in Kingsmead
The survey or diagnosis tells us what the work involves. We look at:
- One-off work versus a regular service cycle
- The equipment or parts the job needs
- What kind of system it is
The price reflects the work, not guesswork. That’s why we look at the job first, from pictures or on a survey, and the price is agreed before any work starts.
Helping us quote
Good pictures often save a visit. The most useful are:
- Your installation or service records
- The rating plate or label on any existing unit
- The outdoor side of the property, including any roof or flat area
Quoting starts with a diagnosis, either on a site survey or, for simple jobs, from your pictures and details. Then you get a fixed price before any work starts.
Why act early in Kingsmead
Radiators that are too small for a heat pump’s lower flow temperature leave rooms cool. Checking and upsizing them as part of the installation avoids that. Dealing with it now is normally simpler than a breakdown later.
Leaving a fault or an overdue service rarely makes the work cheaper. Faults and wear in a system tend to grow, and a struggling system uses more electricity to do less. If you are not sure what’s needed, phone 07833 053749 or drop us a line for straight advice and a fixed price.
Why people in Kingsmead choose us
- Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba and more
- Listed on Checkatrade
- Clear warranty information from the manufacturer
- MCS certified heat pump installers
See what air conditioning costs and how to check a contractor.
What happens on the day
Wherever the system can be run before we leave, we run it and check it in operation. Then we explain what was done and answer your questions, and anything that needs a follow-up is pointed out there and then. All told, the work takes from a couple of days to around a week, depending on the system and how much of the heating changes. Photos of the existing unit help with repairs and servicing in Kingsmead.
- We start with your plans and the property.
- The survey checks heat loss, emitters, hot water and the outdoor unit position.
- You get our view on the right type for the house, and on whether the Boiler Upgrade Scheme applies.
- Installation follows on the agreed dates.
- We commission it, complete the MCS certificate and show you how to use it.
Preparing for the visit
- Give us access to the outside wall, roof or yard where the outdoor unit sits
- Let us know where the consumer unit is
- Let us know if the units are on a roof, a high wall or in a locked area
How to get a quote
Getting a quote is straightforward. Call or email with a few details and we’ll come back to you the same working day. Where a survey is needed, we arrange a time that suits you.
Read more
A customer’s words
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead