Kent · Heat pump installation
Ide Hill air source heat pumps
Air source heat pumps across Ide Hill and nearby, from the first look to the final check and a fixed price agreed before work begins.
- Deciding which kind of heat pump suits the home
- Finding a place for the outdoor unit
- Ageing boilers that will need replacing
How we price air source heat pumps
Before we fix a price, we need to know a few things. We look at:
- The number of rooms, units or zones
- The brand, model and parts involved
- Whether we need access equipment for high-level work
Leaving a fault or an overdue service rarely makes the work cheaper. Small problems, from blocked filters to slow leaks, tend to get worse, and a system working harder than it should costs more to run. If you are unsure, call 07833 053749, or email if that’s easier for straight advice and a fixed price.
What we need to know
What to send for a quote:
- The outdoor side of the property, including any roof or flat area
- A photo of the consumer unit with the cover closed
- Photos showing the indoor unit and the space around it
If you need air source heat pumps in Ide Hill, phone us on 07833 053749 or write to us at info@aircondoctor.co.uk. Tell us what kind of property it is and what you’d like done, plus some pictures if they’re to hand. We reply the same working day.
Air source heat pumps in Ide Hill, done properly
A £2,500 grant is available for some air-to-air heat pumps, with conditions. The system must replace the existing fossil-fuel heating and meet the home’s full heating demand, it must be installed by an MCS certified installer, and it must be in a home, so an add-on next to a boiler is not eligible. The work covers hot water cylinders, radiator systems and air-to-water heat pumps, and common reasons people get in touch are checking whether planning permission is needed and working out where a cylinder could go.
In a place like Ide Hill, some homes are listed, because permitted development does not apply within the grounds of a listed building, so consent comes first.
We are an F-Gas certified company, NICEIC approved for electrical work, MCS certified for heat pumps and a Checkatrade member. Our engineers hold the F-gas qualifications needed to work on refrigerant.
- Location
- Ide Hill (TN14)
- Region
- Kent
- Guide price
- Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
- Quotes
- Fixed, in writing
- Credentials
- F-Gas certified company, NICEIC approved, MCS
- Telephone
- 07833 053749
- Checked
- 30 October 2026
When it’s something else
We won’t sell you work that doesn’t address the problem, so here are the limits:
- Getting planning permission or listed building consent on your behalf
- Grants for hybrid systems or replacements of low-carbon systems
- Gas boiler work, such as disconnecting the old boiler, which needs a Gas Safe registered engineer
If in doubt, phone us on 07833 053749 or email us and we will say what we think before you book.
Parts of the system we cover
- Air-to-water heat pumps
- Homes heated by oil, LPG or gas
- Hot water cylinders
- Air-to-air heat pumps
- Underfloor heating
- Radiator systems
Ide Hill questions
Will a heat pump in Ide Hill need planning permission?
The answer turns on the property and where the outdoor unit would sit. The centre of Ide Hill is in a conservation area. The permitted development rules for heat pumps leave out listed buildings and stop outdoor units going on road-facing walls or roofs in conservation areas. Anything outside the rules needs an application, and we raise it with the planning department at Sevenoaks council, normally the authority for Ide Hill first.
Can I get the Boiler Upgrade Scheme grant in Ide Hill?
Yes, the scheme covers homes in England, including Ide Hill, if they qualify. It gives £7,500 towards an air-to-water or ground source heat pump, or £2,500 towards an air-to-air heat pump that replaces the fossil-fuel heating and meets the whole home’s heating need. The installer applies, and we are MCS certified.
Can we book visits on a schedule?
Yes. We offer maintenance contracts, with visits at the interval your system and the manufacturer need. Each visit is written up and F-Gas records kept where they apply.
Who is responsible for leak checks?
Responsibility is shared between the operator, usually whoever owns or controls the equipment, and the service technicians. How often depends on the size of the refrigerant charge in tonnes of CO2 equivalent: at least every 12 months from 5 tCO2e, and every 6 months from 50 tCO2e.
Are you F-Gas certified?
F-Gas certified, NICEIC approved and MCS certified for heat pumps, and we are Checkatrade members. Engineers who handle refrigerant hold their own F-gas qualifications as well.
Do you offer emergency call-outs?
Yes, any time. For anything urgent, such as a system failing in a server room or water leaking from a unit, ring our 24/7 line and we will agree what happens next.
Do you provide F-Gas records?
Yes. It’s the record a manufacturer or the next engineer will ask to see: a dated note of the work, with refrigerant details where they apply.
After we have gone
Every system needs looking after, and most of it is easy. Our tips:
- Book a yearly service
- Use the settings explained at handover
- Store the MCS certificate and warranty documents together
The warranty on the heat pump is the manufacturer’s, on its own terms. We explain the terms for your brand, including any servicing conditions.
Leave space around the outdoor unit. Airflow is what it runs on, so keep it clear all year.
Air source heat pumps in Ide Hill: the local picture
Valuation Office Agency council tax records put about 40% of homes across Ide Hill and its surrounding area before 1919, and about 64% of households live in detached or semi-detached houses, according to Census 2021 figures. Older homes can lose heat faster, so a room-by-room heat loss calculation, and sometimes insulation or larger radiators, comes before sizing a heat pump. Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these.
If your home is one of the older properties near Church of St Mary at South End of Village Green, the survey checks whether it’s listed or in a conservation area before the outdoor unit position is chosen. Historic houses such as Chartwell, about 2.1 miles west, are a reminder that listed homes need consent before a heat pump goes in.
Ide Hill is about 3 miles south-west of Sevenoaks, in Kent. If you need air source heat pumps in Ide Hill, it’s easy to get a fixed-price quote: please call 07833 053749. Our area covers London and the South East, including Ide Hill. Our Kent coverage runs to 922 places, and Ide Hill is one of them. There’s also a page for East Grinstead, roughly 10 miles from Ide Hill.
Not far from Ide Hill, a recent job of ours was on Granville Road, Oxted (RH8), about 6 miles west: installing a Mitsubishi Electric wall-mounted unit in the home gym and a second unit in the master bedroom.
Streets in the area include Hanging Bank and Camberwell Lane, all of which are in our area. If your postcode is in TN14, you’re inside the area we cover. Close by, we work in Goathurst Common (1 mile north-east), Toy's Hill (1 mile west), Brasted Chart (2 miles north-west), Sundridge (2 miles north) and Brasted (2 miles north-west). Larger places within reach include Dartford (14 miles north), Sevenoaks (3 miles north-east), Royal Tunbridge Wells (10 miles south-east) and Tonbridge (7 miles south-east).
Around Ide Hill
We fit and service air conditioning in homes and premises around Stubbs Wood Country Park and The Cock Inn, among other places. The nearest railway station is Sevenoaks station, about 3.1 miles north-east. A little further out are Sevenoaks Museum (3.3 miles north-east) and Sevenoaks Hospital (4.1 miles north-east). The countryside around Ide Hill includes Dryhill Nature Reserve and Betsom's Hill.
How the visit works
You do not need to do much on the day. Someone needs to let us in and show us the units, or where they’re going, and we take it from there. Before we leave, the area is tidied and we explain what we have done. Pictures of the space and where the outdoor unit could go let us plan the work in Ide Hill.
- Step one is understanding the house, how it’s heated today and what you’d like to change.
- On the visit we calculate what every room loses on a cold day, then check the radiators, room for a cylinder and outdoor unit options.
- The price comes back fixed and in writing, with the grant and VAT shown line by line.
- Fitting day: the outdoor unit is placed, the indoor side connected and the controls set up.
- The system is commissioned and registered under MCS, and we show you how to use it.
Preparing for the visit
- Plan for pets to be kept clear during the visit
- Have the make and model of any existing unit to hand
- Make sure we can reach the consumer unit or fuse board
Get a fixed-price quote
Some jobs can be priced from pictures, while others need a survey. Multi-room systems, commercial buildings and anything with a long or hidden pipe route are normally surveyed first. Either way, the quote is fixed before anything goes ahead.
Advice
Towns and villages near Ide Hill
More services for Ide Hill
What a customer said
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager