Kent · Heat pump installation
Heat pump installation in Hale Street, Kent
Looking for air source heat pumps in Hale Street? We diagnose first, fix the price and book the work around you, finishing with proper records.
- Finding a place for the outdoor unit
- No space for a hot water cylinder
- Checking eligibility for a heat pump grant
How the visit works
Wherever the system can be run before we leave, we run it and check it in operation. Then we show you what we have done and answer any questions, and anything that needs attention later is pointed out. All told, the work takes a few days for most air-to-water installations, with air-to-air systems often quicker. If a lane or gateway near Hale Street is tight for a van, let us know and we will plan for it.
- We start with your plans and the property.
- We survey for heat loss and look at radiators, cylinder space and outdoor unit options.
- We recommend air-to-water or air-to-air and check the grant position.
- Installation follows on the agreed dates.
- The job ends with commissioning, the MCS certificate and a walk through the controls.
Getting ready for the visit
- Find the manual or the paperwork for the system, if you have it
- Plan for pets to be kept clear during the visit
- Make sure someone can let us in at the agreed time
Get a fixed-price quote
Some jobs can be priced from pictures, while others need a survey. Bigger systems, commercial sites and awkward pipe routes are normally surveyed on site. Either way, you get a fixed price before any work is booked.
Related advice
How we handle air source heat pumps in Hale Street
Air-to-air heat pumps can qualify for a £2,500 Boiler Upgrade Scheme grant, but only in some cases. The system must replace the existing fossil-fuel heating and meet the home’s full heating demand, it must be installed by an MCS certified installer, and it must be in a home, so an add-on next to a boiler is not eligible. We are often asked to deal with moving away from fossil-fuel heating and ageing boilers that will need replacing, on homes heated by oil, LPG or gas, radiator systems and hot water cylinders.
If your home in or near Hale Street is heated by oil, LPG or electric heaters with no mains gas, the Boiler Upgrade Scheme adds an extra £1,500 until March 2027 for an air source or ground source heat pump.
Warranty periods vary by brand and by product. For instance, Daikin’s standard warranty on split air conditioning is 2 years, and its longer extensions apply to its air-to-water units only. For any other brand, we explain the manufacturer’s terms on your quote.
- Location
- Hale Street (TN12)
- Region
- Kent
- Pricing
- A fixed price before we start
- Typical price
- £8,000–£16,000 before the grant, 0% VAT on homes
- Credentials
- NICEIC approved, F-Gas certified, MCS
- Response
- Answered the same working day
- Call
- 07833 053749
- Last updated
- 30 October 2026
What air conditioning won’t do
We will always give you a straight diagnosis, so here’s what this work cannot put right:
- Planning approval where permitted development does not apply
- A grant for a home that doesn’t meet the scheme rules
- Disconnecting or servicing a gas boiler
If you’re not sure, just phone us on 07833 053749 or drop us a line and we will give you a straight answer.
Parts of the system we cover
- Air-to-water heat pumps
- Radiator systems
- Homes heated by oil, LPG or gas
- Air-to-air heat pumps
- Underfloor heating
- Hot water cylinders
What we are called out for in Hale Street
Many people look at heat pumps when an oil, LPG or gas boiler is getting old. Starting early leaves time for the survey, the design and any grant application, rather than rushing a replacement in winter.
Most people get in touch when they notice one of these:
- A boiler that’s getting old
- Checking emitters for a heat pump
- Comparing heat pump types
Old Soar Manor lies about 4.4 miles north-west. Owners of listed homes need consent before a heat pump is fitted, so it’s one of our first questions.
Comparing quotes
- Whether the company is F-Gas certified, and whether you can check it
- The make and model of any parts or equipment being quoted
- Whether the electrical work is done by a registered contractor, such as NICEIC approved
Looking after your system
After the visit, a few habits help:
- Keep the MCS certificate with the manufacturer’s paperwork
- Avoid switching the heat pump on and off often
- Keep up with insulation and draught-proofing
Should you have questions after the install, ring us on 07833 053749 or fill in the contact form and we’ll talk it through. Annual servicing helps keep the system working well.
Have the system serviced regularly. Check the manufacturer’s terms, as they may include servicing conditions.
Hale Street: your questions answered
Do you cover smaller places like Hale Street?
Yes, and the size of the place makes no difference to how we work. A few photos and the postcode are enough to get things started.
Does the Boiler Upgrade Scheme cover homes in Hale Street?
Hale Street is in England, where the Boiler Upgrade Scheme runs. Whether your home qualifies, and for how much, depends on the type of heat pump and the heating it replaces. The installer applies, and we’re MCS certified.
How much time does a heat pump install need?
An installation takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. We confirm the timing after the survey, so call us on 07833 053749 or write to us at info@aircondoctor.co.uk to arrange one.
What’s the price of a heat pump installation?
For air-to-water, the price is £8,000–£16,000 (0% VAT on homes) before any grant. The Boiler Upgrade Scheme offers £7,500 to eligible homes in England and Wales, and we confirm eligibility before you commit.
Do I need planning permission for a heat pump?
Often not in England, as many heat pumps on houses are permitted development provided the conditions are met. The outdoor unit must be 1.5 m³ or less, comply with MCS 020(a), not be cooling-only and not be within a listed building’s curtilage.
How quickly will you reply?
We reply to enquiries the same working day. For a breakdown that cannot wait, call our 24/7 emergency line.
Do you work on systems someone else installed?
Yes. We look at it first and tell you what we find, including anything about the original installation that needs putting right. Any work is priced before it goes ahead.
Also near Hale Street
What else we do in Hale Street
Heat pumps in Hale Street: local notes
About 19 listed entries lie within half a mile of central Hale Street, Fant Farmhouse (grade II) among them. That affects heat pumps: listed buildings need consent, and conservation areas limit where the outdoor unit can go under permitted development. Where necessary, we check with the local planning authority (usually Tonbridge and Malling council). About 71% of households live in detached or semi-detached houses, according to Census 2021 figures. Detached and semi-detached houses normally have room for the outdoor unit and a cylinder.
If your home is near Yalding station and heated by a gas boiler, an air-to-water heat pump can replace it where the survey shows it suits.
Hale Street is about 5 miles east of Tonbridge, in Kent. We cover Hale Street for air source heat pumps, along with the rest of Kent. Our Kent coverage runs to 922 places, and Hale Street is one of them. East Grinstead, roughly 19 miles off, has its own page on this site.
Work in TN12 follows the same survey, fixed-price quote and written records as everywhere else we cover. You will find streets such as Hale Court, Hale Street and Pattenden Gardens, all of which are in our area. If you’re just outside Hale Street, we cover Branbridges (1 mile south), East Peckham (1 mile south-west), Peckham Bush (1 mile north-west), Snoll Hatch (1 mile south-west) and Beltring (1 mile south). We also work in nearby towns such as Maidstone (7 miles north-east), Sevenoaks (10 miles north-west), Royal Tunbridge Wells (8 miles south-west) and Gravesend (15 miles north).
Around Hale Street
We fit and service air conditioning in homes and premises around The Harp pub and the streets around them. The closest station to Hale Street is Yalding station, about 0.9 miles north-east. Well-known places in the area include Teapot Island (1 mile east) and Oakwood Hospital (5.2 miles north-east).
What a customer said
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead