West Sussex · Heat pump installation

Ferring air source heat pumps

Air source heat pumps in and around Ferring, from a site survey or diagnosis to sign-off and a fixed price agreed before work begins.

  • Ageing boilers that will need replacing
  • Plans to switch to electric heating with a heat pump
  • Finding a place for the outdoor unit

Air source heat pumps in Ferring

What a heat pump looks like in Ferring

Ferring lies within about 1 mile of the sea. For a heat pump near the sea, ask about any coastal protection option the manufacturer offers. About 53% of homes in the Ferring area date from 1945 to 1972, according to the Valuation Office Agency’s council tax figures, and the 2021 Census found about 88% of households in detached or semi-detached houses. Whether the walls and loft have been insulated makes a real difference to the heat pump size for homes of that period. Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these.

If your home is near Goring-By-Sea station and heated by a gas boiler, an air-to-water heat pump can replace it where the survey shows it suits. Historic houses such as Ecclesden Manor, about 1.6 miles north-west, are a reminder that listed homes need consent before a heat pump goes in.

Ferring is about 2 miles south-west of Worthing, in West Sussex. For air source heat pumps in and around Ferring, please ring us on 07833 053749 or drop us a line for a fixed-price quote. Our area covers London and the South East, Ferring included. Across West Sussex, we cover 371 places, and Ferring is one of them.

Our nearest recent job to Ferring was on Marine Parade, Worthing (BN11), about 2 miles north-east: installing a Samsung wall-mounted unit in the main living area.

Our engineers work on Pebble Lane, Ferringham Lane and Grange Park and the roads around them. Work in BN12 follows the same survey, fixed-price quote and written records as everywhere else we cover. Neighbouring places we cover include Kingston Gorse (1 mile south-west), Hangleton (1 mile north-west), West Kingston (1 mile west), Goring-by-Sea (1 mile east) and Angmering-on-Sea (1 mile west). Within a short drive, we also cover Bognor Regis (10 miles west), Chichester (15 miles west), Littlehampton (4 miles west) and Shoreham-by-Sea (8 miles east).

Local landmarks in Ferring

In Ferring, that means homes and buildings near Durrington Minature Railway and Chatsmore Catholic High School, among other places. The closest station to Ferring is Goring-By-Sea station, about 0.9 miles north-east. Well-known places in the area include Rustington Museum (2.4 miles west) and Old Castle (2.6 miles north-east). Green spaces nearby include Highdown Hill.

Map of Ferring © OpenStreetMap contributors

Air source heat pumps in Ferring, done properly

A £2,500 grant is available for some air-to-air heat pumps, with conditions. The system must replace the existing fossil-fuel heating and meet the home’s full heating demand, it must be installed by an MCS certified installer, and it must be in a home; adding it alongside a boiler does not qualify. We are often asked to deal with working out where a cylinder could go and choosing between air-to-water and air-to-air, across underfloor heating, hot water cylinders and air-to-water heat pumps.

Older homes around Ferring can be draughty or have solid walls, which a heat loss calculation will show. Sometimes insulating first makes more sense.

Think of the paperwork as the system’s health record: what was fitted or found, what was done and when. If anything goes wrong later, it helps the next engineer and the manufacturer and it’s worth keeping safe.

Where
Ferring (BN12)
Wider area
West Sussex
Quote
A fixed-price quote up front
Certified
F-Gas certified, NICEIC approved, MCS
Guide price
£8,000–£16,000 (0% VAT on homes), before the grant
Telephone
07833 053749
Updated
30 October 2026

Different systems, different jobs

Hot water cylinders

The cylinder size depends on how much hot water the household uses.

Radiators and underfloor heating

Underfloor heating works well with heat pumps because it uses lower temperatures and we look at it during the survey.

What happens on the day

The visit has three parts, a bit like a doctor’s appointment: look, put right and sign off. First comes a careful look at the system or the space, then the work itself, and finally we test, record and explain. Most of the time goes on the middle part, which takes from a couple of days to around a week, depending on the system and how much of the heating changes. Around Ferring, access is normally simple, though gates and garden access are worth mentioning.

  1. First we talk through the property and the current system.
  2. Every room’s heat loss is worked out on site.
  3. The design covers the heat pump, emitters, hot water and outdoor unit.
  4. A fixed-price quote explains the cost, the grant position and the VAT.
  5. Installation, commissioning and MCS registration complete the job.

Getting ready for the visit

  • Move furniture away from the wall where we will be working
  • Plan for pets to be kept clear during the visit
  • Dig out any previous service or F-Gas records

How to get a quote

Published ranges are a starting point; the quote is built on your property, because no two buildings, rooms or systems are the same. After a look at the job, by photos or a survey, the price is fixed. To start, phone 07833 053749 or fill in the contact form.

Ask for a quote

Related advice

Ferring questions

Will a heat pump in Ferring need planning permission?

That depends on the building and where the outdoor unit goes. The Ferring Conservation Area is close to the centre of Ferring. A heat pump on a house can be permitted development if it meets the conditions, including the MCS noise check, but not within the grounds of a listed building, and in a conservation area the outdoor unit cannot face a road. Where needed, we check with the planning department at Arun council, usually the authority for Ferring.

Does the Boiler Upgrade Scheme cover homes in Ferring?

Ferring is in England, where the Boiler Upgrade Scheme runs. Air-to-water and ground source systems attract £7,500. Air-to-air gets £2,500, but only where it takes over from fossil-fuel heating and covers the whole home’s heating demand. As an MCS certified installer, we apply for it on your behalf.

Do you look at the job first?

Yes. Photos often do the job for simple work, while larger systems and faults that need testing are seen on site.

When will I hear back?

On the same working day you contact us. After that, we agree a survey, diagnosis or installation date that suits you, and you get a fixed price before any work goes ahead.

Which brands do you work with?

We work with the leading brands, from Mitsubishi Electric, Daikin and Fujitsu to Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries and Hitachi. Send us the make and model if you have it.

How much does an air source heat pump cost?

Expect £8,000–£16,000 for an air-to-water system, with 0% VAT on homes, before the grant is taken off. The heat pump size, radiator changes and the cylinder decide where in that range you are, and air-to-air systems are priced after a survey.

Can you come out in an emergency?

Yes. Our emergency line runs 24/7 for breakdowns that cannot wait. Ring 07833 053749 any time and explain the problem.

Safe owner checks

Good habits make our visits easier, not unnecessary. Clean filters and a clear outdoor unit help the system run as it should, but the refrigerant circuit, the electrics and the parts you can’t see still need an engineer at the interval the manufacturer recommends.

Before you call us about a fault, a few checks can save a visit: is the system in the right mode, is the set temperature sensible, are the remote’s batteries working and has the breaker tripped. If the breaker trips a second time, leave it off and phone 07833 053749 or fill in the contact form.

Aftercare tips

To keep the system working properly:

  • Know the servicing conditions in your warranty
  • Avoid switching the heat pump on and off often
  • Keep the outdoor unit clear all year

If you were eligible for a grant, we handle the application and keep you updated, as the installer applies for it.

Keep the outdoor unit clear of leaves, plants and stored items. It needs good airflow to collect heat from outside so keep it unobstructed.

What a customer said

“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”

David W., Haywards Heath

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead