Buckinghamshire · Heat pump installation

Danesfield air source heat pumps

Need air source heat pumps in Danesfield? We diagnose first, fix the price and book the work around you, finishing with proper records.

  • Comparing heat pump types
  • Plans to switch to electric heating with a heat pump
  • Working out where a cylinder could go

Air source heat pumps near Danesfield

Air source heat pumps in Danesfield

An air-to-water heat pump heats water to a lower temperature than a typical boiler which means some radiators may need upsizing. We check each radiator against the room’s heat loss and anything that needs changing is in the quote. If the problem is questions about listed buildings or conservation areas and a boiler that’s getting old, we can help.

In a place like Danesfield, some homes are listed, and permitted development does not cover listed buildings, so consent comes first.

Aftercare is simple, and most of it is in the manual: keep the outdoor unit clear, follow the manufacturer’s guidance on cleaning and book a service at the interval they recommend. That also helps where the warranty terms ask for regular servicing.

Place
Danesfield (SL7)
Region
Buckinghamshire
Credentials
NICEIC and F-Gas, MCS
Typical price
£8,000–£16,000 before the grant, 0% VAT on homes
Quote
Fixed-price quote after a site survey
Phone
07833 053749
Page updated
30 October 2026

After we’ve gone

Looking after the system is mostly common sense. A few tips:

  • Diary the next service
  • Check what your manufacturer’s warranty asks of you
  • Avoid switching the heat pump on and off often

We show you how to use the controls and explain how a heat pump works differently from a boiler. Heat pumps tend to work best running steadily rather than in short bursts so we set the controls up with you.

Have the system serviced regularly. Check the manufacturer’s terms, as they may include servicing conditions.

What we do, step by step

On the day, we arrive at the time agreed with you and run through the plan before anything else. Floors and furniture near the work are covered with dust sheets, and anything electrical is made safe before work starts. On site, it takes a few days on site, depending on the cylinder, the radiators and the pipework involved. If a lane or gateway near Danesfield is tight for a van, let us know and we will plan for it.

  1. It starts with a conversation about the home, the existing heating and your plans.
  2. On the visit we calculate what every room loses on a cold day, then check the radiators, room for a cylinder and outdoor unit options.
  3. A fixed-price quote follows, setting out the system, any grant that applies and the VAT.
  4. Fitting day: the outdoor unit is placed, the indoor side connected and the controls set up.
  5. Once it’s running correctly, the MCS certificate is issued and we show you the settings.

How to prepare

  • Make sure we can reach the consumer unit or fuse board
  • Let us know if the building has a permit or sign-in process
  • Arrange for someone to be there to let us in

Getting a price

Quoting starts with a diagnosis, either on a site survey or, for simple jobs, from your photos and details. Then you get a fixed price before any work starts.

Get a price

Advice

Homes in Danesfield and heat pumps

About 42% of homes across Danesfield and its surrounding area date from 1945 to 1972, according to VOA council tax data. Whether the walls and loft have been insulated makes a real difference to the heat pump size for homes of that period.

If your home is listed, like Harleyford Manor about 0.6 miles south-east, listed building consent comes before any heat pump work.

Danesfield is about 2 miles south-west of Marlow, in Buckinghamshire. If you need air source heat pumps in Danesfield, it’s easy to get a fixed-price quote: please call 07833 053749 or write to us at info@aircondoctor.co.uk. Our area covers London and the South East, Danesfield included. Danesfield is one of 263 places in Buckinghamshire we cover. Our Guildford page covers places nearby (24 miles or so).

Our engineers work on Kings Wood, Thames Reach and Chestnut Close and nearby roads. Jobs in SL7 are looked at, quoted and booked the same way as anywhere else. We also cover the places around Danesfield: Bockmer End (1 mile north-west), Medmenham (1 mile west), Frogmill (1 mile south), Hurley (1 mile south-east) and Marlow Common (1 mile north). Within a short drive, we also cover High Wycombe (6 miles north-east), Chesham (14 miles north-east), Amersham (13 miles north-east) and Beaconsfield (8 miles north-east).

Around Danesfield

We fit and service air conditioning in homes and premises around Sir William Borlase's Grammar School and The Dog and Badger pub, among other places. The closest station to Danesfield is Marlow station, about 2.5 miles east. Nearby you will also find Marlow Community Hospital (2.5 miles north-east) and Marlow Museum (2.1 miles east). Not far away are Weycock Hill and Hurley Chalk Pit.

Map of Danesfield © OpenStreetMap contributors

How the job changes from property to property

Heat loss surveys

We look at walls, windows, floors, roofs and ventilation along with the room sizes.

Radiators and underfloor heating

At lower water temperatures, radiators give out less heat so we check them against each room’s heat loss.

Danesfield: your questions answered

Is the heat pump grant available in Danesfield?

Yes, the scheme covers homes in England, including Danesfield, if they qualify. It gives £7,500 towards an air-to-water or ground source heat pump, or £2,500 towards an air-to-air heat pump that replaces the fossil-fuel heating and meets the whole home’s heating need. We hold MCS certification, so the application is ours to make for you.

Is a heat pump in Danesfield permitted development?

It comes down to the building and the spot chosen for the outdoor unit. Central Danesfield is a short walk from the Harleyford and Wittington Conservation Area. On a house, an air source heat pump can often go ahead under permitted development, with an outdoor unit of no more than 1.5 cubic metres and an installation that meets MCS 020(a), which includes a noise check. Those rights don’t reach the grounds of a listed building, and conservation areas rule out walls or roofs facing a road. If that might affect you, we ask Buckinghamshire council, which is normally the planning authority for Danesfield.

How long will it take to install a heat pump?

As a guide, it takes a few days for most air-to-water installations, with air-to-air systems often quicker. We plan the work so you’re without heating for as little time as possible and agreed before any work starts.

Do you work on systems someone else installed?

Yes. We look at it first and tell you what we find, including any issues with how it was fitted. You get a fixed price before any work goes ahead.

When will I hear back?

On the same working day you contact us. After that, we agree a survey, diagnosis or installation date that suits you, and you get a fixed price before any work goes ahead.

Can you come out in an emergency?

Yes, day and night. When you call, tell us the make, what’s happening and any error code, and we’ll advise on what to do next.

Whose job is it to check the system for leaks?

Whoever operates the equipment, together with the technicians who service it. Systems below 5 tCO2e fall outside the set leak check intervals, while larger ones need checks at least every 12 months, or every 6 months from 50 tCO2e. We’ll work out which band applies to yours.

What we are called out for in Danesfield

Homes off the gas grid, heated by oil or LPG, are often good candidates to look at. The Boiler Upgrade Scheme includes an extra £1,500, until March 2027, for air source or ground source heat pumps in homes heated by oil or LPG with no mains gas, subject to the scheme rules.

Keep an eye out for any of the following:

  • Questions about the Boiler Upgrade Scheme
  • An oil, LPG or gas boiler near the end of its life
  • Moving away from fossil-fuel heating

Live in one of the older houses around Church of St Mary? Expect the survey to look closely at heat loss and at the building’s planning status.

What your quote should include

  • If the quote is based on a survey, photos or a diagnosis
  • Whether extra work needs your approval first
  • If the figure could change on the day

Our hiring checklist

From one of our customers

“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”

David W., Haywards Heath

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead