Hertfordshire · Heat pump installation
Heat pump installation in Bedmond, Hertfordshire
Air source heat pumps in and around Bedmond, from the first look to the final check with the price fixed before work begins.
- Checking whether planning permission is needed
- Not knowing whether a grant applies
- Comparing heat pump types
Before you call an engineer
Write down what you notice: error codes, noises, drips, smells or a drop in performance. It helps us diagnose quickly, and a photo or a short video of the display is even better.
Never try to top up, release or handle refrigerant yourself. The law requires anyone working on equipment containing F gas to hold the right qualifications, and the company to be certified, and escaping refrigerant can cause cold burns. If you suspect a leak, switch the system off and call us.
Air source heat pumps for homes and businesses in Bedmond
For an air-to-water heat pump, the price is £8,000–£16,000 (0% VAT on homes), before the grant. The Boiler Upgrade Scheme can provide £7,500 towards an eligible air-to-water system in England and Wales and the installer makes the application. Not every home qualifies, so we check eligibility before you commit. Common call-outs are for checking whether planning permission is needed and working out where a cylinder could go, on homes heated by oil, LPG or gas, hot water cylinders and air-to-air heat pumps.
For a home around Bedmond that is off mains gas and heated by oil or LPG, an extra £1,500 is available through the Boiler Upgrade Scheme until March 2027, on top of the £7,500.
Each manufacturer sets its own warranty period. Daikin, for instance, gives a standard 2 years on split air conditioning, with longer extensions only on its air-to-water heat pumps. Whatever the brand, the manufacturer’s terms are explained on your quote.
- Where
- Bedmond (WD5)
- Wider area
- Hertfordshire
- Price
- Fixed, in writing
- Certified
- F-Gas certified, NICEIC approved, MCS
- Typical price
- £8,000–£16,000 (0% VAT on homes), before the grant
- Call
- 07833 053749
- Updated
- 30 October 2026
Your questions about air source heat pumps in Bedmond
Will you come out to Bedmond?
Yes, smaller places are covered as well as towns. We’re based in East Grinstead and plan each visit so the job can be finished in one trip where possible.
Does the Boiler Upgrade Scheme cover homes in Bedmond?
Yes, the scheme covers homes in England, including Bedmond, if they qualify. The amount depends on the type of heat pump, and the survey confirms which applies. You do not apply yourself: the MCS certified installer does, which is us.
Do you provide F-Gas records?
Yes. It’s the record a manufacturer or the next engineer will ask to see: the date, the work, and any refrigerant added or recovered.
Is a heat pump permitted development?
Often not in England, as many heat pumps on houses are permitted development provided the conditions are met. These include an outdoor unit of no more than 1.5 m³, compliance with MCS 020(a), not being used solely for cooling and not being within the curtilage of a listed building.
Which manufacturers do you install and repair?
The main ones, including Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries and Hitachi. For new systems, we recommend a brand and model to suit the job and explain why.
Do you survey before quoting?
Yes. Photos often do the job for simple work, while larger systems and faults that need testing are seen on site.
Are you F-Gas certified?
F-Gas certified, NICEIC approved and MCS certified for heat pumps, plus Checkatrade membership. Engineers who handle refrigerant hold their own F-gas qualifications as well.
Why act early in Bedmond
Getting the sizing wrong causes problems that are hard to fix later. Doing the survey properly from the start avoids that. An early booking makes the visit to Bedmond easier to arrange.
Putting the work off seldom saves money. Faults and wear in a system tend to grow, and a system working harder than it should costs more to run. If you’re not sure what’s needed, ring 07833 053749 or drop us a line for straight advice and a fixed price.
Why us?
- Enquiries answered the same working day
- Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba and more
- Covering London and the South East
- A fixed price before any work starts
How it works
Everything the job needs comes with us, from tools and test equipment to ladders and dust sheets. All we ask is clear access to the units, or to where they’ll go, and to the consumer unit. On site, the work takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. If a lane or gateway near Bedmond is tight for a van, let us know and we’ll plan for it.
- It begins with your house and the heating it relies on now.
- Every room’s heat loss is worked out on site.
- The design covers the heat pump, emitters, hot water and outdoor unit.
- You get a fixed price, with any grant and the VAT set out.
- Then it’s fitted, commissioned and registered with MCS.
Before we arrive
- Move furniture away from the wall where we will be working
- Name a contact who can meet us at the agreed time
- Have the make and model of any existing unit to hand
Getting a quote
Photos are the fastest route to a quote: the room or the existing unit, the outside wall or roof where the outdoor unit sits or would go, and the label on any existing unit. Add the address and what you’d like done, and simple jobs can often be priced without a visit.
Advice
Managing agents and facilities teams in Bedmond
From a single flat to a whole estate, you get the same standard: diagnosis, a fixed price, access agreed with the people on site and paperwork at the end.
When the building owner and the occupier are different, the lease or tenancy agreement normally sets out who maintains what. We’re happy to deal with either side and send the records to whoever needs them.
Places near Bedmond
More services for Bedmond
Air source heat pumps around Bedmond
At about 20 miles from central London, Bedmond sits inside the area we cover across London and the South East. On the National Heritage List, around 7 entries fall within 0.5 miles of the middle of Bedmond; The Bell Public House (grade II) is one. That affects heat pumps: listed buildings need consent, and conservation areas limit where the outdoor unit can go under permitted development. Where necessary, we check with the planning team at Three Rivers council, which usually handles Bedmond.
High Elms Manor, roughly 1.5 miles south-east, is a reminder to check your home’s listing status: permitted development does not cover listed buildings. Live in one of the older houses around Church of the Ascension? Expect the survey to look closely at heat loss and at the building’s planning status.
Bedmond is about 3 miles south-east of Hemel Hempstead, in Hertfordshire. Properties in Bedmond get the same service as everywhere we cover: diagnosis first, a fixed price and proper paperwork when we’ve finished. Bedmond is one of 381 towns, villages and districts in Hertfordshire we cover. London, roughly 20 miles off, has its own page on this site.
That includes properties on High Street, Woodland Way and Bluebell Drive and nearby roads. All of WD5 is covered. We also cover Pimlico (1 mile north), Abbots Langley (1 mile south), Kings Langley (2 miles west), Nash Mills (2 miles west) and Westwick Row (2 miles north). We also work in nearby towns such as Watford (4 miles south), Hemel Hempstead (3 miles north-west), St Albans (4 miles north-east) and Welwyn Garden City (11 miles north-east).
Local landmarks in Bedmond
We fit and service air conditioning in homes and premises around Parmiter's School and The Bell Public House, among other places. For rail, the closest station is Kings Langley station, roughly 1.6 miles south-west of the centre. Nearby you will also find Hypocaust Museum (3 miles north-east) and Village Arcade St Albans (3.7 miles north-east). Green spaces nearby include Verulamium Lake and Longspring Wood.
A customer’s words
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager