Hertfordshire · Heat pump installation
Heat pump installers in Batford
Air source heat pumps across Batford and nearby, from the first look to the final check and a fixed price agreed before work begins.
- Working out where a cylinder could go
- Planning and permitted development questions
- Deciding on the outdoor unit position
Homes in Batford and heat pumps
About 25 miles out from central London, Batford is part of the South East area we work across.
If your home is listed, like Childwickbury Manor about 2.9 miles south, listed building consent comes before any heat pump work.
Batford is about 1 mile north-east of Harpenden, in Hertfordshire. Batford gets the same approach as every job we take on: diagnosis first, a fixed price and proper paperwork when we have finished. Count every place we list in Hertfordshire and you reach 381, with Batford on the list. We also work in London, around 25 miles away.
Every address in AL5 and AL4 is covered. You will find streets such as Common Lane, Station Road and Marquis Lane, all of which are in our area. If you are just outside Batford, we cover Harpenden (1 mile south-west), Lea Valley (1 mile east), Mackerye End (1 mile north-east), Bower Heath (1 mile north) and The Folly (1 mile east). Within a short drive, we also cover Watford (11 miles south), Hemel Hempstead (7 miles south-west), Stevenage (9 miles north-east) and St Albans (5 miles south).
What’s near Batford
Locally, jobs take us to houses, flats and workplaces close to Bistro Gautier at the Amble Inn, Sir John Lawes School and Lydekker Park. Batford’s nearest station is Harpenden station, roughly 0.6 miles south-west. A little further out are St Albans City Hospital (4.1 miles south) and Harpenden Museum (0.9 miles south-west). The countryside around Batford includes Verulamium Lake and Wheathampstead Local Nature Reserve.
Air source heat pumps in Batford, done properly
Installing an air source heat pump in a home is zero-rated for VAT until 31 March 2027, then 5%. This is HMRC’s energy-saving materials relief, which applies to homes rather than businesses, and for air-to-air systems we confirm the VAT on your quote. Please treat this as general information rather than tax advice. Typical jobs include ageing boilers that will need replacing and wanting to stop using oil, LPG or gas for heating, across air-to-air heat pumps, underfloor heating and radiator systems.
If your home near Batford has no mains gas, the grant can be bigger. Homes heated by oil or LPG with no mains gas can get an extra £1,500 on the Boiler Upgrade Scheme until March 2027, for an air source or ground source heat pump.
For a fault on a system that may still be under warranty, send us the make, model and installation date. We’ll explain how the manufacturer’s terms are likely to apply before any chargeable work goes ahead.
- Location
- Batford (AL5, AL4)
- Region
- Hertfordshire
- Enquiries
- Same working day
- Approvals
- F-Gas certified company, NICEIC approved, MCS
- Price
- A fixed price before any work starts
- Prices
- £8,000–£16,000 before the grant, 0% VAT on homes
- Call
- 07833 053749
- Reviewed
- 30 October 2026
What we’re called out for in Batford
Homes off the gas grid, heated by oil or LPG, are often good candidates to look at. The Boiler Upgrade Scheme includes an extra £1,500, until March 2027, for air source or ground source heat pumps in homes heated by oil or LPG with no mains gas where the home is eligible.
It’s time to call us if you’re dealing with:
- Checking whether planning permission is needed
- Checking eligibility for a heat pump grant
- Checking emitters for a heat pump
Live in one of the older houses around All Saints? Expect the survey to look closely at heat loss and at the building’s planning status.
What your quote should include
- How VAT is shown, and which rate applies
- Whether a new circuit is included and who certifies it
- Whether you get F-Gas records where refrigerant is involved
Also near Batford
What else we do in Batford
After we’ve gone
Looking after it is simple, and it makes the next visit easier:
- Check eligibility for the Boiler Upgrade Scheme early
- Keep radiators clear
- Check what your manufacturer’s warranty asks of you
Once commissioned, we register the installation with MCS and give you the certificate. File it with the warranty documents for future reference.
Leave space around the outdoor unit. It needs good airflow to collect heat from outside, so keep it clear all year.
Common questions in Batford
Do you cover smaller places like Batford?
Yes, and the size of the place makes no difference to how we work. Visits to smaller places are planned so the engineer arrives with what the job needs.
Does the Boiler Upgrade Scheme cover homes in Batford?
Yes, if the home and the heat pump meet the scheme’s rules: Batford is in England, where it applies. It gives £7,500 towards an air-to-water or ground source heat pump, or £2,500 towards an air-to-air heat pump that replaces the fossil-fuel heating and meets the whole home’s heating need. We hold MCS certification, so the application is ours to make for you.
Can you look at a system you didn’t fit?
Yes. We work on systems fitted by other installers as well as our own from all the leading brands. Tell us the make and model and send any paperwork you have.
Is there a survey before the work?
Yes, every time. We diagnose before we treat: the survey tells us what the job needs and how to do it and the fixed price is built on it.
Will my radiators work with a heat pump?
It depends on each radiator and the room it heats. At the lower temperatures a heat pump uses, radiators need more surface, and the survey checks each one.
Which accreditations do you hold?
As the law requires for refrigerant work, we are an F-Gas certified company. We’re also NICEIC approved, MCS certified for heat pumps and Checkatrade members.
What warranty do I get?
It’s the manufacturer’s, and the terms are theirs. Some terms depend on regular servicing by a qualified engineer so it’s worth keeping the service records.
Rented and managed buildings
Running several properties is easier with one contractor. We work across London and the South East, so work at different addresses can be planned together and kept on a regular cycle.
Whether it’s one property or many, you get the same standard: diagnosis, a fixed price, access agreed with the people on site and paperwork at the end.
What happens on the day
There’s very little for you to do on the day. Someone needs to let us in and show us the units, or where they’re going, and the rest is down to us. At the end, we tidy up and run through the work with you. Let us know how to reach the outside wall or outdoor unit at your property near Batford.
- You tell us about the home and what you want from a heat pump.
- The survey checks heat loss, emitters, hot water and the outdoor unit position.
- We recommend air-to-water or air-to-air and check the grant position.
- We install the heat pump and connect it up.
- The job ends with commissioning, the MCS certificate and a walk through the controls.
How to prepare
- Mention any roof access, ladders or high-level work
- Let us know if the building has a permit or sign-in process
- Clear the space around the indoor unit, or where it will go
Getting a price
Every quote starts with a look at the job, either on a site survey or, for simple jobs, from your pictures and details. After that, we send a fixed price so you know the cost before we begin.
Read more
What a customer said
“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”
David W., Haywards Heath