Hertfordshire · Heat pump installation
Heat pump installation in Barwick, Hertfordshire
We cover Barwick for heat pump installation. A look at the job first, a fixed-price quote and written records at the end.
- Wanting to stop using oil, LPG or gas for heating
- Not knowing whether a grant applies
- Comparing heat pump types
How we handle air source heat pumps in Barwick
A heat pump takes heat from the outside air and moves it into your home with electricity running the compressor and fans. It works on the same principle as air conditioning, run the other way, and air-to-air heat pumps are sometimes simply called air conditioning. The work covers air-to-water heat pumps, hot water cylinders and air-to-air heat pumps, and people most often call us about working out where a cylinder could go and questions about listed buildings or conservation areas.
For a home around Barwick that’s off mains gas and heated by oil or LPG, an extra £1,500 is available through the Boiler Upgrade Scheme until March 2027, on top of the £7,500.
Each manufacturer sets its own warranty period. For example, Daikin’s standard warranty on split air conditioning is 2 years, and its longer extensions apply to its air-to-water units only. For any other brand, we explain the manufacturer’s terms on your quote.
- Location
- Barwick (SG11)
- Wider area
- Hertfordshire
- Pricing
- Fixed-price quote after a site survey
- Price guide
- £8,000–£16,000 before the grant, 0% VAT on homes
- Certified
- NICEIC approved, F-Gas certified, MCS
- Enquiries
- Answered the same working day
- Telephone
- 07833 053749
- Page updated
- 30 October 2026
Aftercare tips
Systems last better with the right care. Here’s what we suggest:
- Leave indoor units unobstructed
- Check what your manufacturer’s warranty asks of you
- Look at insulation alongside the heat pump
Should you have questions after the install, give us a ring on 07833 053749 or use the quote form and we will look into it. Annual servicing helps keep the system working well.
Keep the outdoor unit clear of leaves, plants and stored items. Airflow is what it runs on, so keep it clear all year.
Why it’s worth doing now in Barwick
Getting the sizing wrong causes problems that are hard to fix later. Doing the survey properly from the start avoids that. For a village like Barwick, booking ahead lets us plan the trip properly.
Every job is different, so each one gets its own fixed-price quote. The equipment, how we reach it, the route between units and the work needed all make a difference.
Why people in Barwick choose us
- Covering London and the South East
- MCS certified heat pump installers
- Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba and more
- Members of Checkatrade
See what air conditioning costs or our accreditations and certificates.
Nearby places to Barwick
Also in Barwick
Air source heat pumps around Barwick
The 2021 Census found about 67% of households in detached or semi-detached houses. Houses usually have space for an outdoor unit and a hot water cylinder.
Older homes near St Mary's may need extra checks for planning and heat loss before a heat pump is designed. If your home is listed, like Much Hadham Palace about 2.9 miles east, listed building consent comes before any heat pump work.
Barwick is about 3 miles north-east of Ware, in Hertfordshire. From the centre of Barwick to the outskirts, our engineers cover air source heat pumps, from small jobs to large ones. Count every place we list in Hertfordshire and you reach 381, with Barwick on the list. London is in our area too, around 25 miles away.
We work across SG11. We also cover the places around Barwick: Colliers End (1 mile north-west), High Cross (1 mile south-west), Standon Green End (2 miles west), Cold Christmas (2 miles south) and Wadesmill (2 miles south-west). Larger places within reach include Stevenage (9 miles north-west), Bishop's Stortford (6 miles east), Welwyn Garden City (9 miles south-west) and Harpenden (15 miles west).
Near you in Barwick
The closest station to Barwick is Ware station, roughly 3.7 miles south-west. Other landmarks nearby include Hertford County Hospital (5.8 miles south-west) and Barrowfield (4.5 miles south-west). The countryside around Barwick includes King's Meads.
Questions from Barwick
Do I need planning permission for a heat pump in Barwick?
It comes down to the building and the spot chosen for the outdoor unit. Around 6 listed entries sit within 0.5 miles of central Barwick. On a house, an air source heat pump can often go ahead under permitted development, with an outdoor unit of no more than 1.5 cubic metres and an installation that meets MCS 020(a), which includes a noise check. Those rights do not reach the grounds of a listed building, and conservation areas rule out walls or roofs facing a road. If that might affect you, we ask the local planning authority (for Barwick, normally East Hertfordshire council).
Can I get the Boiler Upgrade Scheme grant in Barwick?
Yes, the scheme covers homes in England, including Barwick, if they qualify. It gives £7,500 towards an air-to-water or ground source heat pump, or £2,500 towards an air-to-air heat pump that replaces the fossil-fuel heating and meets the whole home’s heating need. As an MCS certified installer, we apply for it on your behalf.
Do you survey before quoting?
Yes. Photos often do the job for simple work, while bigger systems and repairs that need testing get a visit.
Does servicing affect my warranty?
Each manufacturer decides. Where servicing is a condition, a missed service could give the manufacturer grounds to refuse a claim, so we explain the terms on your quote.
Do you work for landlords and businesses?
Yes. From a single let flat to offices, shops and public buildings, the approach is the same: a look first, a fixed-price quote and written records.
Are my radiators big enough for a heat pump?
We find out during the survey. Rooms where the radiator is big enough stay as they are and any changes are in the quote.
Can you set up regular servicing?
Yes. Tell us what you have and how it’s used and we’ll propose a schedule and quote for it. That can include the leak checks the F-gas rules require for larger systems.
How it works
The visit has three parts, a bit like a doctor’s appointment: diagnose, treat and sign off. First we check the system or the space against the plan, then we do the work, and finally everything is tested, recorded and explained. The middle part takes longest, which takes from a couple of days to around a week, depending on the system and how much of the heating changes. A few photos help us make the most of a visit to Barwick.
- We find out about your home and the heating you have now.
- We measure heat loss for every room.
- We design the system, check the radiators and cylinder and look at the outdoor unit position.
- Cost, grant and VAT appear on one fixed-price quote.
- Then it’s fitted, commissioned and registered with MCS.
Getting ready for the visit
- Clear the space around the indoor unit, or where it will go
- Plan for pets to be kept clear during the visit
- Arrange for someone to be there to let us in
How to get a quote
Every quote shows the VAT clearly, and the rate that applies to your job is stated. Homes, businesses and different kinds of work can be treated differently for VAT, so we confirm it in writing rather than guess. For a fixed-price quote, ring 07833 053749, or email if that’s easier.
Advice
System by system
Hot water cylinders
The cylinder size depends on how much hot water the household uses.
Radiators and underfloor heating
If radiators need upsizing, the quote lists them, so the work is clear.
What a customer said
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager