Medway · Commercial air conditioning
Cooling Street commercial air conditioning
Need commercial air conditioning in Cooling Street? We diagnose first, fix the price and book the work around you, then sign it off with written records.
- Workspaces that overheat on warm days
- IT rooms that need resilient cooling
- Commercial systems near the end of their life
Commercial air conditioning in Cooling Street
Heating, cooling and fresh air often go together. Air conditioning systems can heat as well as cool, and we also install ventilation and MVHR, so the building works as a whole. If you’re dealing with systems over 12 kW due a TM44 inspection and workspaces that overheat on warm days, we can sort it out.
For a business near Cooling Street, outdoor units normally have room at the back of the building, out of sight and away from neighbours.
For a fault on a system that may still be under warranty, send us the make, model and installation date. We will explain how the manufacturer’s terms are likely to apply before any chargeable work goes ahead.
- Location
- Cooling Street (ME3)
- Wider area
- Medway
- Prices
- Priced once we have surveyed
- Certified
- F-Gas certified company, NICEIC approved
- Quote
- Fixed after a survey or photos
- Response
- Answered the same working day
- Telephone
- 07833 053749
- Last updated
- 30 October 2026
Commercial air conditioning around Cooling Street
Cooling Street lies within about 3 miles of the sea. Rooftop and wall-mounted plant near the sea needs protecting from salt air, through position, coil coatings where available and regular maintenance. Food Standards Agency records list about 3 schools and colleges and about 3 care homes, nurseries and hospitals within 1.5 miles or so of the middle of Cooling Street. Restaurants, hotels, schools and care settings each need cooling designed for their hours and heat loads.
A bursar or site manager at a school like Cliffe Woods Primary School will want the install planned around the school calendar, and we work to that. Clinics, dental practices and pharmacies around French Hospital (about 3.8 miles south) normally want quiet indoor units with filters that are simple to keep clean.
Cooling Street is about 4 miles north of Rochester, in Medway. Homes and businesses alike in Cooling Street, our engineers can help with commercial air conditioning. We reply to enquiries the same working day, and there’s a 24/7 emergency line. Our Medway coverage runs to 68 places, Cooling Street among them. You can also see our page for Bromley, about 22 miles away.
Postcode districts we cover here: ME3. Close to Cooling Street, our area also takes in Cooling (1 mile north-east), Chattenden (2 miles south-east), Wainscott (2 miles south), Lower Upnor (2 miles south) and High Halstow (2 miles east). We also work in nearby towns such as Gillingham (6 miles south-east), Chatham (6 miles south), Rochester (4 miles south) and Rainham (7 miles south-east).
What’s near Cooling Street
Around Cooling Street, our work takes us to homes and businesses near The Hundred of Hoo Academy. Cooling Street’s nearest station is Higham station, roughly 2.2 miles south-west of the centre. Well-known places in the area include Huguenot Museum (3.7 miles south) and French Hospital (3.8 miles south). The countryside around Cooling Street includes Gad's Hill and Rede Common.
Nearby places to Cooling Street
More services for Cooling Street
Landlords, agents and facilities managers
We also work for facilities teams in offices, schools and public buildings in Cooling Street and across Medway. Work can be phased by floor, zone or building to keep disruption down.
We work for landlords, letting agents and managing agents as well as homeowners and businesses. Tell us who the contact on site is and who should receive the paperwork, and we’ll keep everyone informed.
Before you call an engineer
For air conditioning, cleaning the indoor unit’s filters is the main job owners can do, if the manual says so. With the power off, they lift out, can be vacuumed or rinsed and must be fully dry before they go back. For a heat pump, the main owner jobs are a clear outdoor unit and sensible control settings.
Owners can handle the everyday basics: keeping the outdoor unit clear, checking the mode and set temperature, and the routine cleaning in the manual. Anything inside the units, the electrics and the refrigerant is engineer’s work.
How the visit works
The visit has three parts, a bit like a doctor’s appointment: look, put right and sign off. First we check the system or the space against the plan, then the work itself, and finally we test, record and explain. Most of the time goes on the middle part, and that takes from a couple of days for a few cassettes to a planned programme for a whole building. Pictures of the space and where the outdoor unit could go let us plan the work in Cooling Street.
- We visit the site to look at the building, how it’s used and what the system needs to do.
- The written quote is fixed and lists the plant, where it goes and the order of works.
- The work is planned around your opening hours, with out-of-hours or phased work where it helps.
- The system goes in, from units and pipework to drainage, wiring and controls.
- Finally it’s commissioned and handed over, with the refrigerant records and manuals for your files.
How to prepare
- Make sure we can reach the outdoor unit, or where it will go
- Let us know where we can park and unload
- Make sure we can reach the consumer unit or fuse board
Get a fixed-price quote
The quickest way to a quote is to send photos: the inside and outside of the property where the work is, plus the rating plate of any unit already there. Tell us the address and what you need, and simple jobs can often be priced without a visit.
Related advice
Your questions about commercial air conditioning in Cooling Street
Is Cooling Street in your area for commercial air conditioning?
Yes, Cooling Street is within the area we cover. Get in touch with the details and we reply the same working day.
Is Cooling Street within the area you cover?
We do. Villages and hamlets get the same service as the bigger towns. We’re based in East Grinstead and plan each visit so the job can be finished in one trip where possible.
What are the F-gas responsibilities for commercial air conditioning?
Responsibility is shared between the operator and the certified technicians who work on the system. The operator needs to arrange leak checks and keep records where the system requires them and we handle that for you.
Will skipping a service affect the warranty?
Each manufacturer decides. Where servicing is a condition, a missed service could give the manufacturer grounds to refuse a claim, so we explain the terms on your quote.
When will I hear back?
We reply to enquiries the same working day. If it’s an emergency, ring the 24/7 line instead.
Are you F-Gas certified?
AirCon Doctor is an F-Gas certified company, with NICEIC approval for electrical work and MCS certification for heat pumps. We are also Checkatrade members.
Will you work on another installer’s system?
Yes. Systems fitted by other companies are fine from all the leading brands. Tell us the make and model and send any paperwork you have.
How the job changes from property to property
Offices
Meeting rooms and open-plan areas often need separate control and zoned systems make that possible.
F-gas records and TM44
For systems from 5 tCO2e upwards, the operator is responsible for leak checks and records. We do the checks and give you the paperwork.
What a customer said
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead