Kent · Heat pump installation
Air Source Heat Pumps in Stansted
For heat pump installation in Stansted, one call is all it takes: diagnosis, fixed price, work and sign-off. An F-Gas certified company, NICEIC approved, on Checkatrade.
- Deciding which kind of heat pump suits the home
- Radiators that may be too small for a heat pump
- Questions about where the outdoor unit can go
How we handle air source heat pumps in Stansted
Every installation starts with a heat loss survey. That tells us how much heat the home needs, room by room so the system is sized to match. Sizing by rule of thumb isn’t good enough. If you’re dealing with wanting to stop using oil, LPG or gas for heating and not knowing whether a grant applies, we can help.
In a place like Stansted, some homes are listed, because permitted development doesn’t apply within the grounds of a listed building, so we check consent first.
Refrigerant work is written up in the F-Gas records: the work carried out, the refrigerant involved and the quantities. Keep the records with the manual and the warranty documents, ready for the next service or a warranty query.
- Where
- Stansted (TN15)
- Wider area
- Kent
- Costs
- Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
- Accreditations
- NICEIC approved, F-Gas certified, MCS
- Replies
- Answered the same working day
- Price
- A fixed price before work begins
- Phone
- 07833 053749
- Last updated
- 30 October 2026
Questions from Stansted
Will you come out to Stansted?
Yes. Stansted is within the area we cover across London and the South East. Visits to smaller places are planned so the engineer arrives with what the job needs.
Can I fit a heat pump in Stansted without planning permission?
The answer turns on the property and where the outdoor unit would sit. There’s a conservation area, the Stansted Conservation Area, close to central Stansted. A heat pump on a house can be permitted development if it meets the conditions, including the MCS noise check, but not within the grounds of a listed building, and in a conservation area the outdoor unit can’t face a road. Where necessary, we check with the local planning authority (for Stansted, normally Tonbridge and Malling council).
Can landlords and managing agents book you?
Yes. From one rented home to commercial buildings, the approach is the same: a look first, a fixed-price quote and written records.
Should I choose air-to-water or air-to-air?
Air-to-water feeds your central heating and hot water, while air-to-air warms and cools rooms directly. Air-to-air does not heat hot water and the survey helps decide.
Which manufacturers do you install and repair?
We install and work on the leading makes, including Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries and Hitachi. Tell us the make and model and we will take it from there.
What does F-Gas certified mean?
Certification shows a business is approved to work on systems that hold F gas refrigerant. That isn’t optional: it’s required by law, and AirCon Doctor is certified.
Who has to arrange F-Gas leak checks?
Responsibility is shared between the operator, normally whoever owns or controls the equipment, and the service technicians. The interval depends on the refrigerant charge, measured in tonnes of CO2 equivalent: at least every 12 months from 5 tCO2e, and every 6 months from 50 tCO2e.
Also near Stansted
Also in Stansted
Fixed-price quotes for air source heat pumps in Stansted
Jobs vary more than people expect. What affects the quote:
- The brand, model and parts involved
- The number of rooms, units or zones
- How far the pipework has to run, and where
The price reflects the work, not guesswork. That is why we look at the job first, from photos or on a survey, and the price is agreed before any work starts.
Asking for a quote
Good pictures often save a visit. The most useful are:
- The paperwork from the last service, if you have it
- Your consumer unit or fuse board
- The outdoor side of the property, including any roof or flat area
To help us quote: the address and the type of property, a few pictures, the brand and model of anything already fitted and anything you’ve noticed, such as an error code or a noise. Once you have those, call 07833 053749 or write to us at info@aircondoctor.co.uk.
What happens if it’s left?
Planning rules have specific conditions. We look at the planning position early, so there are no surprises covering listed buildings, conservation areas and any Article 4 direction. For a village like Stansted, booking ahead lets us plan the trip properly.
Putting the work off seldom saves money. Small problems, from blocked filters to slow leaks, tend to get worse, and a struggling system uses more electricity to do less. If you are unsure, call us on 07833 053749 or email us and we will give you an honest view and a fixed price.
Why book with us
- Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba and more
- One contact for properties across the South East and London
- Every job looked at before it’s priced
- A reply the same working day
See our cost guide and how to check a contractor.
Homes in Stansted and heat pumps
About 74% of households live in detached or semi-detached houses, according to Census 2021 figures. Detached and semi-detached houses typically have room for the outdoor unit and a cylinder.
Period properties close to Church of St Mary can suit a heat pump, though insulation and any heritage protection are checked first. With Lullingstone Castle about 4.7 miles west, it’s worth asking whether your own home is listed before planning a heat pump.
Stansted is about 6 miles north-east of Sevenoaks, in Kent. If you need air source heat pumps in Stansted, please phone 07833 053749 or fill in the contact form for a fixed-price quote. Our area covers London and the South East, including Stansted. Stansted is one of 922 towns, villages and districts in Kent we cover for homes and businesses. The nearest of our city pages is Bromley, around 13 miles from Stansted.
Not far from Stansted, a recent job of ours was on Station Road, Orpington (BR6), about 9 miles west: installing three Daikin cassette units in the main office area and a wall-mounted unit in the client meeting room.
All of TN15 is within our area, from the main roads to the quietest streets. If you need air source heat pumps at a property on Parsons Lane, Plaxdale Green Road and Hatham Green Lane or anywhere close by, we can help. Other places close to Stansted include Ash (2 miles north), West Kingsdown (2 miles north-west), West Yoke (2 miles north), Knatts Valley (2 miles west) and Fawkham Green (2 miles north). Within a short drive, we also cover Maidstone (11 miles south-east), Dartford (8 miles north-west), Sevenoaks (6 miles south-west) and Royal Tunbridge Wells (14 miles south).
Near you in Stansted
Around Stansted, our work takes us to homes and businesses near Trosley Country Park and the streets around them. Stansted’s nearest station is Borough Green & Wrotham station, roughly 2.9 miles south. Well-known places in the area include Sevenoaks Hospital (5.5 miles south-west) and Ightham Court (2.8 miles south).
What happens on the day
Refrigerant work is done by qualified engineers working for an F-Gas certified company, while the electrical side is covered by our NICEIC approval. On the day, both are in the same hands. On site, it takes several days for an air-to-water system with a new cylinder, less for an air-to-air system. Photos of the room and the outside of the property help us plan a visit to Stansted.
- You tell us about the home and what you want from a heat pump.
- We survey for heat loss and look at radiators, cylinder space and outdoor unit options.
- You get our view on the right type for the house, and on whether the Boiler Upgrade Scheme applies.
- We install the heat pump and connect it up.
- We commission it, complete the MCS certificate and show you how to use it.
Getting ready for the visit
- Let us know where we can park and unload
- Make sure someone can let us in at the agreed time
- Let us know where the consumer unit is
Getting a price
Some jobs can be priced from pictures, while others need a survey. Multi-room systems, commercial buildings and anything with a long or hidden pipe route are normally surveyed first. Either way, you get a fixed price before any work is booked.
Related advice
What air conditioning won’t do
Some problems need a different service or another trade:
- Draught-proofing and insulation upgrades
- Disconnecting or servicing a gas boiler
- Tax rulings, which only HMRC can give
Not sure which it is? You can give us a ring on 07833 053749 or send an email and we will tell you honestly before you book.
Parts of the system we cover
- Air-to-water heat pumps
- Hot water cylinders
- Radiator systems
- Air-to-air heat pumps
- Underfloor heating
- Homes heated by oil, LPG or gas
What a customer said
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead