Milton Keynes · Heat pump installation

Heat pump installation in Mursley, Milton Keynes

Air source heat pumps in and around Mursley, from a site survey or diagnosis to sign-off and a fixed price agreed before we start.

  • Choosing between air-to-water and air-to-air
  • Checking eligibility for a heat pump grant
  • Ageing boilers that will need replacing

Air source heat pumps in Mursley and nearby

Air source heat pumps around Mursley

Census 2021 figures found about 87% of households in detached or semi-detached houses. Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these.

If your home is listed, like Bletchley Park about 4.5 miles north-east, listed building consent comes before any heat pump work.

Mursley is about 4 miles south-west of Bletchley, in Milton Keynes. From the centre of Mursley to the outskirts, our engineers cover air source heat pumps, from a single room to a whole building. Mursley is one of 73 places in Milton Keynes we cover. London, roughly 44 miles off, has its own page on this site.

If your postcode is in MK17, you are inside the area we cover. We cover homes and businesses on Main Street, Station Road and The Beechams and the roads around them. We also cover Swanbourne (1 mile south-west), Little Horwood (2 miles north-west), Dunton (3 miles south), Winslow (3 miles west) and Great Horwood (3 miles north-west). Further out, we also cover Milton Keynes (6 miles north), Bletchley (4 miles north-east), Newport Pagnell (10 miles north) and Bletchley and Fenny Stratford (5 miles north-east).

Near you in Mursley

Around Mursley, our work takes us to homes and businesses near The Green Man pub and Swanbourne House School and the streets around them. Mursley’s nearest station is Bletchley station, about 4.5 miles north-east of the centre. Well-known places in the area include Drayton Parslow Mound (1 mile east) and Bletchley Community Hospital (4.4 miles north-east). For a walk, there’s Blue Lagoon and Blue Lagoon Park.

Map of Mursley © OpenStreetMap contributors

About our air source heat pumps in Mursley

Heat pumps run at lower flow temperatures than most boilers, so radiators may need to be larger to give out the same heat. We check each radiator against the room’s heat loss, and the quote sets it out. Common call-outs are for checking emitters for a heat pump and questions about listed buildings or conservation areas, across air-to-water heat pumps, underfloor heating and hot water cylinders.

If your home in or near Mursley is heated by oil, LPG or electric heaters with no mains gas, the Boiler Upgrade Scheme adds an extra £1,500 until March 2027 for an air source or ground source heat pump, on top of the £7,500.

Some warranty terms depend on the system being serviced regularly by a qualified engineer. If that applies to your system, booking the service on time keeps the record straight and each visit is recorded.

Place
Mursley (MK17)
Wider area
Milton Keynes
Certified
F-Gas certified, NICEIC approved, MCS
Costs
£8,000–£16,000 (0% VAT on homes), before the grant
Quote
A fixed price before any work starts
Call
07833 053749
Reviewed
30 October 2026

FAQs for Mursley

Do I need planning permission for a heat pump in Mursley?

That depends on the building and where the outdoor unit goes. There’s a conservation area, the Mursley Conservation Area, close to central Mursley. The permitted development rules for heat pumps leave out listed buildings and stop outdoor units going on road-facing walls or roofs in conservation areas. Anything outside the rules needs an application, and we raise it with the local planning authority (for Mursley, normally Buckinghamshire council) first.

Is the heat pump grant available in Mursley?

Yes, if the home and the heat pump meet the scheme’s rules: Mursley is in England, where it applies. For an air-to-water heat pump the amount is £7,500; an air-to-air system can get £2,500 if it replaces the fossil-fuel heating outright, meets the home’s full heating demand and isn’t an add-on to a boiler. As an MCS certified installer, we apply for it on your behalf.

Who is responsible for leak checks?

The F-gas rules share it between the equipment’s operator and the engineers who work on it. How often depends on the size of the refrigerant charge in tonnes of CO2 equivalent: at least every 12 months from 5 tCO2e, and every 6 months from 50 tCO2e.

Does servicing affect my warranty?

Each manufacturer decides. Where servicing is a condition, a missed service could give the manufacturer grounds to refuse a claim and we’ll tell you what your brand asks for.

Can I fit air conditioning or a heat pump myself?

No, not the refrigerant side. The F-gas rules require certified companies and qualified engineers for it, and a new electrical circuit is notifiable building work unless a registered competent person does it.

Can you set up regular servicing?

Yes. Send details of the systems and how they’re used, and we will suggest a schedule with a fixed price. Leak checks required by the F-gas rules can be built in for larger systems.

Will you make a mess?

Floors and furniture near the work are covered with dust sheets before any work starts, and we tidy up as we go. Before we leave, we clear up and run through the work with you.

Do you need air source heat pumps in Mursley?

Some homes heated by electric heaters or storage heaters consider a heat pump instead. A survey shows whether a heat pump suits the property and what would need to change, and we explain the grant position for your home.

What we’re most often called about:

  • A boiler that’s getting old
  • Planning and permitted development questions
  • Questions about the Boiler Upgrade Scheme

Older homes near Church of St Mary may need extra checks for planning and heat loss before a heat pump is designed.

What to look for in a quote

  • Whether you get F-Gas records where refrigerant is involved
  • If the quote is based on a survey, photos or a diagnosis
  • Whether a new circuit is included and who certifies it

Choosing an air con installer

Owner checks or an engineer?

Leave the units and pipework where they are. Disconnecting a system means dealing with refrigerant, which only a qualified engineer can do, and the electrical side needs a competent person. Ask us to quote for a move instead.

Keep a note of anything odd: error codes, noises, drips, smells or a drop in performance. It makes our diagnosis quicker, and a photo or a short video of the display is even better.

How it works

We keep the work area tidy as we go, with sheets down and mess cleared as we go. Any holes, fixings or cable routes are agreed with you before we drill. The visit takes several days for an air-to-water system with a new cylinder, less for an air-to-air system. Seeing the property in photos first means the trip to Mursley can be planned properly.

  1. First, a chat about the property and your goals for the heating.
  2. We survey for heat loss and look at radiators, cylinder space and outdoor unit options.
  3. We recommend air-to-water or air-to-air and check the grant position.
  4. We install the heat pump and connect it up.
  5. We commission it, complete the MCS certificate and show you how to use it.

How to prepare

  • Tell us about any building rules, permits or sign-in
  • Mention any parking restrictions near the property
  • Arrange for someone to be there to let us in

Get a fixed-price quote

Every quote shows the VAT clearly, with the rate that applies to your job. Homes, businesses and different kinds of work can be treated differently for VAT, so we confirm it on the quote. To get one, call 07833 053749 or fill in the contact form.

Get a price

Advice

How the job changes from property to property

Heat loss surveys

The survey works out the heat needed room by room. It’s the basis for sizing the heat pump and the radiators.

Air-to-air heat pumps

The £2,500 grant for air-to-air applies only when the system replaces the fossil-fuel heating and covers the whole home’s demand. It must be installed by an MCS certified installer and be in a home.

What a customer said

“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”

David W., Haywards Heath

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead